Corrado sunroof fix

[@vwvento9388]

I put an o-ring around mine and haven’t had a problem with it 6 months later

[@stevenharpervw]

I think that’s what vw did but over time they fell off

[@adamkartzke2581]

I fixed mine by just replacing the original rubber ring on the back of that bit with an o-ring from a universal air conditioning o-ring Kit. One one each side

[@stevenharpervw]

Adam Kartzke yep that will work if the little wheel isn’t damaged. Mine were nearly flat

[@labatallatacosarabes476]

tks for the tip bro..!

[@stevenharpervw]

Like and subscribe

[@sixty-one_bug]

Thank you, very helpfull but its a little hard to see what you did on the piece that broke

[@stevenharpervw]

email me and i can send you some pics [e-mail] or build thread www.autostadt.ie/phpbb3/viewtopic.php?f=162&t=14271&sid=bb1488844de7a93103e90fc416225ceb

[@williamkerr1059]

are the profiles of the left and right hammers identical? if so I'll maybe have a crack at building up the dud side with auto repair chewing gum.

[@stevenharpervw]

I think so

[@stevenharpervw]

ReverendFrogF1 Great video but i think when I removed the sunroof to repair the little hammer properly the mechanism and cables have become totally misaligned. do you have guidance as to how to reset them and what... sorry i pressed the wrong button and lost your comment. the way to reset your sunroof is to remove the sunroof lid and motor ( impontant step make sure motor is removed) and then physically slide the two holders for the sunroof all the way up and so the holders for the SUNROOF are in the TILT position. then plug your motor into the sunroof cable power but not into the sunroof, and press up the motor will spin when it stops press it again and it will spin a bit more. ( it might or might not spin the second time) now the MOTOR is in the TILT position. now you can reattach the motor into the sunroof frame and it should all work add me on facebook and i can help you more if you need facebook.com/impondering

[@eddieo3995]

My sunroof tilts but it does not close on the left side when i attempt to close it. Any tips would be greatly appreciated

[@stevenharpervw]

ya my guess is the arm is broken where it slides on the deck. so rather that going up and down becasue its split in half, one part is "pushing" the broken part , making your roof go up but when your press down, where its split one part is getting left behind, leaving one half if your room still up. thats what happened on my first corrado sunroof, im put in a whole new roof. if you do take the lid off press up and down your might seee it. also the long (30cm long arms) read the serial code on them. mine were different codes and had different profiles. so if you do buy a new sunroof down throw away the old oneas your may need one ofthose 2 arms if again the new sunroof has different arms codes

[@stevenharpervw]

Also read the code on the long arm that attaches to the lid. Somethings from the factory they have different codes and different profiles which makes the lids sit crooked

[@dgman2k12.5]

Hello Steven ! Do you have any instagram,snap or facebook ? I have a Golf MK3, i have it for over 30 years (first owner my grandpa,then dad and now me) and since we have new cars now, the golf is left to rust. But i want to rebuild it, fix it and everything. So it would be pretty good if i can get in touch with you so you can help me with that. =] I can pay for your time. best regards !

[@stevenharpervw]

Instagram @. impondering

[@dgman2k12.5]

@@stevenharpervw Followed you, my name s.dg.t

[@tmatrinh1866]

Uuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuu

[@stevenharpervw]

😊😊😊😊