Connecting the BetaFPV Pavo20 with the DJI Remote Controller 2 & 3 | Updated

[@vernelfpv]

BetaFPV Pavo20: s.shopee.ph/1qK69GH7TE

[@NRG1991]

Is the range with dji remote okay?

[@vernelfpv]

for the RC3, the range depends on the Goggles 3 as it acts as the bridge. most of my flights with the O3 Air unit, I haven't experienced any cutout with the VTX. but I don't push it too much possibly less than 1km as I don't want to lose the drone. with my Avata 2, I was able to fly 3.2km wih no problem in signal

[@szymonpol8919]

hello, great video. I set everything in betaflight as you showed. But when connecting dji o3 to controller 3, the diode flashes red and it does not connect to the controller. I have pavo 20 erls, controller3 and google dji 3, all updated to the latest versions. Any hint? Thanks !!

[@vernelfpv]

Have you fix this? You have to change your config in betaflight for the UART of sbus if you will use controller 3

[@TheRayll]

any update? im struggeling with the same issue?

[@ZuWenigDiggeBeats]

I've got the same problem :(

[@vernelfpv]

@@ZuWenigDiggeBeats what is your settings in the Config tab?

[@Lucatabe]

Hi, I had the same problem, I solved it by writing in the CLI: set sbus_baud_fast = on Try it!

[@ManAndTechOfficial]

Hi can you make a video how to update betaflight firmware for pavo20, from 4.4.1 to 4.5.0, if possible can we update pavo20 pro betaflight firmware 4.5.0 to pavo20.

[@vernelfpv]

This one I’m not confident on doing. Sorry. As much as possible I do not touch low level firmware updates. Got one problem with my mobula6 and moblite7 when I updated the betaflight and much of the settings was gone so i learned my lesson the hard way

[@ManAndTechOfficial]

@@vernelfpv can we update pavo20 pro stock firmware to pavo20, since it's sharing the same flight controller

[@ManAndTechOfficial]

@vernelfpv Hi I successfully updated my pavo20 with betaflight 4.5.1, working fine so far no issues.