Convert .SVG File Into 3D | Blender EASY Tutorial

[@pamhampton2588]

If you do use the mesh conversion, you can then go to menu MESH>CLEANUP>LIMITED DISSOLVE. This will give you a very clean mesh with just the vertices on the outlines.

[@EllieLovesYoux]

absolute hero

[@billyjohnson5568]

Awesome tip!! TY

[@bruceaisher]

Amazing tip - thank you. Also to note, I had to do it a few times to get a super clean result on my SVG

[@lvlrSmooth]

Noob here. After converting to mesh, where is this mesh menu?

[@pamhampton2588]

You need to be in EDIT MODE to see the MESH MEN, Then roll a l l l l l l the way down to CLEAN UP

[@kamelkadri2843]

Just thanks man been looking for this simple tutorial all day, everyone makes a quick tutorial no explanation just annoying music, shortcut after shortcut without showing how, over complicating things, Just thanks man

[@magenta1797]

if you want to center things more precisely you can do right click > snap > selection to cursor.. if your cursor isn't centered you can select the cursor from the right menu and press shift + c !

[@agusdorantes6688]

Thank you very much friend, I was just looking for the video to solve the problem of errors with the modifier, the extruding thing saved my life.

[@ShebanFPV]

Cool tutorial, thanks! But how can you apply mesh to object and make it solid?

[@endorphinzz]

Unfortuately, this video isn't helping me much...at 2:54 I don't have half the icons on the right side panel that are shown here, and the wrench icon selected to bring up the "Modifier" window is nowhere to be found, so that's as far as I got lol. I had to play the video at .25 speed just to see what was being clicked to bring that window up.

[@deniserogers3227]

Actually if you select the whole item and right click and join it all together, then the icons on the right will appear and you can follow along with the video perfectly. :)

[@Imstuckinthevoidlol]

GREAT VID!

[@hamzahshuaib4528]

This is awesome

[@streamingvideo6654]

Awesome technique. Thanks!

[@naneocosplay]

omg didnt know we can upload svg files! you re a life saver! I will use this to upload my sewing pattern files, apply fabric to them, and them upload them in clo 3D thank you for the tutorial!!

[@mahboubmallah]

amazing tutorial thank you for the information

[@FlyingNamikaze]

Amazing Video. Thanks !

[@BellArtt]

Thanks! this was so helpful

[@mitchellanderson3068]

Hi thanks for the video. One question though. When I went to remove the material on the svg I wasn’t able to remove all of it at once by selecting the whole thing like you did. It was a logo and instead I had to go in and individually remove the material off of each letter in the logo. Any idea why this might be? Thanks again

[@hips_ttv]

everything you need about svg files! perfect video, tks

[@RubenGarciaMarrufo]

well did exaclty the same thing you did and... well theres no convert to mesh.

[@christophergs]

Maybe you were in the wrong mode? Certain options are only available in certain modes. If you are in "edit mode" you will not have an option for convert to mesh. You can press tab (or click the mode drop down at the top right) to change to "Object mode", and convert to mesh will appear in your options

[@cgcracks]

Wow I love this tutorial 🤩

[@xyzxyz324]

Thank you! One question and suggestion, why acting so fast while selecting commands and menus, it is clear that it is a simple tutorial for amateur people.. I had to slow the video down to follow

[@tiatangs]

Amazing and simple thank you!

[@simpsonelli]

Awesome, thank you!

[@alexbromfield4162]

Fyi, if you find that independent curves keep getting selected. Select all and Cmd+J to join all curves. Then solidify. Just had to research why one curve at a time was only getting selected.

[@kzvvw]

OMFG i recognize your voice!~ Awesome bro!

[@НемањаСтојадиновић]

Thanks, very good explanation 😀

[@jirkadolezal8127]

thank you

[@YuYuYudotpsd]

thanks bro

[@AJDraws]

Hi there. My svg just keeps extruding the outlines only and not the fill. So just the edges of the drawing. Is there a way to fix this?

[@bilbobagend8155]

Late, but did you actually select 'Scalable Vector Graphics' and not 'SVG as Grease Pencil'?

[@ShyamBute]

very helpful, thanks for sharing

[@nochistlanmx4350]

Thanks for the tutorial.

[@idk-qf9lw]

instructions unclear: its still a SVG

[@artur_ku]

awsome dude

[@barbiewein]

MANY THANKS!!!!!

[@yahyakhan9448]

When I import my SVG it become collection 😢

[@RiotRBLX]

HOLY CRAP!

[@NicholasArena-p6c]

BASED TUT

[@Gtmz53fxt56zxc]

I didn't get that solidify parameter thickness is the theoretical "extrude" analogue for image, thank you, the vide is very helpfull

[@nonamech14]

Great method but the topology will crazy mas

[@mudasarali8148]

First comment from Pakistan

[@xxTHExxABYSSxx]

It never lets me choose to turn it into a mesh, its already a mesh. every time i try to extrude, only tiny bits and edged extrude. the actual picture doesnt extrude. it always looks horrid

[@llrainll]

I Dunno why when I extrude- even at 0.1, it goes overboard 😢 ! Anyone know why that is? 💀 Amazing tutorial ! I tried both options. OH-! I got it! HIT SHIFT WHILE YOU ARE EXTRUDING !

[@ShamekaCheek78]

Type 0.001.

[@hunimoonz]

why wont my material show up after i extude and bevel

[@ZeroTorySeats]

The tutorial start at 1.14

[@DenizBazan]

great

[@lumpydabest4256]

I need help. For some odd reason mines imports but doesn't show. Can you help me

[@Ken.Dias9]

could be size try zooming in

[@lumpydabest4256]

@@Ken.Dias9 ok, will try that, thank you

[@RegaliaMetalDecor]

Nice, it would be helpful to do a part though where you apply a material and export :)

[@russaha3031]

If you do use the mesh conversion, you can then go to menu MESH>CLEANUP>LIMITED DISSOLVE. This will give you a very clean mesh with just the vertices on the outlines.

[@thisfleetingfeeling]

you saved me bro

[@azzacalabaza]

its not working

[@alipiojr1]

valeu!

[@JeffreyGonzalez-w5o]

086 Cole Keys

[@kattxxart2312]

2:43 PRESS WHAT?

[@dungeonsanddioramas8068]

F3

[@ReporteroToronja]

No se entiende nada

[@TheZenEagle]

literally none of these methods worked...

[@DonaldMartinez-p4v]

Jast Viaduct

[@malinkowge]

okay but can you go slower? lol

[@markkusiipola]

Not good for a beginner. You talk so fast it's almost impossible to follow.

[@Imstuckinthevoidlol]

GREAT VID!