This video should answer most of the questions people have about how an R/C Warship is built, sunk, and repaired.
Пікірлер: 136
@hepalee13 жыл бұрын
Id like too see more of this but not just makeing and know about the outer hull and the other stuff, but i would like too learn about the wiring of the motors and the reciever and the turrets that moves. it would be more help to not just me but others that are just starting in this too.
@UgariticMot14 жыл бұрын
Is there a list of all necessary items needed to build an R/C Warship as well, if possible, a very detailed general guide?
@dylandrews275711 жыл бұрын
can you do a tutorial on how to make the cannon?
@billjonesnation Жыл бұрын
Very cool. Always wanted to try this.
@67Bullshark6 жыл бұрын
GREAT IDEAS!! WELL DONE!!! CONGRATS!! ;-)))
@destinyairsofter50948 жыл бұрын
Can you do a video with more details and shows how to do it
@12ock13 жыл бұрын
i envy this type of people..... they really know how make ship and sink them..
@MorTFinE110 жыл бұрын
nice work from france
@georgerickman83846 жыл бұрын
Nice video m8 cheers
@Steam_Ships_and_Trains10 жыл бұрын
Wonderful model, can you give a beginner like my self a detailed understand on what I need to turn say 350 scale ship RC? I have no idea what I need or where to begin. How do I prevent water in coming up through the shafts? use titanic for instance. I would settle with two screws, but then how do I run the rudder? how do I get power to this ship and use what type od motors to drive the screws. As you can see I know nothing. Anything helps. thank you.
@7r47ufchfyw7twguwgu2 жыл бұрын
Hello depends what ship your talking about
@7r47ufchfyw7twguwgu2 жыл бұрын
If tripitz buy 2mm size bass tube as the
@davidtichy35467 жыл бұрын
hey man can u show in big detail how i can make the gun
@ste4lthles3 жыл бұрын
yes please
@dylandrews275711 жыл бұрын
for the co2 canister, do you keep it running? or do you have a servo to run it?
@Kakashi101sensi12 жыл бұрын
nice nice!!! An actual battle! Did it sink from being blasted or from turning over to much?
@Swampbouy14 жыл бұрын
Good Stuff !!!
@TheDaemond612 жыл бұрын
one for motor control, one for turning, and one/two for the cannons (depending on how many batteries) And enough channels for the servo's ofcourse. a 4channel set should be enough, but a 5 or 6 would be a good investment for larger ships.
@greauxmedia4495 жыл бұрын
Thank you!
@maxmorgan22977 жыл бұрын
very nice job all the way:) MaxDK.
@elyse14773 жыл бұрын
where did you get the pre made battle ship hull
@panzerducky13 жыл бұрын
what glue did you use for the ribs and did you have to cut the top rail to get it to take the curved shape
@throughthecorner12 жыл бұрын
Great idea on warship war with co2 to shoot the bb....and make hole at hull...welll this is great idea, keep posting..
@theevilgenius198814 жыл бұрын
really nice job can you send me the plans of the boat? im wanna build a ship myself but i cant find any plans thx.
@Dave1237112 жыл бұрын
Stumbuling to you guys is exactly what I need. I'm make a tank (American T-30) from 3/16 sheet metal but I don't know anything about the electronics involved. Why kind of servo di you guys recomend to shoot out bbs?
@daniko4447 Жыл бұрын
4:40 Top 10 shocking discoveries found in the ocean
@EthanFoley12 жыл бұрын
Yes. The BB's are shot out by CO2 power. If you aim right, you blow holes in the ships hull and such. And eventually water spews in. Most people equip their warships with water pumps to slow down or stop the flooding/sinking of the ship. But in the end, it usually just sinks.
@tommyleesheils20618 жыл бұрын
Does anyone know where I can get plans for a 1/128th scale USS FLETCHER class destroyer from?
@Aaroncroy25201612 жыл бұрын
How does the boat sink? Do the BB's or whatever actually breach the hull?
@cooldude543210013 жыл бұрын
what do u mean by pre made fiberglass hull and if u bought one where can i get one?
@Wazabii199812 жыл бұрын
THX for you Tutorial :P
@Cgrazi11 жыл бұрын
Make a tutorial on how to sheet the balsa onto the side
@drwangen13 жыл бұрын
where did you get the fiberglals
@Wazabii199812 жыл бұрын
i got problem what material that you use to build hull?
@BRUNK123456714 жыл бұрын
please can you post what kind of solution you use I like to adopt it for my rc sail
@MrShermantank111 жыл бұрын
how much does this cost to do cause this looks like fun
@nolifewithoutrc1014 жыл бұрын
where do u get the co2 canister?
@TheRandomMechanic12 жыл бұрын
where do you get the air cannons do you make them
@yannicklindelauf52716 жыл бұрын
you can take some airsoft guns for example for bigger scale ships for the smaller you gotta make them yourself i think
@SamTheDragon3113 жыл бұрын
Are the turrets fully functional, can you rotate them etc?
@bolshakovsergei2107 жыл бұрын
How to make these guns and how they are properly called?
@rjpalicte15 жыл бұрын
how many sheets of fiberglass you use to make the hull?
@micro222able15 жыл бұрын
where can u get the fiberglass hull
@rjpalicte15 жыл бұрын
could I ask you the list of materials needed to make the warship?
@ezema1410 жыл бұрын
me podria decir donde consiguen los planos ?
@ENVYYedit Жыл бұрын
Saw ya on instructables
@panzerducky14 жыл бұрын
would you know where i can get a set of plans for the hms repulse 1/144 scale
@uiolkijhgh3 жыл бұрын
Wow 😮 kool man
@davidbrunner44136 жыл бұрын
I'm converting my 1/200 USS Wisconsin to R/C. already have the ship completed but I need help figuring out a dual rudder system as well as a 4 engine propulsion system that allows the 2 port side screws to move forward and back togethere and the starboard screws to do the same but independently from each side. Any help is appreciated
@gregharris19666 жыл бұрын
David Brunner where are you ?
@Aulox14 жыл бұрын
GREAT!!!!!!
@NWTorpedoes2313 жыл бұрын
is the beverage at 0:57 required for the build?
@rcsupercubbuilder15 жыл бұрын
where do you get the pre-made hull?
@djericanthony10 жыл бұрын
I want to make one. Where do I go for info on the parts and components?
@Raptor-re8km9 жыл бұрын
U can get one at battlers connection im going to get one hear in a few days
@Raptor-re8km9 жыл бұрын
By get I mean order
@prestinandCo871111 жыл бұрын
Do these ship have to be created to be a certain WW2 ship or can you make as many guns as you want? (Does this ship have to be la model of a real WW2 ship)
@nolifewithoutrc1013 жыл бұрын
what kind of batteries do you use?
@kalvinchester40685 жыл бұрын
How and where does one put the batteries?
@wachin9012 жыл бұрын
how you build the cannons to shoot?
@nolifewithoutrc1014 жыл бұрын
any info on the cannons?
@drwangen13 жыл бұрын
how did you make the bow pece
@warriorsofwarmth7 жыл бұрын
Wat material is used for skinning the hull?
@pigeonfarmboy7 жыл бұрын
A thin tissue called silkspan and balsa sheeting glued together with nitrate dope typically. Thickness of balsa depends on ruleset.
@BermudaHorsfield11 жыл бұрын
how did you make the hull
@drwangen13 жыл бұрын
how did you biould the gun turrts
@captainjacksparrow88733 жыл бұрын
Tell us from where did you buy gas bottle
@apex_blue3 жыл бұрын
Could you compartmentalize it or is it against the rules?
@nolifewithoutrc1014 жыл бұрын
how do u make the oil based solution?
@sylwiagraczyk813 жыл бұрын
I think im gonna try and build the hmm hood
@thephuongduong7026 Жыл бұрын
how does the gun reload itself?
@balognaczech45805 жыл бұрын
what does it shoot?
@truongquang74704 жыл бұрын
How to make the turret?
@phmaximus7 жыл бұрын
Thats awesome, is this still happening in Australia? id love to do this but with FPV gear
@gregharris19666 жыл бұрын
Yes every month at Luddenham in Sydney . AUSBG.ORG.AU.
@Dolphin6657845 жыл бұрын
ausbg.org
@rodyman1111 жыл бұрын
How does the torrent feed work?
@JVLigon12 жыл бұрын
how do you make the guns?
@outwhee11159 ай бұрын
no pump for this ship?
@yogaalfarenofs13268 жыл бұрын
nice project, but, please more specific of the components....
@joeyheider946811 жыл бұрын
What song?
@Coinz811 жыл бұрын
where is the magazine?
@rjpalicte14 жыл бұрын
how much did it cost in the wood you used?
@TheMrThumpstar12 жыл бұрын
can you get a kit for one of these\
@TheDaemond612 жыл бұрын
the servo's dont shoot the BB's. As for a tank, I would recommend purchasing an airsoft unit (Tamiya and some other RC tank manufacturers make these) as they do not need to be waterproof, and cost esily 1/5th the price of the CO2/HPA cannons used in Big Gun Cannons.
@EstCrossings7 жыл бұрын
put a layer of steel behind the hull
@corkscrew45858 жыл бұрын
Does anyone know where I can buy one of these... I... I am not smart enough to build one...
@JackLambert18012 жыл бұрын
@barrown1990 yes it does
@Nick0utd00rs15 жыл бұрын
My son wants to know how much it costs to make an R/C warship? Thanks.
@Nick0utd00rs2 жыл бұрын
I'm the son i took over the account lol
@chilar611 жыл бұрын
why does it sink?
@Slycarlo13 жыл бұрын
i want also to make an rc ship but made out of steel plating so it will be unsinkable.. but i dont have the budget
@UgariticMot14 жыл бұрын
@hod05 I believe that it is against the rules and regs.
@oppisiteofafredfan12 жыл бұрын
@barrown1990 yes
@KirbyComicsVids12 жыл бұрын
Does DKM stand for Deutscher Kriegsmarine?
@kaisteinecke14209 жыл бұрын
Where i get the Canonns...?
@exralyg54247 жыл бұрын
www.strikemodels.com/products/
@EstCrossings7 жыл бұрын
wheres the stainless steel bulkheads
@Jarosaurusify11 жыл бұрын
Nikol Tesla!!! Briliant
@user-ho2yh9mp1u7 жыл бұрын
what is music
@ASilentS12 жыл бұрын
Forgot the bilge pump.
@jacobbradford69827 жыл бұрын
We're do I buy a hull
@THErepareman167 жыл бұрын
see above comment of coarse i could make one for you but it aint cheep
@auzziman91112 жыл бұрын
i wish bb guns were legal in australia :(
@mixperience88418 жыл бұрын
The build has so much potential, but pfdhdggrdh fart noise
@aarontrego624210 жыл бұрын
You shouldn't use balsa because after a few battles, there's nothing left to repair
@GunFunZS9 жыл бұрын
You're sure you've thought this through more than the numerous global clubs?
@schummiehugo12 жыл бұрын
voor wat drijf vermogen zou je pool noodle,s er in kunen snijden, en dat die zonk.zinkte dat geef niet. het was toch een duitser !!!.. he al met al een mooi klusje en respect. gr
@Giermistrz1211 жыл бұрын
4:56
@arielquezada97910 жыл бұрын
what about the water pump in case the hull is breached?
@linkxsc8 жыл бұрын
+Ariel Quezada many have them, but their installation depends on which clubs oyu play with. Ships of a certain size are given so many "units" to work with. Units can go to guns, ammo, or pumps (and sometimes turret rotation ability) so you have to balance the design. Hell some even include pumps for the purpose of spraying the water they're taking on into the holes above the waterline of enemies.
@Everwinternight4 жыл бұрын
Wait,you must make penetrable areas? Then I WON'T MAKE THEM
@azdomed0914 жыл бұрын
it cost for the 1000 pounds or dollers to make the r/c warship
@takashichin27279 жыл бұрын
Do the canons rotate?
@drainscholar9 жыл бұрын
Yes or else battleing would be just ram and shoot,ram and shoot,ram and shoot,ram and shoot,and you get the point!(I hope) P.S no rudeness intended!
@drainscholar8 жыл бұрын
***** lol those low tier battles in world of warships.....all those kamikaze torpedos.
@CraigDirty10 жыл бұрын
What I don't understand is why do the RC warship guys go through all this trouble for epic battles and the rc Tank guys, rc plane guys or anyone else do not?
@minecraft555710 жыл бұрын
Because the RC Planes have exspensive gadgets that cant be messed with and can easily be destroyed.Also some have turbines which can explode if damaged alot.
@loganbottomley85448 жыл бұрын
Bysteriant and there are no good companys that make good battleships, + there is more pride in building one++ they would be expensive because they are huge
@CraigDirty8 жыл бұрын
ahh I see.
@linkxsc8 жыл бұрын
+Craig Dirty .Dority Well. With planes, 1 if you made an expensive plane and it went down and crashed, there'd likely be some expensive damage. There are SOME people who are trying to make it a thing (using airsoft guns, and cameras mounted in the cockpits with a "turret" to view around for targets) Though from what I can tell they tend to have competitaions to shoot down cheap foam planes (with cheap motors and such that they don't mind so much if they crash) flown by another. And see who can take one out before running out of ammo and such. It also doesn't help that a lot of RC planes are RIDICULOUSLY maneuverable, and thus hard to aim. With regards to tanks, actually a friend and I have been plotting on how this could be done. Our method was going to be to have tanks hulled with standard thickness balsa wood (scaled in thickness to match the armor's actual thickness, so aiming at the front could result in bounces and such). And then inside make some cheap sensors for the "modules, and crew" that would be done so that if they were penetrated by a metal BB, that would close the circuit between an inner and outer layer, it sends a signal to the on board controller to say "engine knocked out" or "loader hit" and then restrict operation of the machine appropriately. No thoughts yet on simulating turret ring shots. Though we have found a guide on making cheap wood tracks, so shooting the tracks might work. Then the electronics would be mounted in a metal box to protect them inside the hull. Players would play with a camera situated coaxial to the cannon, and fight from there. Or by looking out over the field. Another problem with tanks though is the extreme difference in capabilities of the guns, so they couldn't all use the same guns like the ship guys do. But its a work in progress.