Mouse trap is working against us……

[@GreggMundkowsky-pj6zd]

After watching Cory opening boxes with a grinder, you need to change the shirts from safety third to "Check your safety at the door"

[@davevoorhees5994]

Absolutely my favorite Hannah quote “Is that a poop tank why is the water brown” 🤣🤣🤣🤣🤣

[@corywheatcustoms]

😂

[@jeffross3428]

Cory it's a manure spreader chain that pushes the manure out the back ff the spreader

[@markstegman9683]

My favorite You Tube channel! You 2 are so real. I like that you work things out together and don't act like you know everything.

[@ItsjustChris95]

I love to see the clips at the end. It's cool to see you doing things other than doing cars. You guys are awesome !

[@peterwall4739]

Love you guys! Hannah your comebacks make me howl... Haha😅 who woulda thought..

[@The-Deadbolt-Deputy]

I love it when you two hit the scrap yard. It’s like heaven for y’all.

[@Autigers2013]

Love these guys, so grateful I dmfound this awesome channel!!!

[@john1bolen2]

As anyone mentioned…. Invest in a bead roller. Even simple straight beads would add dimension.

[@bobmcdougal738]

I enjoy your videos . Most entertaining thing I’ve seen all week. Keep up the great work.

[@corywheatcustoms]

Thank you !!

[@blakeevans9090]

You two keep us entertained!!

[@johnkranz4004]

Great idea with the tank but you need oxygen acetylene tank it’s looking very good Hannah and Cory

[@tommytnich6637]

Cory you're going to have to take Hannah to a really nice dinner. Not every wife would hang out in the garage and help build these cars..

[@shamusdiecastkustoms8363]

Had Safety Training at work Company wasn't Excited About my Safety Third shirt. Good video Keep them coming

[@plumpii7177]

I thought you guys were singing Lonely Island.. Step 1 Cut a hole in the box Step 2 Put your junk in that box Step 3 Make her open the box And that's the way you do it...

[@leongraham54]

The chain is off a manure spreader , you clean out barn stalls. And then spread it on the field via the chain cleaning bottom of the spreader.

[@donscarborough1951]

Great Video.. Y'all are amazingly fun to with with it. Love every minute...

[@michaelmonday418]

One piece at a time, getting closer. Looking really good!

[@roypowell3450]

Super! Your videos get better every week, love Crossley build. Going to purchase Cory's box opener now!😉. Get him to take you out for dinner Hannah...Take care from the UK.

[@tmoetownjackson6992]

hey yall. right where the chain was there was a smaller daimeter tank that yall could use time 48:51

[@HOTHUDSON54]

link belt with the cross bars is used in a farm manure spreader the wheels or PTO powers the belt that moves the contents of the spreader to the back . Long ago in a place far away, I was a teen who worked on my Granddads dairy farm. Got to fix links too many times!

[@Radar8717]

The mix is boiled Linseed oil with odorless mineral spirits or just cheap paint thinner.

[@lostreb]

I've been fortunate enough to be on this great planet over 3/4 of a Century, and I said all that so maybe everyone will understand the impact that the "First" of Cory opening boxes with a grinder had on me!!! That's most definitely a First for me. And at my age!?!?!?!? "Firsts" are few and far between. I'm still ROTFLMAO about Cory opening boxes with the grinder! Thank you both for all the smiles you bring!! Please keep the great videos coming.

[@78ramcharger53]

I know I've gained wait,OMG I really laughed out loud ,she's so funny.

[@kevincoverstone6479]

Corey I don’t know what the bucket and a mop song is about but that was hilarious because Corey didn’t even know Hanna was videotaping.

[@slotterhauze]

Good choice on the chains!! They are the drag chains from a manure spreader. So clean your hands good after handling them!!! I used them as fuel tank straps on my ratrod. Keep up the great work, because I'm digging it!!!!

[@donaldrizzo8373]

These two are hilarious they’re worried about the tank blowing up what you want and she’s worried about him wearing a face mask they’re hilarious as hell I absolutely love watching them

[@lofty7180]

Puddin swears by the Sweet patina , especially those hand wipes.

[@jonathanswayer2884]

🤣 "If it's not fine, we'll be the first to know....."

[@xxjoetaylorxx]

If you can check around in some of the oxygen and acetylene stores they have old tanks there they can't certify that's much smaller and rounder

[@alharmon9650]

It's at the bottom of manure. That's what move the manure from the front to back of spreader

[@randyhornhunter7449]

I've been using my angle grinder wrong apparently!😁

[@toddstevenson3682]

I love your videos whether you get much done or not.

[@kenvangoe9358]

The collaboration on the projects is like being married take a little give a little and in the end all is good just like this video be careful and stay safe my friends God love ya both.

[@78ramcharger53]

Good call on the shield Hanah.

[@bevblennerhassett3041]

you could have used the propane tank still without narrowing it... I wish to have suggested to lay it in place as you had it, measure up about 8 or so inches on both sides, and cut the sides front to back. turn the pieces around to create a cove, or switch the left side to right, and the right side to left? I think when you narrowed the tank, it would have still looked good in there, but Hope your new plan works out. Thanks for taking the time to read this?

[@rockin86ranger]

That chain came out of a spreader, probably a manure spreader. The chain pulls the slats which move the manure to some paddles that spin and fling it out in a field.

[@ronaldsteveson76]

I'm glad to see other folks doing the ol'trail& error thing😊. What size hiems are those in the pan hard bar?

[@edsecorr7812]

Great job looking great love your videos keep it going thank you

[@jamesmorgan1024]

When you are washing the motor and transmission spray oven cleaner on it let it set 30-40 minutes rinse it off it works

[@bobbyelliott1911]

Love the sweet patina that's a great find Very cool

[@floydstowe]

When your building something without a blueprint it's trial and error sometimes it works sometimes you redesign trial and error

[@donaldandireneyoung3089]

That Sweet Patina Oil is legit! Can't wait to see you try it on Hannah's truck...sweet!

[@brucewrandol]

It looks like the chain that is son a manure spreader. Something has to pull the poop. There are crossbars with paddles that is hooked to the chain.

[@boballen2150]

cut the bottom of the tank at the halfway mark, swap the bottom sides to make the lower half concave. More room, still a cool top.

[@dintexas2095]

You sold me ! Going to buy this for my farm truck . Thanks! 😊

[@SeansNewWorld]

How fast will that diesel go through ten gallons? Hannah, the stuff inside the door is a tar based sound deadener spray material. I love the can idea for the transmission tunnel. Better to be unique than doing the same old stuff.

[@mce1212]

Love y’all’s channel

[@johnperun232]

👍Great Content and Video 👍Thanx for Sharing your thoughts and ideas for your Rat Rod, I'm new to this Channel, I've been watching Cory and Hannah, just subscribed , keep up with all of the great work 👍 Have a Great Day 👍 God Bless America 🇺🇸🙏🇺🇸 Did see you at Pigeon couple of weeks ago, but you were busy, maybe next time 😊😊

[@edwardhughes3240]

You entertained today! I wondered if the seats would even fit with the full sized tank in there. Just remember, a lot of what you do is trial and error. Thak you two for being honest! Eddie

[@herenow2895]

You guys could do with a bead roller, to put some rigidity and vibration damping into those big panels you're making.

[@gmray7301]

It is from a grain lift to unload the truck. It is like a conveyer

[@kristineumann1281]

This is Keith suggestion for photographic purposes install a spring base old cb radio antenna to the trailer hitch to give the mouse its tail use the really tall antenna it would make a good photo

[@vinniegillotti9347]

Three or 4 inches of metal straight up off of the floor and half of your propane tank here you still have the propane tank look and half the size

[@donaldrizzo8373]

Oh my bad let’s not worry about the extension cord which is going to be wet as soon as he cuts into it and it sprays him in the grinder and on top of it is using a cutting wheel gotta love it

[@davidechols6797]

Looking awesome guys

[@steveleach6641]

Patina preservation Mineral spirits Boiled linseed oil Mixed 2:1 spirits to oil or there abouts

[@skeeet5758]

I tell you that is my favorite build of the year so far...

[@chadwickstanley1258]

Puddin be happy lol

[@stevecr8934]

Propane Tanks come in different size diameters n lengths 50 gal is as long but smaller around. TIP.

[@kentuckybluegrassliving7718]

The driveshaft tunnel needs to be secure to protect you if it fails your sitting beside it a lot better than thin gas cans . But secure it really good and Hannah got to keep your hair away from the spinning driveshaft

[@mackwilhite3656]

Quick question…. Do you park the “Farm Truck” out of the way so the fork lift won’t hit it? 😂

[@corywheatcustoms]

Well it’s safe over there lol I sold the fork lift 🤪

[@mackwilhite3656]

@@corywheatcustoms LOL!!!

[@chipmiller9074]

That is wide center will you seats fit in ?

[@alehman233]

Pretty sure that chain link is off of a conveyor for hay bales. Used a lot on Amish farms.

[@markdebano944]

😂😂😂😂 Hanna you’re close but it’s a Manure spreader chain that moves the manure back in the wagon to the back. Great job guys keep it up

[@AmericanmadeKustomz]

Cut the tank in half on the other side and remove same amount as the side you had removed. Would make the tank round again

[@heathatkinson9491]

walking floor chain conveyor in a manure or fert iliser speader is what them chains are.

[@AprilMoostoos-zk4lr]

I just noticed when Hannah was welding with the mug she was pull wasn’t sure if she new you push with a mug and pull with an arc,she made a comment did you think I was going to push and I wasn’t sure is she was just fuckn around or not,

[@728potsie]

cory do think a settling tank will work. it's smaller that the propane tank.

[@kirk467]

Derek from ViseGrip Garage has a mixture he makes up himself for the Patina on his vehicles! I don’t know the mixture but it seems to work pretty good! Y’all know what looks cool, square key stock heated and twisted! It’s a old conveyor chain, Hannah is right! I think the propane tank is going to look good you guys! I thought y’all had a plasma torch, would be faster since it’s open now! Hannah, hand paint “Propane “ on the side of the tank! That might look pretty cool! That’s a good idea to cut it in half and reconnect it the size you want! Fabrication means you can do what you want, just cut it and weld it! I’ll be back next Tuesday my friends, thanks for sharing Hannah and Corey! Kirk from Louisiana, sending prayers for you and your families! 🙏🏻🙏🏻🙏🏻👌🏻👌🏻👌🏻🤙🏻🤙🏻🤙🏻🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸

[@jamessmit2731]

The chain conveyer stuff is from a manure spreader floor

[@jamessmit2731]

I can honestly say that I have never seen anybody use a grinder to open a cardboard box 😂

[@Autigers2013]

That dog is precious!!!

[@raymondwinger1840]

Pest control people use what looks like an Asedelin bottle which would be a lot skinnier and look fantastic and you could put your poison stickers you can order online on that. Mouse Trape looks cool I can't wait to see it done.

[@jacklambright-lj8yg]

the chain u got from junkyard is off a farm manure spreader

[@richardnoggen1674]

Cory is like a kid on Christmas morning!!! :)🛻.....OH Shiny Things!!..What were we doing??...lol...you 2 are awesome!

[@slimer240]

I would recommend making a couple of drive shaft hoops to protect you guys in case you snap a drive shaft or u joint and that thing starts swinging around in between you two.

[@corywheatcustoms]

That’s the plan 🤘🏼

[@slimer240]

I love your videos man you guys are doing exactly what I want to learn. I’m cringing watching Cory cut that tank not for the worry’s of blowing up but the fact he’s using a grinder that’s plugged in and the tank is filled with water lol good thing he didn’t get zapped.

[@dougwilson7530]

I wish I could say I never opened a box like that. Done it to many times though. Keep up the work you guys.

[@Plamukaroy]

hey Hannah ,if you say that was probably Haley ,,,many people don't understand that, you have to be identical twins like us to understand that joke .😂

[@richardmanchester114]

Hey Cory and Hannah, this is GunzNButter86 from Massachusetts.. I've been subscribed and watching your channel for almost a year now and absolutely Love the content that you put out, and wish I had the money to have you build me a sweet truck like Hannah's!!!!!!! Or one of the many other older truck body put onto a newer chassis and slammed with a 12 valve!!!!!! But I found your channel from watching Puddins Fab Shop, which I've been subscribed and watching him for a few years now... But he's always supporting the Sweet Patina products, cause he uses them all of the time!!!! And I'm not sure if you've seen any of his videos or met him at any events cause he lives in Pot County Oklahoma..... Lol but I just figured I'd try and interest you in checking out his channel and honestly I'd Love to see a combined build with you and him!!!! Cause he has an old International Semi truck/front part of the chassis with cab and running motor. Called "Wheel Hop Wilma" which he has some sweet rims and tires for it already, but I think that you and him could make it an Unbelievable Slammed Semi with 5th wheel for towing some of Puddins creations, like his Chevy station wagon that he's building rite now and a few of his Custom Box trucks!!!!! But again keep doing what you're doing cause I love the channel and wait for every Wednesday so I can see a new video from you!!!!!!!

[@piperig78]

That chain sure looks like it’s from the bottom of a manure spreader

[@glennstatham960]

You ALWAYS 'push a mig! The gas HAS to go in front of the weld!!

[@robertbiedermann4255]

That a pressure tank from a water well. 😂

[@EdwardDouglas-z5w]

Hay next time take a air hose and put it in the hole turn air on low and that will keep it clear of any gas from building up.

[@perrymccormick7028]

Don't cut the gas cans! You'll always want them back!

[@chopperman6]

The shield was a great idea to block getting electrocuted from the water leaking onto the electric grinder 😂😂😂

[@erichuff2538]

Good job on the shield 🛡 hannah.

[@Problem_child7.3]

I totally go to fairs just for funnel cakes lol

[@jessegoldston70]

Need to invest in a plasma cutter! Love the builds! Mouse trap needs cup holders lol

[@gerrygwilson2849]

That chain is out of throat of combine pulls the grain up into the machine 😮

[@Pure_KodiakWILD_Power]

The shellshocked thumbnail 😂🙏

[@dansimmons1964]

How about 2 or 3 military (jerry) gas cans welded end to end? They have the right shape.

[@dennishedrick5108]

Looks like a old hey conveyer

[@speedbuggy4095]

Weld a bung on top at the back and get a chemical spryer end an attaché it to the rear wheel tub like it's in a holder

[@justanoldman697]

Ahhh yes the ongoing drama of whether to push mig or to pull it..........I've been welding for 50 years and I pulled the torch and never pushed it.

[@charleswilliams8137]

I really like your box opener it's really not safe i guess you really need to know what you are doing with it please just be safe okay can I make a suggestion for your welding hood you should try a gold lens it really. Helps protect your eyes from the arc welding rays just try it i always use them thanks Charles

[@paulbehne914]

Center console: Wooden crates of Cheese.

[@steventhuss2487]

I JUST LUV U KID'S.

[@Autigers2013]

Corey please please unplug the grinder next time you use your hand to take the cutting disk off the grinder.

[@charlesloyd1970]

An old oxy bottle would work great for that spot. It can be braced up and will look more like a poison bottle.