Cooling System (1Of2): Coolant Replacement | AIR Bleeding | Full Guide - Step By Step | CBR250R 2013

Table of Contents:
00:00 Coolant Replacement
0:08 Remove Covers
0:43 Drain The System Coolant
4:04 Drain The Reserve Tank
8:03 Distilled Water Flushing
8:22 Install: Drain Bolt & Siphon Hose
9:41 Fill The System With Coolant [Motorcycle Level Surface]
10:10 Coolant Specification
11:42 Bleed Air From The System
13:48 Fill The Reserve Tank With Coolant [Motorcycle Level Surface]
14:46 Credits
www.cbr250.net/threads/coolan...

[@vnnavin]

Very Helpful and educative.

[@corentinmartins5395]

The best video i see about coolant replacement. Thank you

[@mycbr250rdmotorcycling7]

Thanks👍

[@onroad1981]

최고의 영상

[@mycbr250rdmotorcycling7]

Thanks👍💖

[@JoaoMPSilva13]

I just did this for mine coupled with a water pipe replacement. Very very easy procedure. I flushed the old coolant out the system with distilled water before adding the new coolant though just like with the reserve. Also used honda coolant since it was 6 euros for 1 litre. This bike takes 1.1litres combined so I just topped up the rest in the reserve with distilled water.

[@mycbr250rdmotorcycling7]

Hi. For me 1 liter was enough for both, the coolant system, and the reserve container. According to the specifications, there should be more than 1 liter, 0.79 + 0.25 liters, which is 1.04 liters. I did not find it problematic to supplement the quantity to the reserve tank with distilled water, but in my case there was no such need.

[@JoaoMPSilva13]

@@mycbr250rdmotorcycling7 oh i see, at honda dealership where I bought the coolant they told me 1.1L. interesting

[@mycbr250rdmotorcycling7]

@@JoaoMPSilva13 1.1 Liter is when removal of the radiator and engine. Only draining is 0.79 Liter. Reserve tank 0.25 Liter.

[@JoaoMPSilva13]

@@mycbr250rdmotorcycling7 good to know, thanks

[@chukkaprasad4465]

Bro how to edjust head light lighting

[@mycbr250rdmotorcycling7]

OWNER'S MANUAL HONDA CBR250R/RA, P. 73

[@mycbr250rdmotorcycling7]

HONDA MAINTENANCE BOOK, P. 3-26

[@chukkaprasad4465]

Ok thank you

[@chukkaprasad4465]

Which engine oil and grade is best for cbr

[@mycbr250rdmotorcycling7]

@@chukkaprasad4465 For the CBR250R 2011-2013 model, Honda recommends a semi-synthetic oil of high quality 10W-30, a special standard oil that is suitable ONLY for motorcycles (MA2), BUT!!! it also depends, and can vary, depending on the climate in your area, for example: in Israel 10W-40 is recommended. Therefore the best answer for you can be obtained from your nearest Honda dealership at your place of residence.