Construction Secrets You Will Regret Not Knowing

[@richardchildress9031]

I WANT A WOBBLY WALL TOO

[@FruityTech]

Join the wobbly wall club! It's the latest trend in home décor.

[@Knowbetter69]

​@@FruityTechA complete mickey mouse way of doing it.

[@francescocosentini9264]

I have done a lot of brick work ,..no mortar!!!! Water will go in , creating a city for all kinds of bug's 🐛 🐛 🐛 humidity bug's,. You get bug's,..you will get lots of spiders.

[@FruityTech]

Looks like you've unintentionally created a bug metropolis! Time to call the exterminator?

[@johnwade1095]

Yup.

[@paulbriggs3072]

Plus cold air, water, ice damage....

[@eltorocal]

As settling occurs due to weather, temperature changes, moisture and ground movement, random bricks will fracture and crack... creating and causing... You decide.

[@erictred4529]

@@FruityTech Thats their 2nd business

[@TheRoark85]

The beauty of bricks is that you can take bricks out to make openings, replace broken ones or remove to get inside the wall. This removes that ability so you may aswell just go with concrete...

[@FruityTech]

Thank you for pointing out the benefits of bricks and concrete, I appreciate your insight!

[@paulbriggs3072]

Or normal mortared bricks...

[@ijustwanttonap]

You could still do it with this. The replaced brick would just be a brick face but without ever working with this system I know I could do it. Noting a diamond blade on a concrete saw couldn't manage.

[@taunteratwill1787]

Nothing great or fantastic about adding more plastic in the environment. 😎

[@superdave8248]

Yeah, I was wondering the same. The plastic is going to become brittle over time and it looks like the design is intended to leave a small gap between the rows to add mortar. I'd give a brick wall deisgned with this maybe 15 years before it begins to lose integrity. Sure, you have minimal brick loss when you tear it down. But the cost of materials is bound to be higher in the long run than traditional brick and mortar methods. The example given is for a facade. A fake outer wall so it needs to be attached to the house. Which makes me think it isn't even intended to ever be a load bearing structure. It is pure cosmetic with limited application at best.

[@Boogiesu12]

The bigger threat is AI -nothing like debating soy induced latte loving paper straw ID10Ts

[@taunteratwill1787]

@@Boogiesu12 The bigger threat is AI? Stop watching SF movies, you'll sleep better. 😂

[@Boogiesu12]

@@taunteratwill1787 I told everyone soy was an issue with the libtards. Thanks for proving that taunt

[@quantumleaper]

@@taunteratwill1787 All I see are Luddites of the 21st Century. People who complain are just the candle stick and buggy whip makers of the late 19th century.

[@AB-ot3bc]

No mortar ? When she was putting those hallowed out bricks the whole wall was shaking. That doesn’t look stable and it seems like you have to buy a lot of other stuff to hold the bricks up. Just why.

[@jamesbarbour8400]

Exactly what I was thinking !

[@FruityTech]

Maybe the shaking was just the wall doing a little dance to celebrate its uniqueness!

[@ent1311]

Good for a facade nothing structural

[@johnwade1095]

It turns a brick wall into a cosmetic breathable skin. The plastic parts guarantee collapse in a fire and will have a life of maybe 25 years due to ozone.

[@guyteigh3375]

I thought the same - fine for a dwarf wall in a garden perhaps but a none-waterproof house wall held together by loose-fit plastic is probably as much use as it sounds.

[@mjz16]

Finally. New stuff rather than reposts of old stuff like other videos and channels

[@FruityTech]

I'm glad you appreciate the fresh content! I always strive to bring something new to the table.

[@Green-wings22]

Why on earth would you waste time on a bricklaying technique that requires another wall to hold it up? You're not exactly saving time when a standard brick wall can hold itself, therefore you wouldn't need to build the other wall first, and also without gobbo between those bricks, insulation has gone bye bye, rainwater will get inside too, causing damp issues much sooner than if you'd just built a standard brick and mortar wall. All this talk about saving time, when we should be thinking about quality and longevity.

[@quantumleaper]

The brick could be decorative instead of load-supporting. My home has a 1/2 wall of brick with weeping mortar in front that is decorative. Luddites need to get out of the way for the future to start today.

[@Green-wings22]

@quantumleaper yes, but that's not my issue, my issue is they're talking about saved time, but the thing is you need to build a separate wall just to attach this Lego block crap to, you'd save more time and the wall would be just as strong if you just built this the old school way. Decorative or no, it sucks...

[@mic2349]

Facia

[@eclecticinspiration5064]

The mortar does more than just holding a brick in place helps with water it helps with wind and it helps the insulation aspects of it so how do you get through that

[@FruityTech]

Thank you for highlighting the various benefits of mortar in brickwork. It's amazing how something seemingly simple plays such a crucial role.

[@krisknowlton5935]

Mortar does another thing, it helps to level the brick out. Brick are not made perfectly flat or square.

[@fmphotooffice5513]

What happens when the metal and plastic bits in the first story disintegrate? Everything disintegrates, though I have seen brick and mortar centuries old. Planned obsolescence on a brick wall? Sheesh!

[@gordon2945]

Thats the old way of doing things this Is the new and better way.

[@KatsatOnmyhat]

They probably cosmetic. Looks a lil flimsy

[@jacktherip7750]

As a Construction worker I must say that some of these are really game change PS until at 14:00 you realise that you are screwed

[@FruityTech]

Looks like the game changed until 14:00, then it changed again to a whole new level of "screwed"!

[@johanv4668]

you can change to a better payed profession. this robot gives you the last push to do it. also robots need software maintanance etc. ( that is part of my work ). most money every month i get from dividend not from working.

[@sharpgirlsSerious]

Brick and Mortar ! What about the plastic degrading and Falling apart !

[@grizzlygrizzle]

The robot tech and the concentration of wealth required to implement it raise the question of why societies exist. Is our purpose to render ourselves obsolete? I don't think so. But for wealthy totalitarians who want to own everything, that's their utopia. And then comes the population reduction "to save the planet." You are the carbon they want to reduce.

[@superdave8248]

No, this robot would be way too expensive to use on a construction site. Plus the high dust and debris from the site itself is going to get into this things joints. There is a reason why it is shown just putting in panels in a clean lab. As soon as you have to modify the size of your materials and add the dust and particles from the cuts, this thing is toast.

[@philebike]

The bricks look really sturdy 😮 test them out in a California earthquake

[@FruityTech]

California earthquakes, the ultimate quality test for bricks!

[@quantumleaper]

@@FruityTech Japan is also a nice place to test out the bricks. Anywhere in the Ring of Fire would work,

[@fatroberto3012]

I would literally prefer to make my house out of house brick sized size Lego Bricks. It would be ten times stronger, windproof, waterproof and look way more cool.

[@SauronsEye]

James May, of Top Gear fame made a house, with a lot of help of course, out of Lego. The complete record of the build is on KZbin. Don't know if I'd want to live in it. I expect the plastic would make the air highly toxic.

[@quantumleaper]

@@SauronsEye Do you have carpeting in your home? Carpet is usually made from synthetic fibers.

[@gabeee4332]

Bricks aren't bricks without mortar...this may be ok for a short garden wall but that's about it...I like the ole fashion brick and mortar.

[@quantumleaper]

Backfill with Foam? I haven't seen a house with brick on the interior walls.

[@xzop2688]

The home builder would love robots to build houses. Eventually nobody will have a job. Cause robots will fix robots

[@ConstructiveMinds100]

Good. I have 5 houses and will spend less money on builders in the future if I want to have more houses.

[@xzop2688]

Have to come up with new jobs or no one can pay rent. But then the new jobs will be done by robots and no one can pay rent. Yer stuck with property tax

[@FruityTech]

It's definitely a topic that sparks a lot of debate about the future of work and automation.

[@quantumleaper]

Just like Buggy whip makers have jobs today? What a Luddite you seem to be.

[@oldtimefarmboy617]

Look at how wobbly that brick wall was. That would not happen if mortar was used between the bricks and it would be more weather and moisture proof and provide more protection for the building behind it..

[@totherarf]

You can't stop a wall from cracking with those staples. If there is enough force to split blocks apart there is more than enough to rip those staples out .... even if the staples remained they would have the block ripped from around them!

[@superdave8248]

I honestly don't think this product is rated for load bearring. I think it is only intended for cosmetic applications. Like covering over aged store front properties.

[@quantumleaper]

@@superdave8248 How often do use brick for load baring walls? The last one I know of was my Great Uncle's house built in 1925 (I think) and the inside had lath and plaster walls. Most use brick as a decorative facade today.

[@adamcolon]

I'm not a construction guy... but I feel like all these things are just shortcuts for solid construction from someone with skill.

[@FruityTech]

Sometimes, shortcuts are just smart ways to get things done efficiently!

[@adamcolon]

@@FruityTech I mean, it's your video, so you have a bias in favor of these shortcuts. I'd like to hear from the community of construction workers with a variety of experiences and expertizes.

[@U2BER2012]

Next video coming soon: plastic brick wall, using super glue to assemble.

[@lgblowz2794]

How do you install the vertical rebar and horizontal wire with the brick wall?

[@FruityTech]

Thanks for asking! Installing the vertical rebar and horizontal wire is crucial for the structural integrity of the wall. I appreciate your interest in this process.

[@SauronsEye]

No 2: Column climber. The upper safety bar slips off, you fall backwards and your feet rip off around the ankles.

[@onwingsofmidnight]

Does not look watertight, will be difficult to point properly, and plastic is flammable, I wonder how this reacts to fire easier to build, but if it falls down in a fire, this seems a hazardous option apart from toxic fumes in a fire situation.

[@quantumleaper]

We build houses out of Flammable wood you realize?

[@mikedoingmikethings702]

That brick wall is as wobbly as my legs after doing leg days...

[@FruityTech]

Leg days making brick walls look sturdy in comparison!

[@erictred4529]

I thought I heard the robot say" Danger Danger Will Robinson " !

[@worldview730]

0:46, Do they have examples of newly constructed tall city buildings around the world that employ this construction method? And how long has this been tested for?

[@FruityTech]

Great questions! It's amazing how technology is advancing in the construction industry.

[@Ben-tr]

"When the walls,come tumbling down"...John Mellencamp

[@FruityTech]

Ah yes, the classic anthem for when your DIY home renovation goes horribly wrong!

[@vobchopper]

Good luck getting that column climber past the HSE😂😂

[@FruityTech]

Thanks for the advice! Navigating the HSE can certainly be a challenge.

[@titantitan3030]

Que tiempo tiene el plastico para su destruccion , no se puede construir para 20 o 30 años

[@GaryHall-y9v]

I agree, also what about the wind howling throughout this wall, mortar would stop that .

[@FruityTech]

Thank you for sharing your insights! Mortar sounds like a practical solution.

[@quantumleaper]

Foam would do the same thing.

[@saint.louverture]

I'd like to see that brick house deal with heavy rain.

[@richardchampion4826]

just what I was thinking, or freezing water, bugs getting in the joints.

[@Boogiesu12]

You add a layer of cement between them even if using the facade-click

[@quantumleaper]

@@richardchampion4826 Foam insulation between the Brick and the Wood interior walls? How many houses are built today with load-supporting brick walls? Most have decorative brick on the outside. Sounds like you want to go back to the building's interior walls with Lath and plaster again?

[@jeffwaller250]

I do not wish to nail my bricks together.

[@quantumleaper]

Are the bricks on your house there for decoration or support? I haven't seen a house that has supportive bricks since 1920, like my great uncle's house.

[@FruityTech]

Who needs nails when you have super glue, right?

[@hermanheine3291]

I am a mason, and the brick portion must be a joke! The other items look interesting.

[@FruityTech]

Thanks for pointing out the brick part, glad you found the rest interesting!

[@gary24752]

Faster does not mean better. You better have a good rain screen on the cavity wall.

[@FruityTech]

Thanks for highlighting the importance of a good rain screen on the cavity wall. It's crucial for the durability of the structure.

[@quantumleaper]

Fill with Foam? Just like what my friend did with his walls a couple of years ago.

[@killratty1670]

Most of the items in this video that contain plastic are now under question after a report coming out of York university in the UK saying they are finding micro plastic particles on archeological sites that have no reason to be there. Also I thought polystyrene was banned as a building material as it's a severe fire Hazzard

[@FruityTech]

Wow, that's crazy about the micro plastic particles! Thanks for the heads up about polystyrene too.

[@paulbriggs3072]

Micro plastic particles that sit on the ground quickly get covered with soil and sit there harmlessly.

[@SauronsEye]

Maaaateeee...look what you've made me do. You've dead set, set me off talking about polystyrene and buildings. _______________ WAFFLE PODS _______________ Look up waffle pod floor slab construction. A LOT of polystyrene is used....a LOT!. I don't like waffle pods. The land has to be near perfectly flat. The land around the house has to slop away from the slab and pipes exiting the waffle pod are almost never plugged correctly by plumbers, all leading to issues with water getting under the slab and causing it to uplift. Waffle pods require a lot more site preparation compared to a full concrete slab and the upkeep of the land around the house needs to be constantly maintained to stop water getting under the waffle pods. Also, not enough weight is in the slab when a big storm comes through to keep you house planted to the ground and so the house gets lifted, maybe not so much that you notice it in real time but you'll notice it when you find cracks in your walls. Also, site remediation when the building is demolished. All of that polystyrene has to go somewhere. Too many issues with them to be viable in my opinion but they are used extensively around Australia and the problem is, that people who construct new homes are not experts and so allow the builders to dictate how the construction will be done. _________________________________________ BUILDING CONSTRUCTION INSPECTORS. _________________________________________ Consumers fall into the trap of believing the Builder is an expert and has their best interests at hand but the Builder's focus is their profit motive and if that profit is being impacted by good building practices. Obviously, the profit motive wins because without it, they're a broke Builder. So the construction is done at the Builder's convenience, to maximise their profit, not give you a product that matches the price you have paid for it. Part of this profit motive and lack of proper oversight by independent Inspectors leads to neglectful work practices because If you walk onto any building site in Australia, you are almost certain to find a first or second year Apprentice doing unsupervised work that is mandated to be carried out by a Tradesperson or directly supervised by a Tradesperson. IE: The Tradesperson has to be physically present and watching and instructing while the job is being done. Not wandering off to have a crap in the site's port-a-loo for 30 minutes, as they scroll through their phone and then come back to check the work. It's a joke. (Which reminds me...if you can, go and find the movie called, "Kenny". it's a bloke who installs port a loos and cleans out septic tanks for a job....One of the best lines in the movie as he sticks his head out of a sewerage tank, "Oh, the smell in there will out live religion". Not the greatest movie but worth a few laughs) If you want to see first hand the absolute crap building work that is going in Australia right now, go and look at the channel called, "Site inspections". This very low quality of work has been allowed to propagate through out Australia because Builders have been allowed to influence owners to select the Inspector of the Builder's choice and the drama if the owner doesn't use the Builder's recommended Inspector. The Builder will try and dictate to the Inspector when they can and can't come on site. That the Inspector can't take video or photos. They need to have someone with them at all times. Anything to distract and make that Inspector's job difficult. Where as before, all housing inspectors were employed by the Government and the builder or owner never had a say who was coming out to do the inspection. This means the inspectors were never beholden to anyone for their income and so were highly independent and generally insisted on quality work throughout. That's not to say that there weren't a few bad Inspectors being intimidated and/or taking bribes to let faults be overlooked but because of the random nature of Inspector assignment at different stages of the build, the old faults were usually picked up and this led to investigations as to why the fault was not noted at an earlier phase of the building phase. This weeded out a lot of dodgy Inspectors very quickly or if it was a genuine oversight through a gap in knowledge, additional training provided to fill that gap, making for a more knowledgeable and supported Inspector. Thankfully, due to the avalanche of complaints, the Government has made changes to inspection protocols and this will hopefully force builders to always build to the relevant Australian standards. I don't think the changes go far enough. They're just patching up a very leaky system that has been created by the Government outsource building inspections. What should happen is all the Inspectors should return to being employees of the Government. Then as before, the Inspector is assigned jobs on a first come first served basis...the taxi rank protocol and there's zero tolerance for job refusal or job swapping. Refusal or job swapping = instant, mandatory dismissal and out of the office in 10 minutes or less or the Police are called to arrest you for trespass. The dismissed Inspector can plead their case at the Fair Work Ombudsman for unfair dismissal if they have a genuine and compelling reason for the job refusal or job swapping. That approach will clean up the industry beautifully.

[@SauronsEye]

@@paulbriggs3072 No, microplastics do not sit on the ground and get quickly covered by soil and sit there harmlessly. Microplastics are everywhere. In your food, in your water. Oh, you drink bottled water only...guess where the vast majority of that water is coming from...not out of some untouched spring high in some remote mountain but more likely the same water plant that your tap water comes from and research has shown that the filters at water plants are not always able to filter out microplastics and the same stands for any filters you have installed at home. In Australia, where I'm from. There's more stringent requirements on tap water than bottled water. So the idea that you're getting cleaner water from store bought is clearly marketing bullshit. Fucking criminal lies, actually. So you may want to consider editing your comment.

[@steveolson69]

And if we get rid of oil you got no plastics anyway ! I guess we can use sand and build out of glass!

[@worldview730]

4:17, how can any humans love a robot that steals their jobs from them, no matter how efficient they are?

[@FruityTech]

Maybe we can teach the robots to do stand-up comedy instead of taking our jobs!

[@quantumleaper]

Luddites need to change, just like Buggy whip makers in the past.

[@graemehooper]

Oh yes just replace nature until there is no more!

[@markdurant943]

So if the "robots" are going to get all the work, what are the humans going to do? Or maybe you cannot see.

[@FruityTech]

Maybe we'll all become professional robot babysitters! 🤖👶

[@markdurant943]

@@FruityTech Maybe robots/AI should start making KZbin videos.

[@joestein1144]

bugs will never find there way between those cracks...

[@FruityTech]

Thanks for pointing that out! It's great when you notice those little details.

[@quantumleaper]

Foam between the Brick and the wood on the inside? My friend just insulted his wall with foam about 5 years ago, they forgot to sand off the plugs on the wall outside.

[@BLUEHORIZON-g2b]

Facadeclick is A STUPID BEYOND BELIEF !!! How on earth could THIS system keep out damp, the rain ???

[@FruityTech]

Maybe Facadeclick needs an umbrella and raincoat to keep out the damp and rain!

[@Matlockization]

By putting solar panels on the roof, you can enjoy electricity only when the sun shows up !

[@quantumleaper]

@@Matlockization Try batteries Luddite when it's night or the grid. Solar only lowers your bill doesn't get rid of it.

[@Matlockization]

@@quantumleaper A fool will buy batteries, then after 7 yrs they get worse every year thereafter. Why do you think the resale value of EV car is so bad after 3 yrs ?

[@quantumleaper]

@@Matlockization Resale value drops the second you drive off the sales lot. What happens when we run out of GAS around 2050? Are you going to start using a Bike or walk everywhere?

[@DyslexicLunatic]

Most likely a lot more expensive. Homeowner cost for the fancy crap will likely be more than the cost of hiring a reliable/professional contractor who will to a much better job.

[@FruityTech]

That's a valid point to consider when looking at renovation options.

[@quantumleaper]

Prices do go down over time for new methods you realize. If you can build a house in 1/2 the time, it may not be as expensive. We a 3D-printed houses now.

[@kevinrtres]

Mmmmhhh, so how about having some mortar to stick the bricks together to seal out the elements????

[@FruityTech]

Mortar - the unsung hero of the construction world, keeping bricks together and elements out!

[@onwingsofmidnight]

Tying the structure with conductive metal into plastic that holds the bricks together is just a disaster in a fire this will allow the outer brick structure to collapse when heated or am I missing something in the concept.???

[@quantumleaper]

Just like wood after all it burns too. Most carpeting is some form of plastic too.

[@onwingsofmidnight]

@@quantumleaper Yes but the walls dont fall down generally the timber frame will burn but the walls generally dont collapse that is a significant hazard in any one wanting to put a fire out.

[@democrasywins]

lol insane

[@FruityTech]

Thanks for watching!

[@jasonlandless3332]

I’m a bricklayer and that invention is not needed 🤨

[@FruityTech]

I appreciate your perspective as a bricklayer.

[@quantumleaper]

The same thing could be said about buggy whip makers said the same thing after the Automotive was begin made also. Luddites say it when better tech comes along.

[@gerrycarroll2112]

WE USED TO CALL IT LEGO

[@FruityTech]

Thank you for reminiscing with me about the good old days of LEGO!

[@danielleriley2796]

Brick wall. That wobbly thing? That ISN’T WATERPROOF. How is it fixed to the slab? Where do you find those special bricks?

[@FruityTech]

Thanks for pointing out the concern! Proper fixing is crucial for the longevity of the wall.

[@quantumleaper]

Even been in a HIGH building that sways? Or when wobbly buildings protect you from an earthquake. BTW the Willis Tower sways up to 3 feet.

[@CTimmerman]

Won't that plastic get brittle over time?

[@Weout77]

NO MORTAR?!?!?!!!! your a fool if you think this will have any structural integrity.

[@NTSRFR4]

I think peel and stick mortar would work better probably😂

[@FruityTech]

Peel and stick mortar, the future of masonry! Thanks for the creative idea.

[@francescocosentini9264]

Robot carpenters lol ,. All your lumber has to be perfect ,.. please

[@FruityTech]

Robot carpenters: the future of flawless woodworking!

[@francescocosentini9264]

@@FruityTech how very selective the wood will have to be? Have you ever been to a lumber yard ? And what size homes can you build with this robot ,. Chicken coop size lol . Transport ??

[@quantumleaper]

Just program the robot better, I know for a non-programmer that's something they wouldn't think of.

[@margaretgomer8782]

Looks like you could just push the wall over

[@FruityTech]

Thanks for your observation! It's always interesting to see what viewers notice.

[@CityTelek]

Really, everything is 'eco-friendly" 🤣

[@splowski]

whats with all the metal clamps sticking out from the slate? It looks really disgusting. I was watching a slate cladding videos yesterday and (almost) all nails were hidden.

[@u.s.e.r.]

Эта кирпичная кладка - дерьмо, без вариантов)

[@keithparlour2686]

Can't beat good old sand and cement for building,I wonder who will be responsible when them wobbly walls collapse

[@FruityTech]

It's always important to ensure the construction materials are of high quality to avoid any issues down the line.

[@BruceMega]

sorry i would not use anythnig made of plastic for a wall it breaks down and breaks dries out to dangerous

[@noch_92]

а я всё думал как американские киношники снимают что от одного чиха или пука (fart) стены разлетаются?😂

[@quantumleaper]

Still better than most Soviet-built buildings. I do wonder how well they build them now?

[@andrewjackson244]

"construction is on a permanent rise" - No, it's sadly not permanent.

[@quantumleaper]

No construction is permanent without Maintenance. Why do we paint the outside of our houses and bridges?

[@erichendrick3928]

What could go wrong ?

[@FruityTech]

Well, if everything went right, where would the fun be?

[@theyuha]

can arojel based plaster be outside?

[@quantumleaper]

We have used it on the Space Shuttle. Aerogel insulation can be applied to the external surface of external walls, either with a render or cladding system. Google can be your friend if you use it.

[@GiC7]

Thanks

[@josephdocherty5977]

I’m a brickie and ,that wall looks like a bigger Lego block so please give us a break ,and show something more realistic tc all joe Scotland ,.:::

[@FruityTech]

Thanks for your feedback, Joe! I appreciate your perspective.

[@quantumleaper]

Have you ever played with Legos? They can be a pain to take apart.

[@nigelbrazier835]

I think cote cloture was one of the better more honest & realistic options . At $17 per panel I would definitely look at this product. The other products in this vid seem a bit plastic n frail. Give me mortar ,steel, concrete n timber any day . Old school lasts n looks better.

[@FruityTech]

Old school materials for a classic look - you've got a good eye for quality!

[@quantumleaper]

So you like to transport your work materials with a horse and wagon?

[@xxHydroponicxx]

No mortar?! I’m not a masonry expert or bricky but this screams stupid!

[@FruityTech]

Who needs mortar when you can just hope for the best, right?

[@brosmile9388]

Bugs, Bees, Wasps, Hornets, Ants, Spiders, Roaches.... The whole neighborhood will become infested from this breeding ground. Wobble...Wobble.

[@FruityTech]

Sounds like a scene from a horror movie! Time to call in the bug busters.

[@quantumleaper]

Wood is a great home for ants, an overhang of house Bees/Wasps just LOVE that area. I still remember when I took the trash out at my old job and there was a wasp nest next to the garage containers they had a nice fence around and that was where the wasps were located, 5 stings just to get back inside.

[@jeromebishsr.1394]

What happens when water gets in the cracks.

[@FruityTech]

It turns into a mini swimming pool for ants! 🐜💦

[@arianabel5510]

Muito bom 👋👋👋👋

[@FruityTech]

Thank you so much!

[@walterlebzax9585]

What's wrong with mortar?

[@BornFreeFilms]

For sure!!!

[@mikebest4079]

Seams to me like it was invented by a lazy person that was trying to make something better that ended up making things way worse and will probably end up getting someone hurt. People just need to stop making things nobody asked for or wanted. If a master mason wanted something like this they would design it themselves not someone that clearly knows nothing of structural rigidity.

[@FruityTech]

I appreciate your perspective on this invention.

[@RodgerDodger196]

WELL I THINK THAT ROBOT/MANDROID WOULD BE REALLY HELPFUL PUTTING UP SHEET ROCK & as a helper(if that wasn’t this video🤔I’ve watched a lot today😂//I WOULD REALLY REALLY LIKE TO HAVE THAT MINI DUMPTRUCK LOADER‼️‼️👍👍COULD REALLY BE A BACK SAVER/LAWN SAVER/HUUUUUUUGE BENEFIIT FOR YARD WORK IN TIGHT SPACES….(I don’t have 40K, so I hope it’s WAY MORE AFFORDABLE than something similar I saw a worker using.

[@FruityTech]

Maybe we can start a crowdfunding campaign to get that mini dump truck loader for your yard work!

[@rockymini625]

Wait a second let me hold my breath for 20 minutes. OK this can’t be real. What’s holding it up what happens if the wind blows one day or better yet by chance it starts raining. Don’t you think the masonry industry has taken enough hits specially from the EPA.

[@FruityTech]

Thank you for sharing your thoughts! It’s always great to see viewers engaging critically with the content. The masonry industry is certainly facing its challenges, and discussions like this are important.

[@user-http55588]

😂😂😂😂 Yeah all right

[@theyuha]

Nice inventions but they want so much for them that only wealthy can afford them- for the rest of us it is cheaper to use older methods. Perhaps lower prices will come with adoption.

[@FruityTech]

Who needs those fancy inventions anyway? Old-school methods never fail, plus they come with a side of nostalgia!

[@quantumleaper]

Just like Cars in the early 1900s too at least until Ford paid the workers enough to buy them. Just remember 3D printers in the 1990s were $50000+ now you get them for as low as $200.

[@ijustwanttonap]

An average bricklayer canblay brick faster than that.

[@FruityTech]

Thanks for the feedback! It's always great to hear from experts in the field. Your perspective is really appreciated!

[@ijustwanttonap]

@@FruityTech Where you gain time and money is on the labor end. The most time consuming aspect of masonry labor is probably in providing cement to the masons. They have to make it, move it to the work area, pit it on boards or tubs and often add a bit of water and mix it as it dries up. Tooling the joints is also time consuming. Clean up is also probably much easier.

[@bradhoward2887]

as a brick nason for 40 yrs i have to laugh at this lol how are you to get mortar all the way thru the bottom and top and the head joints weak walls

[@FruityTech]

I appreciate your insight from your 40 years of experience in the field!

[@JONSEY101]

So you want a place built with wobbly walls, poor insulation, and using yet more plastic? If so the buy this product. Gaps between the bricks like that are terrible ideas, not to mention the bugs that can walk in and out with ease, and I know how much some of you love spiders. Trying to cut corners and save money isn't always good in the long run. This is lazy building.

[@quantumleaper]

So you don't like TALL buildings that wobbly up to 3 feet like Willis Tower. Backfill it with foam to keep out the creepy crawlers. My 1949 house gets bugs all the time in the summer. At least I don't get lizards like my friend down in Florida.

[@HTHAMMACK1]

No, I can't see that working out well.

[@FruityTech]

It's okay to have doubts, but sometimes things surprise us in the best way.

[@JaKorsarz]

wobbly brick wall? no thanks.

[@FruityTech]

Who needs a wobbly brick wall when you can have a sturdy one, right?

[@galleria100fuegocuidadsate4]

PLEASE DO NOT WASTE YOU TIME UPLOADING DAFT BRICK WALLS LOL

[@FruityTech]

Thank you for sharing your opinion.

[@quantumleaper]

Insulate the walls just like we do with walls today.

[@edwardross4767]

Wheres the construction secrets?

[@miguelcruz8597]

My grandma's was not good for plastic so very kefod

[@ga4816]

And why would I regret not knowing this stupid idea???

[@HGANGHONY]

The masonry system is Junk!

[@JoeHTX]

That facade click is junk. Spray it with water and the water will go right through it between the cracks. Look at it wobble around when a new brick is added and when they were hammering the final plastic spikes in LOL what a JOKE!

[@FruityTech]

Thanks for sharing your thoughts on the facade click! It's always interesting to hear different perspectives.

[@David-is8wz]

😊😊😊

[@jimosullivan1389]

See the stack wobbling as he builds the wall ? It what we Engineers call SHITE !

[@FruityTech]

Thanks for pointing that out! Building stability is crucial in engineering.

[@quantumleaper]

Tall building like Willis Tower wobbly up to 3 feet. Also building in Earthquake zones does it too.

[@bobfoster687]

Plastic? Melt in a fire?

[@quantumleaper]

Wood burns also. That's why we have firemen. Last summer my neighbor's house burned and had to rebuild the second floor. It was brick on the outside but had wood walls on the inside.

[@alanwood4968]

If its single brick not tied in to the other wall first big puff of wind and all fall down. Do you know the story of three little pigs and the nasty wolf who could huff and puff and blow your house down. Well a silly architect tried building a single brick wall with a timber inner wall off a school building looky the wind warnings where out and the kids where at home when the whole wall was blown down. OUR old castles and houses have stood the test of time which is better than any architect. So don't scrub what your forefathers did to save a few pennies.

[@FruityTech]

Thank you for sharing that story and the lesson it teaches. It's always good to remember the wisdom of our ancestors when it comes to construction.

[@quantumleaper]

@@FruityTech How much mortar did they use in the pyramids of Egypt?

[@lukedennis-y1s]

All the way to the ground

[@robertblahnik7685]

20 Xs the cost of motar.

[@quantumleaper]

Today what about Tomorrow?

[@FrancisoDoncona]

Designed to fail, plastic crap, wonder how your insurance company feels about it.

[@quantumleaper]

Plastics will last 50 to 500 years you realize. Also, insects can't eat it, like wood.

[@craigchilman3649]

So it’s no longer waterproof and it will double the cost, and bugs will get in through the … This is an absolute fail. 💩

[@FruityTech]

Who knew bugs were the new target market for our product!

[@graemehooper]

non of these resolve the underlying problems!!

[@FruityTech]

I appreciate your feedback. Let me know what specific issues you are facing so I can try to help.

[@quantumleaper]

@@FruityTech I love it when people say that and then run away.

[@mysightofthings]

You want to build a house faster, why? And why all the plastic?..oh yeah..bolt those poles in, surely no one will come along and unbolt them and steal them. Lame ideas

[@FruityTech]

Thanks for sharing your thoughts!

[@ritchieschrein]

no mortar no strength

[@FruityTech]

Who needs mortar when you have creativity and passion, right?

[@quantumleaper]

backfill with foam?

[@brigettegonzalez2632]

16:54 / Breathing 2 stroke fumes all day long can't be healthy.

[@quantumleaper]

Living in LA in the 1970s wasn't heather either. Or how about Beijing today?

[@thomasmoran179]

The craft has been raped and pillaged, it’s a shame .this is a sad sad thing to see

[@FruityTech]

Maybe we need to start a craft revolution to reclaim what's been lost!

[@GovanDave82]

I’m not a bricklayer and I know that this is shite

[@brandonlee4013]

MIX THE MUD - C'mon !!

[@FruityTech]

Your enthusiasm is contagious! I appreciate your encouragement.

[@YuriV-d8h]

eh....15:30 is the dumbest thing I've ever seen, its like using postage stamps as stitches on a very serious open wound.

[@FruityTech]

Thank you for sharing your thoughts!

[@mh24728234]

🤣🤣🤣

[@gurglejug627]

Design life 4 years?