Corvette Front Splitter Mod Stage 2 installation

[@joemessman1]

Thanks for the tutorial. I bought the splitter and installed it and searched for what it would look like with the side caps. Looks great! I'll buy them.

[@ozzstars_cars]

Enjoy that sporty look!

[@BigDog50001]

Nice job Glen, looks great!

[@RustyGlovebox]

Looks great Glen and completes the package 😎

[@ozzstars_cars]

**3M Super Strength Molding Tape** amzn.to/389zU8c **Corvette C7 Stage 2 Style Splitter EOS** amzn.to/3pQz8mB Thanks for checking out the video. -Glen (Ozz)

[@scottreed6270]

Outstanding and thanks! Getting ready to put one on mine as soon as it gets here next week!

[@ozzstars_cars]

Nice!

[@wyattoneable]

I almost missed this one. The splitter adds to the front end's "scrupled" look. Nice.

[@ozzstars_cars]

Get yourself one for the C6. ;-) Looks badass in my opinion.

[@wyattoneable]

@@ozzstars_cars It's a point I'd like to hear about actually. I have a splitter on my C5 and it looks cool, but man is it low. Since it's my wife's car (that was my excuse anyway) she doesn't grasp the idea that she can't continue to drive over roadkill. She's brought home more than one dead animal in the suspension. And forget about approaching a drive way at an angle. That splitter will be ground to nothing in no time. By the way, after 90 days the post office finally delivered the title. Now she wants a "girly" license plate.

[@ozzstars_cars]

@@wyattoneable good news and a relief that you finally got the paperwork. Sending the wife to Corvette racing school? 😂

[@williamrivera4257]

Thanks for the tutorial on rivet removal. Much appreciated.

[@ozzstars_cars]

Glad it was helpful! Will. 👍

[@chrissimon8403]

Good job Glen!!

[@ozzstars_cars]

Thanks Chris

[@swfloridacarguy1987]

Glen, did the stage 2 from Acs composite on my 17 grand sport about a year ago expensive but top quality..

[@ozzstars_cars]

That's a sweet ride!

[@stingk5295]

Great job, mine is a Stage 3, awesome.

[@ozzstars_cars]

Good choice! Makes a huge difference in appearance! Thanks Sting

[@SteveRobReviews]

Looks like factory to me . I can't remember ever seeing rivets used on the assembly line but it's a lot better than them plastic push clips forsure . That 3m tape has kept my body side mouldings on for 20 years for my Silverado so I think your good . 👍

[@ozzstars_cars]

So far so good with the 3M tape holding. Of course 20 years ago the stuff was probably not environmentally friendly and lasts longer. Haha I was thinking about what you said about the rivets. I have toured the Corvette assembly plant and the splitters and side skirts are put inside the car to avoid damage during shipping because the car site so low to the ground. The dealer prep folks install them. Thanks for the brain refresher Steve!

[@txsviking]

That looks great. Nice improvement.

[@ozzstars_cars]

Thanks sir, have a good weekend Terry.

[@nallen6559]

Looks really nice, thanks!

[@ozzstars_cars]

Thanks and I agree. Holding up well and still looks like new. No problems.

[@SmittySmithsonite]

Nice work, Glen! Looks like the name, "Corvette", along with the name, "Harley-Davidson", both have the same ancient Indian meaning of, "3,000% parts markup". 😁

[@ozzstars_cars]

Absolutley, a huge profit on that stuff.

[@shawnwinters4327]

Just bought one gonna install it today . Can u use self tap screws from the back on the winglets . I have some on the way idk if I will use them or not . The tape eos sends is it not good enough like 3 m

[@ozzstars_cars]

@shawnwinters4327 the tape has lasted with no problems at speeds over 100 mph. Applied correctly to a clean surface. Enjoy the new look!

[@sixtyfiveford]

Looks good

[@ozzstars_cars]

Thanks man

[@sixtyfiveford]

@@ozzstars_cars One day I'll get me a fast car. I wanted a Porsche for years but a test drive one I didn't realize how cheap the interiors are made and how crappy they feel. If I did get one I think I would just get a 65 Ford Cobra replica.

[@ozzstars_cars]

@@sixtyfiveford the used Cobras are a lot of fun (performance) for the money. Every hard working deserving man deserves a really cool car and wrist watch at least once in their lifetime.👍💯

[@dateatorjr9671]

Looks great. I think I would use body panel adhesive instead of the tape though. I don’t mind it as a secondary support like on my Z71 mouldings but not by itself. I hope they stay on! 🙏🏼

[@ozzstars_cars]

Thanks buddy. I drove the car the other day at 90 mph steady for a while. No problems so far. That 3M super strength is strong. The rep at EOS have me 3 months so we'll see. 😄

[@dadsacc7921]

Thank you. Very helpful video.

[@ozzstars_cars]

Thanks for the comment. -Glen

[@drivescorvette]

Could you comment on what differences you observed in driving around between the OEM splitter and the EOS stage 2. I want to get a stage 2 but have some challenging streets and store entrances. The way you lined up the two, showing the EOS being only slightly longer at the center but over an inch off to the side where it may not impact when it will scrape. What do you think?

[@hasbeengood]

Looks great Ozz, glad you didn't capitulate! Let me know if it makes a difference in the Food Lion's parking lot.

[@ozzstars_cars]

Batman told me he was jealous. 😄 looks amazing in the Petco parking lot today. Bought my daughter a hamster, his first ride home was special. Haha 🐹

[@themechanic6117]

Looks good to me 👍

[@ozzstars_cars]

👍

[@jacksondaniels8169]

I've replaced 3 of these splitters due to my own fault. First, I would never trust tape to hold the winglets on regardless of what EOS notes in the instructions. I'd say if you trust that you'll be purchasing another set. Nevertheless, even GM doesn't use tape. They screw it into the splitter as my original OEM did. Maybe an adhesive bonding agent, but not tape. You also noted that GM doesn't use bolts to install the winglets, and I'd say that is incorrect information. The Stage 2 OEM splitter part number 23347403 ($1300) specifically shows bolts that attach winglets. Which is exactly what both my and my son's car has. The splitter that does not use bolts is the ZR1 splitter because, yes, it is fully molded.

[@ozzstars_cars]

@jacksondaniels8169 these wingleys have been on for years now with 3M tape only. Speeds in excess of 100 mph with no issues at all, not once. You can come see it for yourself. For $300 the EOS stage 2 front splitter is a bargain!!!

[@243wayne1]

@@ozzstars_cars Thank you so much Glen for all of your instruction. It is greatly appreciated.

[@petar443]

Nice work. Looks better already. Sidemarks are crap though..

[@CLCUADRA505]

Great video man! Does the package comes with the 3m tape?

[@ozzstars_cars]

No it doesn't. Links are pinned in the comments and posted in the description. Thanks

[@kilo5065]

Hello looks great on your car. First I just want to think you for this video. I was debating on whether to buy that same front splitter off ebay from the same company or not, because I couldn't see how the end caps would go on. And also someone was saying buying it from ebay instead of a corvette site...it might not fit properly, look good etc.Over all what do you think about the product.

[@ozzstars_cars]

I think the EOS front splitter is a great value for the price. Winglets have held on fine, no issues.

[@salbigdaddyc]

It looks great 👍 Great video, are going to sell the old splitter?

[@ozzstars_cars]

Thanks. No, the next owner will get all of the factory parts for NCRS judging purposes.

[@dadsacc7921]

How did the 3m tape hold up on the winglets?

[@ozzstars_cars]

Excellent! I have hit triple digit mph and no problem at all.

[@actionpartners6682]

Now, how would you apply sliplo for bumper protection

[@ozzstars_cars]

What is sliplo?

[@actionpartners6682]

@@ozzstars_cars hey first, thanks for replying so quickly. 2nd sliplo is the bumper guard protection for low profile cars.. Btw I have the same eos front splitter. I want to protect it from curb rash

[@ozzstars_cars]

@@actionpartners6682 I avoid spending money on stuff like that and avoid hitting curbs.👍

[@loxety]

How much horse power did this add to the car?

[@ozzstars_cars]

At least 10. 😁

[@georgeanddaddecker7563]

Should of went ACS , much better quality and mounts like OEM.

[@ozzstars_cars]

Not worth the money to me. This EOS looks and works awesome for the price. I have been every pleased so far. The liability of it being easily damaged by a curb or road debris isn't worth the extra money when it's a quality part.

[@HowtoAutomotive]

First 😎

[@ozzstars_cars]

You beat me to it. 😃

[@HowtoAutomotive]

The car looks amazing!

[@ozzstars_cars]

@@HowtoAutomotive thanks man. If you saw any dirty specs I may have missed let me know, I'll clean it right up! Haha

[@HowtoAutomotive]

@@ozzstars_cars That car is cleaner than when it came off the factory assembly line

[@ozzstars_cars]

@@HowtoAutomotive 💯👍

[@CorvetteCaneCorso]

dang that part looks really cheaply made :( I like your car though!

[@ozzstars_cars]

Not cheap at all and it looks awesome!