RICOH MP201 MP171 MP161 MP301 Drum Repalcemnet

[@dvlidiomas4260]

Men i want to thank you because i could fix a problem because of this video.

[@MrRicoh]

They are very happy that my film was helpful to you. Regards.

[@dvlidiomas4260]

@@MrRicoh Tomas, how many screws do i need to screw the drum unit? i think that i unscrew 2 screws...

[@MrRicoh]

In my opinion, only one, but I do not remember so accurately ...

[@johni6559]

заявленный ресурс этого фотоиндуктора 45000 страниц. Обычно хватает на 75000, надёжнее поменять весь узел.

[@MrRicoh]

Но это дешевле

[@enda4524]

hi tomasz I wanted to ask about the ricoh mp201spf. the copy or print is faded on one side-3 -4 centimeters I have replaced drum and developer. problem not solved. optical cleaning nothing the problem still exists. could help me to understand what the solution is. thank you so much to resent us.

[@MrRicoh]

You should replace the transfer roll. But first, clean the small glass from the laser. She is located under the toner. Sure it's drudna and that's why you have a problem. Write to me, did it help?

[@enda4524]

@@MrRicoh excuse me what's drudna? Thank you Tomasz

[@enda4524]

@@MrRicoh Good evening Tomasz I tried to change the unit group 'drum of the ricoh mp201spf. I dismantled the laser unit and cleaned the optical parts. I changed it replace the transfer roller. I also say that the same transfer roller used that I replaced when I put it in the bushings there are the hooks in place with the clips underneath are the fingers which lock the bushings of the transfer roller. It could be the cause of the lightest copy or printing on an inner side of the machine. that posterirore for about 2-3 cm of width .graziedella courtesy and patience tomasz good evening and good wor

[@elsariguella]

Hello, what is the developer code for this models????? original developer???

[@MrRicoh]

there is no original developer for this machine there is only a replacement for www.copy-expert.pl/produkt.php?%20iden=241569

[@Bestfinder.380]

i need parts name of drum developer.

[@MrRicoh]

Name: Drum Unit 1515

[@davidgalswissa4321]

Hi, Do I need to repace the developer whan i replace the drum and the blade

[@MrRicoh]

you must replace it in this machine at the same time OPC DRUM, CLEANING BLADE and DEVELOP always aftre 60k

[@VadimPerv]

Непонятно, зачем менять фотовал, если там износ шестеренок / пластмассовых частей не даёт возможности дальнейшей эксплуатации драм-картриджа после смены 4-5 тонер-картриджей

[@MrRicoh]

пишите на английском языке, потому что я не понимаю

[@nmornet]

Lanier LD015 Follow instrctns. in right cover to remove The right cover does not exist I have broken How do I handle this error

[@MrRicoh]

It is possible that you have a broken part of the side panel flap. Find what is missing on the flap and think something

[@Bestfinder.380]

Hi, How are u My ricoh 171 give copy and print half page is dark and half page is light like this page [ 1 2 ] [ 3 4 ] for exp, 1 and 3 is normal dark but 3 and 4 so light

[@MrRicoh]

Drum unit lifetime is 45.000 prints. Check your counter

[@Bestfinder.380]

@@MrRicoh my drum unit counter is 37583

[@MrRicoh]

@@Bestfinder.380 So you have to check or replace developer gears in Drum unit. Or replace all Drum unit.

[@Bestfinder.380]

@@MrRicoh ok

[@max_rockatansky_2001]

These are meant to be change as a unit. Every piece of this unit wears out...

[@MrRicoh]

Yes you are right, it's valuable remarks. Części do kopiarek www.copy-expert.pl/ Facebook: facebook.com/Copy-Expert-113431678801597/ Części używane www.copy-expert.com/