Cool Tools | Soldering Overview by Karen Trexler | Learn the basics of soldering jewelry

Click here for the tools and supplies used in this video: cooltools.us/collections/sold...
In this video, Karen offers an introduction to soldering. Soldering is a wonderful skill for any maker, but especially for metal clay artists and post fabrication. In this overview, Karen walks through what is soldering, soldering skills and how to execute them.

[@BEEtheJOY]

Karen is an excellent instructor. This was a good lesson.

[@user-xl3ev8pb8q]

Great video! Thank you for sharing. You give very clear instructions and explanations as to why you use different materials. 😊

[@flyingcheff]

The hottest part of the flame is outside the "blue cone" beyond the fuel rich (cooler) blue cone area. Direct heat to where the heat is going. Also, just a helpful tip, placing solder inside the bezel when joining it and especially when soldering the bezel onto the back plate will eliminate solder scarring and facilitate clean work.

[@Chungustav]

Great explanation

[@flyingcheff]

Refreshingly accurate description of what happens to join two pieces of metal (with solder). I shall assign this video to my beginner students. I would love to see (hear) the explanation (by someone other than myself) of why hard solder can be used for all joins, consecutively. Thanks!

[@jilla4334]

Question - How do you keep the solder tips on the tube from drying out?

[@danasteindince1076]

Adding scotch tape to the tip and closing it off has worked for me. Paste hasnt dried up

[@cooltoolsvideos]

The solder paste stays pretty well in the tube as is. Some people put sewing pins down the tips if they leave the application end on to prevent drying. Hope this helps!

[@jilla4334]

You must be using fine silver for the small pieces, as you are not showing that there is a need to pickle the small piece before soldering to the larger one