Converting old junk to EFI with Microsquirt

[@rambleon2838]

This site found me when looking for Rover V8 tappet noise issues. Must have been the Lotus/Caterham reverence. Great skill level and video product to the point without the drama. This channel deserves more views. Liked and subscribed!

[@ozarkgarage]

Many thanks!

[@erniesautowerks4803]

You take DIY to the next level…👍👍

[@barntech2291]

Just came across your channel. Anxious to see what other videos you’ve got :-)

[@appleapple3855]

Seems like a very reasonable thing to do with jbweld. Looks good!

[@MrRanggong]

Dude you have some skills. Nice job! You make me miss my 20R on my 1976 Celica. Never should have sold that car. Replaced it with a 1989 Supra but still.....

[@cheaptick]

did the JB weld trick for pits at thermostat housing mounting years ago. Bead blasted for prep. Worked great

[@Trackertreat]

At last, someone who surfaces their cylinder heads the same way as I do. I also used JB Weld the same. Kerosene is good as a lubricant for the wet and dry paper. I have a supercharged Fiat 850 Sport Coupe running a Microsquirt. I would suggest a supercharger instead of turbocharging for your style of events. The supercharger will give boost just off idle.

[@peted7387]

really sick dude ! please go into depth with the wiring !

[@ozarkgarage]

Thanks for the suggestion, I am working on part 2 and wiring is definitely a big chunk of the content.

[@electroshreve5278]

Great info learned alot

[@ozarkgarage]

Glad to hear!

[@5.43v]

Good work

[@speedbuggy16v]

I was going to ask why not DCOE style throttle bodies and intake, but thats $800, great work, I will be following!

[@ozarkgarage]

I looked at DCOE style TBs (they look super cool), but you are right, they are expensive and they don't have a TPS built-in, so you have to use an external one. Also, ITBs are more difficult to add boost to.

[@josehumbertohernandezcorte3617]

Hola desde colombia,estoy en un proyecto similar ,ayuda con la instalación del cableado y los sensores gracias

[@ozarkgarage]

Instalación del cableado y los sensores: kzbin.info/www/bejne/mKqcc4KLq7Non6c

[@jeyseychelles1370]

The float level dose not dictate mixure

[@ozarkgarage]

If the fuel is higher in the float bowl, it is higher in the emulsion tube. If it is higher in the emulsion tube, more fuel will pull through the venturi making the mixture richer. The opposite is also true.

[@oldschool1993]

Sheeesh- why don't you pressure wash the thing before working on it.

[@ozarkgarage]

It's cold outside!