Connecting Cisco Router to DSL Modem with ISP Configurations

Learn how to configure a Cisco Router to DSL model and your home or small office ISP. Same concepts apply to configuring a cisco router to your home network or home wireless. This video will walk you through how to configure a small little Internet Service Provider and then we will configure step by stem your Cisco Router to connect to your dsl modem.
We will configure a Web Server, DNS Server, DHCP, Inter Vlan Routing, and NAT.
Please, do not forget to like and subcribe to the channel for more videos.
Take my Access Control Lists Course for $9.99usd.
www.udemy.com/...
Take my Cisco CCNA iOS Administrations Labs Course for $9.99usd.
www.udemy.com/...

[@victordipersia]

Very informative, I've got to try it, although I must say that this is like teaching someone how to drive but the minimum speed must be 100 MPH, take it easier... slow it down, include more details especially in the North/South leg which is what sits in ppl's homes. Jussayin'

[@ryanlopez5993]

Holy crap this was good. Just what I needed and I didnt have to watch a video posted by someone with a very heavy accent!

[@GG_Booboo]

There's nothing wrong with having a heavy indian accent, if it's indians who are dominant in the IT industry so what, just don't choose to listen to it

[@blacknova6895]

@@GG_Booboo Networking industry u mean.

[@rdeepm]

Or a heavy LATIN accent :)

[@user-qc9rq3vb2z]

Yeah man , screw those people who decide to take their time and release free tutorial videos !

[@andrestorres9188]

Bro thanks again for this video, I was racking my brain on how to get sub interfaces to work. And when I saw you set up the ACL it just clicked! Thank you so much !!!!

[@joaquinluceromusic]

huh I followed every single step and I made it! kudos to LTT!!! now it is time to use my gear to configure SOHO-ROUTER 1841 down to 2960g switch and pcs.. again thank you!

[@pradeep9979]

its WOW !!!, superb !!! i want to see more video about NAT and ACL, please share the link

[@rev.kenshostad2888]

Nice, you clearly like your coffee, or are you just enjoy your IT... I've been trying to setup a ER605 with a Cable ISP and DSL ISP, having issues and called the tech's at Tp-link to get help they told me it can't be done at all... However, I've watched several KZbin videos on the matter and with the same Item and they say it can but don't show how they did it... LOL... Anyway, I enjoyed your video and have liked and subscribed to see more, perhaps with your helpful videos I will figure out how to do this... May GOD Bless you and yours... AMEN...

[@user-db5rk7ml6z]

Hi! Why Router SOHO not receive IP if to USE Cable Modem instead DSL?

[@jayraw44]

Damn Job Lab. Just a little fast. However i was able to keep up. This is exactly what i needed

[@wolftng359]

Thank goodness there is a pause button! Lol

[@Yamukoo]

Superb.... i'm clear with my doubt so far .. thankzz ❤️

[@TheChaosScience]

These videos are gold! Thank you for making them

[@xinyuwang6256]

Thank you for making the things clear.

[@glenntembo2693]

I always give credit where it's due. Thanks. Keep educating us. Definitely subscribed

[@arvinbriones4032]

Nice video sir. May i ask? Did you already configure the routing protocol like static and dynamic?

[@leechiqz8819]

this is what i have been searchin for.!Thnks Man...

[@mos8397]

Nice, just in time to get ahead of the class

[@predragpetrovic421]

Great video! Thanks!

[@turkishh.videos5542]

hello an urgent question... can i use this for a dial up connection from the isp to the router ?

[@turkishh.videos5542]

i mean the dsl modem

[@Hunter-qm3qb]

Really good information! Thank you for the video.

[@ethiochill12]

THIS HELP ME ALOT!! THANK YOU

[@taddy666]

Brilliant. Cheers mate!

[@scottsmyth1862]

awesome thanks

[@worldweltweit6929]

Thank u so much

[@Willian2009Stive]

Amazing!! TKS

[@lohti6399]

You need to set static route for the SOHO router. The ISP router cannot be seen.

[@whateverthismeans7]

Brilliant - Thank you for taking the time to put this together. Have liked and subbed. Cheers!

[@TogetherWeCanWinNPP]

This was very helpful. Thank you..!!!

[@paulsquickflicks]

how do i configure the STAFF PC though? i've tried but it does not work, what should i put as ip address, subnet mask, default gateway and dns??? thanks for the help

[@mikes5819]

can you make a video on getting internet with fiber no modem

[@allenmostafa9382]

Amazing video man, keep it coming.

[@insightsmundoafora]

Thank you for share!

[@SimpleTipsPh]

How to configure nat if i use multilayer switch for my vlan?

[@Mike-yz6nf]

what if you wanted to connect another SOHO to your "ISP"?

[@Mike-yz6nf]

I assume you would need to setup another DSL connection on the cloud but would it go to the same eth or would it need to go to a new one?

[@nizamyuseri4058]

BADA BING BADA BOOM

[@BHMSTW]

awesome man！

[@tenzindalha5852]

i love you

[@henryj9579]

hello if i done that and i want to add another modem,router and switch it the same way to config it?

[@gambettonsa4528]

Dont you have to provide credentials to your ISP like PPPoe username and password? why only use DHCP?

[@DX91001]

I gave it a like. I just wish he went a little slower! HYPER!!! LOL

[@bangapin8304]

How to tuneling site to site. please send tutorials

[@an_1937]

I need to connect more than one network from cloud. How can i do it

[@gulzaibkhan6913]

can we ping these routers via my laptop? kindly tell

[@changkinwai7716]

So, this is a office network that can surf the Internet? What about 2 branches of offices that wanted to have a WAN link between them, but still having the Internet at the same time?

[@hassandoghan9866]

u explain is very good but text is very small

[@MrJalilsimo]

can i confugure VPn bitween routers SOho and ISP Thanks ??

[@allenmostafa9382]

Can you just please tell us how to subnet the last PC, which is the STAFF PC. It is really important to know that. Thanks

[@LearnTechTraining]

Allen, Everything in this topology is already configured for the second computer on the actual routers and switches. To address the second computer you follow the same process as we did on the “HR” PC. Go to the computer NIC and statically configure the IP. You will want to use 172.16.10.10/24 and 172.16.10.1 as your gateway.

[@dumpstuntin]

How do you do it if you have a Verizon gateway which hands out dhcp private class c addresses from the Lan ports?

[@andrestorres9188]

Hi so how I have this set up is follows gi0/0 on my 2821 is connected to my Verizon Router/gateway I have a NAT translation set to allow my inside NAT to send all the traffic to gi0/0 gi0/0 is set to dhcp allowing the Verizon router to assign a private class c address 192.168.1.X /24

[@pradeep9979]

Do you mind , Can i have this practice lab's configuration.

[@LearnTechTraining]

You can use this video as long as you credit me. Keith Gebhardt. Google me I’ve been a Cisco trainer for years and I’m on many platforms. I’m here to help people.

[@Spectre.007]

I followed everything but tge hr pc doesnt ping to DNS and ISP ROUTER

[@fgrion]

same! i think the nat setup is wrong. I will try again but something is missing

[@quinnn449]

Hi ....is it possible to connect a IP phone in this network?

[@Jamie41yukon]

yeah but it's a different process

[@jordanianpinaywife8756]

hello i want to get this lab please i want the file

[@prezlamen]

You should make next time everything bigger,it is hard to see

[@bangapin8304]

modem to modem

[@mahyki7158]

The quality is not good

[@wallyj2620]

Connecting the router to the modem was so brief and not detailed at all. Should include packet tracer in the title. Misleading garbage

[@LearnTechTraining]

Anyone with a set of eyes can see that the thumbnail is packet tracer.

[@wallyj2620]

@@LearnTechTraining My set of eyes dont matter. What matter are the title which youtube categorized based on your tite. KZbin algorithms dont have a set of eyes

[@double_DD]

definetly you are going too fast, and not explaining anything in detail, you are just talking, so I am not satisfied either. I believe you could do this a way better. Take this as constructive critique.

[@allenmostafa9382]

You are just a jerk, and if you watched the video, he said you will be able to do it on the real equipment.

[@double_DD]

I watched the video, and it doesn't change the fact he is talking just too fast, not explaining anything, he is just talking. This is not good explanatory video, just plain talking...