Corian Solid Surface Sink Installation How To Video

[@AndyGraves]

Thanks for watching. If you have any ideas or questions please comment. Let me know if you have any ideas for future videos.

[@Michael--Hubbard]

Nice video. Do you have the link to that setter tool?

[@billnancyrussell9021]

Really liked the idea of hot gluing centering blocks. Very useful.

[@AndyGraves]

For sure. Once the glue is on you can just place it right on the counter and it's ready to clamp. Thanks for watching.

[@wags99999]

Andy you make it look much easier than it really is.. Another great job.

[@AndyGraves]

Probably been doing it too long. :)

[@cmohan3229]

Very nice - Cheenai ( India)

[@jbwentworthe6082]

I had a Corian sink and countertop years ago and just loved it ! So easy to keep clean. It was in a bathroom and now I would like to know if it can stand up to daily kitchen duty. We are renovating a kitchen.

[@AndyGraves]

Hello, yes I think it does. I've had a Corian sink in my kitchen for 9 years and it looks great. Food will dry on the sink but a quick scrub with ajax or bar keepers friend makes it like new. I have a Corian sink cleaning video.

[@laughpolice9068]

Love working with Corian. The only time I find it tricky is when working with sinks that have tight corners.

[@AndyGraves]

Agreed, some of them are so tight I have to hand grind them.

[@nishthawanchoo638]

Hey do you have a vedio on how you fixed this on the wall? I believe 2 sides of the wall?

[@AndyGraves]

This countertop was installed on a cabinet. No, I don't have a video.

[@davesheill9644]

Great video Andy. I am ready to assemble my oval undermount. My concern is the glue dripping onto the top inside of the bowl while inverted. How do I remove so as not to read into my 10 degree sink bit with the delrin covered bearing when trimming? could I smear a little vaseline near the bowl rim for easier glue removal? would appreciate your advice and thanks...... dave s

[@AndyGraves]

Hi Dave, The bearing is going to be below the glue. Do not put any oils on the bowl rim or The inside of the bowl, it's not necessary. The length of the bit should easily clear the adhesive. If you have any questions let me know. Andy

[@davesheill9644]

fantastic..... I will now proceed....thanks

[@AndyGraves]

How did it work out?

[@daisy1441]

Hi Andy. I am researching kitchen counter tops. HEIP! You are saying that Samsung - Staron, DuPont -Corian, HI-MACS, Livinstone, Maganite, Stonia have color matched, 2-part adhesive that is used to install their undermount sinks? Swanstone told me their undermounted Sinks are mounted with silicone caulk and brackets. That really felt wrong to me. Also help me understand; I thought a 2-part adhesive would be you applying something on the sink and something else on the counter. The more I know the better decision I can make. Thanks.

[@AndyGraves]

Undermount sinks are installed using silicone to create the seal. A seamed in sink is actually bonded to the underside of the countertop using a 2 part adhesive. Which style sink do you have?

[@daisy1441]

@@AndyGraves I am remodeling my kitchen. I think I want a poly-resin "Seamed in" sink or drop in sink. Thank You for letting me know the proper term to use when looking for a contractor. After looking at many "how to re-install a failing silicone with bracket undermounted kitchen sink, I know that is not what I want.

[@jaredfernandez8930]

Hi, what is the model number on you're router ??

[@AndyGraves]

Which one? They're are links in the description of some of them.

[@chiragsuvarna1131]

What router bit to you use

[@AndyGraves]

Go to routerbitsnow.com and find the bit that works for the brand sink you're using. Choose the 1/8" radius or 3/8" radius.

[@Z-add]

Have you ever created your own sink designs. Square sinks that don't require thermoforming to make.

[@AndyGraves]

Yes, we make ramp sinks but they typically require special drains.

[@Z-add]

@@AndyGraves can you post video of those sinks and the special drain

[@AndyGraves]

@@Z-add If I remember the next time we do one. I think I have pictures www.thefabricatornetwork.com/Forum/tabid/164/aft/260204/Default.aspx

[@dimafanas]

@@AndyGraves how much are you charging for custom undermount sink? Thanks

[@AndyGraves]

@@dimafanas Hello, you will have to contact Valerie at [e-mail] or 714-528-3789. She can get you a price.

[@shyamdusane5240]

Labour charge कैसा होता हे

[@AndyGraves]

This countertop would probably be close to $1500