Seeing waterfalls of steel chips change color in flight never gets old.
@Convolutedtubules Жыл бұрын
Even after years in the industry.
@ProkhorovAV Жыл бұрын
Both the tools and the videos are getting better and better! Keep improving, please👍
@b2dmastersniper9 ай бұрын
The shot at 1:12 is absolutely spectacular.
@machiningmaniacs4131 Жыл бұрын
Great stuff !
@Runkpapper Жыл бұрын
Does the tool perform better with air-blast than flow coolant? Or is it just for filming? How long tool life you got with this feeds and speeds? Love the slo-mo btw
@Convolutedtubules Жыл бұрын
Flood or mist coolant are always best.
@Stasiek_Zabojca Жыл бұрын
@@Convolutedtubules Not always, especially not in ISO P steels. Cold coolant may cause thermal schock in carbide tools, which causes micro cracks and premature tool failrue. There is a reason why some manufacturers have two cutting speeds for face mills in their catalogues; dry and wet, which is always lower.
@Convolutedtubules Жыл бұрын
@@Stasiek_Zabojca You are right, thank you.
@sandvikcoromant Жыл бұрын
@@Stasiek_Zabojca @DailyToker As a rule of thumb we should strive away from using coolant in all intermittent cutting such as milling. Coolant increases the temperature difference between when being in cut and out of cut. This leads to accelerated thermal cracking and shortened tool life. Internal air can be a great substitute to coolant in terms of chip evacuation and keeping hydraulic chucks within allowed operating temperatures.Some materials requires coolant, also in milling applications. In those cases a material specific grade made to run wet should be selected. Like in this case Plura-HD grade: M2CM with internal coolant channels and optimized grade
@magicman9486 Жыл бұрын
But i wonder how expensive they are?
@kisspeteristvan Жыл бұрын
12mm diameter cutter 5 flute , list price in europe 215€ +tax . if you buy in bulk and have a good deal , i guess you can half the price ?
@TheOnlyPsycho Жыл бұрын
Flint - Far from Me
@Davidmp5FR Жыл бұрын
insane
@jubjunior Жыл бұрын
Muito bom!
@gulch1969 Жыл бұрын
Please stop with the slo-mo stuff. It's not impressive at all. We get it, end mills make chips fly. I want to actually HEAR the tool cut.
@sandvikcoromant Жыл бұрын
Hi there In the film you have plenty of sequences where you can hear the tool cut since we know that is important. The slow motion sequences we have are there to show the tool engagement more in detail, also you can see the chip formation. This is an appreciated part of these demo films since it show the performance of the tool in a visual way. Hope you will enjoy our films.
@thedutchgamerguy8580 Жыл бұрын
I like the slomo's, good idea how its cutting
@gulch1969 Жыл бұрын
@@sandvikcoromant I do enjoy your films, and am a regular buyer of a lot of your tooling. I especially love the Duramill end mills. Have never tried the Plura though.
@buckwheatclark Жыл бұрын
Don't listen to @gulch1969, he only uses HSS.
@AdityaMehendale Жыл бұрын
Both are present in the video - the SloMo gives an idea of the evenness and discoloration of the chips (which is equally indicative of the quality of the cutter). PS - @Sandvik GJ for changing the name to the known and trusted "Sandvik" instead of "Alliema" or whatever.