Manual transmission overview in under one minute - Part 1

[@tdlaustralia7791]

Great set ups for demonstrations. Nothing better than actually seeing how things work. Cutaways and models are the best for teaching.

[@amandayates3905]

Love the little hydraulic clutch set up with reservoir and all ❤😂

[@osmacar5331]

It's needed...

[@jacobpoucher]

Surprised they haven't changed the name of those parts yet to be politically correct. And no it's not needed. There are tons of nonhydralic clutches, do better.

[@analogueoverdigital929]

​@@jacobpoucherfor this setup, it's needed😂.

[@analogueoverdigital929]

​@@jacobpoucherbut in this particular video it is a hydraulic clutch, so tell me, would it work without the line and fluid?? No it wouldn't. Do better

[@h1tnrun339]

Great way to explain it. Much appreciated ❤

[@darrentylor5473]

Its also a great visial for someone who has driven standard for years and needs to understand how the parts work together... Especially since my engine and transmission are not normally paired together from the factory... That is to say I have an Isuzu engine and a Jeep transmission... Figure out which pieces of what clutch assembly I need...

[@agabaderick]

Fallen in love with it

[@cosmictreason2242]

Still didn't get it. Needs to be broken down in more detail. Like what's 2nd gear? I have no idea after watching this

[@Godislove902]

remains complicated but I continue to study it

[@grazianolaudisio3644]

Excellent 👍🏻

[@ShawnStafford-1978]

I understand the process. There's more to it also.

[@ShawnStafford-1978]

@STAYTUNED69 obviously retread

[@TawfiqSnipper]

Please does the clutch disc stop rotating whilst the clutch pedal is being held down

[@mahinaik2563]

So applying clutch first during braking is best!!?

[@MP-po6fj]

Love it

[@bodrumtarik]

What could be the problem if it dont want to go in gears 1,2, and reverse when ure engine gets warm? (After 10 minutes). But shifting is not a problem with the engine off.. what could be the problem maybe any idea?

[@elijah2345]

A "how to hold up pants correctly with belt" video is needed next

[@analogueoverdigital929]

I used to wear my belt like this because I CCW IWB. Once I got a proper belt I didn't need to anymore. Idk why it's on like that but it looks funny. Maybe that's the only comfortable way..

[@محمدالغلبان-ه6ه]

ممتاز

[@farhanzafar6129]

Great explanation. Thank you.

[@AliouBalde-k9g]

Nice

[@GearHead75]

Guys I understand that clutch is being disengaged but how is it disengaged if it pushed in direction of flywheel? Can someone explain please?

[@GearHead75]

Or is it pressure plate that keeps them two connected? I thought pressure plate is responsible for disengaging clutch

[@adrianlovic6486]

It's a clamp reversed. The clutch is clamped up hard against the flywheel with big powerful spring. When U press clutch U release the clamp.

[@GearHead75]

​​@@adrianlovic6486 Thank you for explaining man, I thought i would get reponse in like several months lmao I understood everything now, I will try to look for a video that explains it graphically, thank u man, have A good day :) Edit: Typo :v

[@osmacar5331]

Not all are like that. Iirc i think most are separated. But i could be wrong.

[@justinscott6516]

Awesome "

[@RobertSmith-xr5fj]

Show us what would happen if you put the clutch disc in backwards

[@misbahsuv2181]

Hatur nuhun akang 😊

[@ezralabth]

No pun intended but this explanation is clutch

[@nicketosaunders7653]

"Pun" fully intended and appreciated....😆😅🤣😂

[@Vyantri]

How does the pressure plate disconnect from the flywheel if it is bolted to the flywheel?

[@DeteCT0R]

Both pressure plate and flywheel bolted together and they never disconnect from each other. When u press the clutch pedal the actually clutch disk which is disconnect from the flywheel because the pressure plate.

[@Nicholas247066]

As the guy above stated, the pressure plate and flywheel are spinning together at all times. The clutch disc is sandwiched between the flywheel and pressure plate, and is connected to the transmission via the input shaft. When you press the clutch pedal, the release bearing will release the spring pressure and allow the clutch disc to freewheel in between the flywheel and pressure plate.

[@4G12]

A dry clutch is basically a dry friction brake.

[@coffee_uk]

Just send them to the uk for 2 weeks😂

[@abdulwakil2613]

XDDD

[@Jester2030]

Thank u!

[@AjmalMian-l2f]

❤

[@joesmith1926]

Camera man having a ‘mare there

[@toxicity6629]

Buddy forgot the clutch cable mine just got sent to heaven two days ago

[@adrianlovic6486]

HATE clutch cable.

[@numailer]

More like a "operation of the clutch in under one minute".

[@chinedusuccessAutomotorparts]

I will like to work with you

[@Consulab]

send your resume to [e-mail]!

[@PetFamily18]

Sir, I am from India. Can I eligible to work with you ?

[@PetFamily18]

Am good at creo software CAD

[@dham5558]

It's better if it's long. Not just a second

[@ExileNoodle]

Anyone else make a, hm sound after watching the video?😂😂

[@TripleTapHK]

That's a clutch.

[@ruthenican]

Dear God, I think you're on to something there.

[@welln0w]

@@ruthenicanbrutal 😹😹

[@N3k0-Arc]

Thought it was the blinker fluid pump for a sec... Thanks man

[@vermili0n]

@@ruthenicanwell isn’t the video how a “transmission” works? Not a “clutch”

[@TripleTapHK]

@@vermili0n Congrats, you are smarter than the other commenters.

[@dineshkumaryadav7561]

I,m interested please provide

[@josha618]

oooo pressure plate dats from minecraft

[@dmnddy]

ohh

[@josezarate246]

USE THE MIDDLE FINGER TO YOURSELF 😮

[@LontumpamelaKininla-gx8pt]

❤❤😅😅😮

[@eileenkung1654]

👍

[@AlexPtc89]

This really needed to be explained?🤦🏻‍♂️🤦🏻‍♂️🤦🏻‍♂️🤦🏻‍♂️

[@jasong6027]

Wrong title that's a clutch

[@robertpaulson6697]

What’s with those shady finger tatts?

[@kingghidorah8106]

if he's low key showing a leviathan cross he's probably a satanist. Not dangerous. If these are nazi symbols... that'd be an issue.

[@boukrainehabib6596]

❤