Cooler Master Qube 500 Build - Step by Step Guide & Review | Intel 14900K Build

[@masmur]

this is the best video explaining the qube 500. not like those lazy reviewers who dont understand the use of the side bracket and nag about the airflow.... well dong

[@colinhannah2210]

I did an inverse, basically upside down build with the glass panel and components visible on the opposite side of this case. Being able to do this kind of thing is a big advantage of this case.

[@garyedwards1386]

Hi Christopher, love your builds. Can I ask you to think about telling viewers how much you builds are please. This will help future builders look at builds they can afford.

[@WideAppeal]

This is such a helpful video. Thank you. It eased my first ever PC build in the Qube 500. I installed a 4070TI which doesn't stretch out under the PSU so had room to build in a fan at the front. Thanks again for what you do.

[@Glisern]

Thank you for the video where you did a build in a Meshify 2 Compact. It convinced me to get it as the second one I've built in my life. Went from a 2500K, yea, to 14600K.

[@eddyhaze8239]

Cooler Master Qube 500 , this would make a good test bench

[@yellowfuntvix1459]

It's the best Guide & Review on youtube. I'm going yo buy it for my EATX Motherboard: 12.0-in x 10.5-in, 30.5 cm x 26.7 cm

[@RealitySetsIn]

I wanted to add that x8 lanes is fine for your gpu, any gpu. It doesn’t even saturate 8 lanes with a 4090. If you look at gpu-z you will be able to see the lanes your gpu has after the m.2 is installed.

[@niravramdarie9898]

That 4080 fitting in that is impressive. Chris if could please do a video about that 14900k. How was the temps and what coolers would you recommend for the 14900k.

[@lifeofut]

super invaluable video! thank you for being so detailed and awesome!

[@screwthishi5thing]

Very comprehensive, thank you!

[@DukiDuri]

Surprised to see this so detailed video. I wonder how it would be if I build the case first. Every video for this QUBE 500 case builds the motherboard first, which is a good way when we start from all new components... but it's not a case for users who is just changing their cases only like me. As you said it will take more time than other PC cases, Im afraid spending too much time at once.

[@davidriggs7677]

I always love when you review something from Cooler Master. The automatic closed captioning renders it as "Killer Master." Which sounds pretty...well...killer. And for this particular video, very Halloween appropriate.

[@reallyryan_]

Beautiful build, love the channel, greetings from Scotland 💙

[@bracusforge7964]

Thanks for the comprehensive build guide + review!

[@newlynsteve]

I associate "fully modular" with a degree of flexibility not really apparent in this build. It appeared you were constrained to a single arrangement, in the end. A larger model, perhaps...? Anyway, another great instructional video, typical of this channel. Thank you.

[@pauloluis3960]

Hey Christopher! Great video as always. Love the channel.

[@stephanieamare]

I pretty much wonder how this case would be with something like a Cooler Master SHIFT. I'm looking to keep all of my components (which includes a 280 AiO) while using a RM100x SHIFT so the cables are on the side (without all of the text/info), rather than the butt.

[@nightshademilkshake1]

Question - could you not just draw air in from the top through the AIO and out the back?

[@-dimar-]

Many thanks, I did it thanks to your guide.

[@robkicsi5445]

Honestly these videos are invaluable. Amazing step by step explanations. Tha knyou

[@jamesb.walker9177]

The radiator fans should be reversed to intake, it would probally make a sizable difference on the CPU temperatures.

[@RealitySetsIn]

This board actually has 20 cpu lanes so if you put a gen 4 m.2 in the top slot you will keep the gpu at x16 and the dedicated 4 lanes will be used. Only if you use a gen 5 m.2 in slot 1 will it use 5 lanes dropping your gpu to x8.

[@Zag8166]

Hey Chris, do you think the same build would have worked out well with a 7800X3D instead?

[@thomasenright5282]

Very tight build not really enough room in this case, but I do enjoy your builds.

[@litebkt]

Your videos are brilliant. Thank you.

[@markotto1767]

i got an huge psu 180 mm lenght. Do you think it could fit ? It's modular with sleeved cables, but cooler master says a clearence of 173 max from top to first pci slot. i don't have aio on top, but full air. You used a 160 mm psu, mine is 20 mm more only but i'm worried about cables. Thanks

[@lucaschenJC]

Thanks for the video!

[@moekay9726]

Can i add the fans on the bottom and expect the whole airflow to be a little bit better since i don’t wanna lose the aesthetic?

[@CoffeeGameMovie]

Necessary to build it like this or can i just assembe the case first, then (as usual) after that put the parts in it? I didnt see any video int he internet where ppl build the case separately.

[@robrob2835]

Would be a nice case with two steel side panels. A swapable glass panel to the back makes no sense to me.

[@정세인트]

설명이 차분하고 목소리도 좋고~~~ 앞으로도 좋은 영상 부탁드립니다. ^^

[@markotto1767]

SMART BUILD Congrats ! ;-)

[@myc05m3]

Hi, i have a question. If I have an AMD Ryzen 5 3600 and an ASUS Motherboard PRIME B450M-A/CSM, will this be compatible for the IO of the case? the USB C function?

[@Franciscoxds]

i have a b650e asus mini itx motherboard. Would intalling my gen 4 m.2 into the gen 5 slot downgrade my pcle x16?

[@hxxdrroxkstarritzripp8627]

My power supply doesn’t have that connection do I need a new one?

[@sansdomicileconnu]

is it a good case for a amd 7950x3d and a geforce 4080 and two 3,5" hard drive and 2 2,5" ssd?

[@bharatkashyap7862]

Yes you can install 3 ssd of 2.5 inch at the back panel and 3 hdd of 3.5inch in lower bay or door grill.

[@koreainsincere]

I suppose that's the point isn't it? If you're shelling out for i9 and 4080 you aren't going to want to skimp 80 quid on the case are you?

[@napoficial7123]

👏👏👏👏

[@westy8367]

😊

[@Dyn4m1ke]

With all the Modularity in This Case no Option to use a 5.25 Slot is absolut wasted imo - Sad Coolermaster

[@1tzelG_]

seems not to be sleeving friendly.

[@vladsta3833]

Such parts in this case is heresy