Corsa D windscreen washers not working

washer bottle pump / filter removal
feel free to give me feed back good/bad will be appreciate
like and subscribe.

[@billm.2477]

Thanks so much for this -just used this vid for my Corsa -and job done! I found I could only push the pump upwards (couldn't pop it right out) but that cleared the space to remove the filter (filled with gunk -exctly like yours) and now all 3 jets are working again. Thanks again for an excellent, clear explanation -great work :)

[@properjob7970]

You're welcome, glad you found it useful. 🙂👍

[@Dmerg]

You've just saved me an MOT failure next month, surprise surprise the filter was clogged. Cheers!

[@properjob7970]

That's what I like to hear! You're welcome

[@jasondower6419]

Thank you. Saves me a lot of work as I did the water pump filter and fixed problem as I could see a little water when working and the pump noise. Great video

[@properjob7970]

You're welcome, thanks for your comment 😊

[@Neri42]

Thank you! You helped me 100% with this Video

[@Ericcartman8126]

Yes I found this "remotely useful" haha - in fact I found it completely useful, saved me a ton of time diagnosing the fault. Thanks for taking the time to post this

[@properjob7970]

You're welcome, thanks for your feedback 👍

[@gattoflyer]

Good video. Thanks for taking the time to post this.

[@properjob7970]

You're welcome, thanks for your comment.

[@nicksullivan1615]

Great video thanks 👍

[@properjob7970]

You're welcome, thank you 😊

[@smurfiennes]

Thank you, I’ll clean also the little filter as well

[@properjob7970]

You're welcome, thanks for your comment. 🙂

[@Watkinsss]

Good vid, thanks for the help!

[@properjob7970]

You're welcome, and thank you.

[@KendalSmithy]

Nice one. Just what I was looking for so will tackle it forthwith.

[@properjob7970]

Good, thanks for your comment. Good luck 🙂

[@blazecsf5124]

excellent thaks

[@properjob7970]

You're welcome 🙂

[@blackhurst98]

1st had trouble getting the rusted screw out of the wheel arch lining and the reservoir bottle full of gunk like the bottle had a skin of gunk growing in the walls sadly I broke one of the pipes

[@properjob7970]

That's the joys of working on car's, you could try putting some washing up liquid in the water tank to break up the gunk. Is the pipe broken at the connector? You could shorten it maybe.

[@blackhurst98]

@@properjob7970 thanks it was the little u bend that joins the pump I pushed the pipe up to the top of engine so I could get a better look the end cracked so I just used some electrical tape to tighten connection pipe seems to holding

[@properjob7970]

Ideal, that should work OK. It doesn't really put a lot of pressure on the pipes. Cheers

[@seyid_can]

👍

[@davidcurry4485]

Hi there, great video .i have a corsa d 2010 with the same problem. Im having problems with the lining screws. Do they unscrew or are they pop rivets. Whats the best tool to remove them. Thanks

[@properjob7970]

Thank you, I believe they are like a pin that makes it expand in the hole to secure the lining. You can push it right through and then remove it, but you may lose the centre pin. Hope this helps, cheers