Husqvarna VS Stihl | Autotune VS Fuel Injection | The best chainsaws on the planet

[@jasoncrocker9332]

People will always argue witch saw or brand is the best but I think it comes down to the better dealer in your area .you can’t go wrong with Husqvarna or Stihl

[@timhopkins7372]

My thoughts exactly

[@tomjones4318]

Yep, but I wish some American co. would make a modern high torq, low rev, low weight saw. If it's possible surely there's a market. The Euro saws are great but I don't like the scream. I'd gladly lose a second per cut.

[@livewithnick]

I didn’t realize witches were into using chainsaws? 🤷‍♂️

[@billyshumate853]

Jason I've got both Husky and Stihl

[@ajsangster5195]

@@timhopkins7372 k

[@nicholasdavis7178]

I’ve been watching you for years and waiting for this day 😂😂 it’s good to see an honest review from someone that actually knows what they’re talking about

[@chriscreech716]

You are a good person to go out run another brand of equipment. You are a stand up person. I value and respect your opinion. Have a good day.

[@danclas5983]

I've only ever ran Sthil's mainly because I am lucky to have a awesome dealer 5 miles down the road from me . Always wanted to try a Husky but but their only available at a big box store in my area . I totally agree with ya on the fuel caps , I carry a small paint brush in my kit to clean around the o-ring and have really never had a real problem . I run a 261 , 462 and a 500i and i find myself reaching for the 261 more times than not , love that little saw .

[@TheGoodguy68]

Also my favorite saw!

[@mattfleming86]

I feel the same way about my little 3510 echo. It's not a powerful saw, but it's extremely powerful for its WEIGHT. You only need a lot of saw when you need a lot of bar.

[@erniecyre971]

I am the Power equipment Tech for a Husqvarna and Stihl dealer and the price of the Stihl is more but no one thinks about if they have problems with the Stihl Fuel injection system and the cost of components if they need replacing. There both good saws, people need to research costs for repairs. Great video

[@derweibhai]

Just bought a 572 to complement my 562 I like so much. The thing that pisses my off so much about Stihl is that I can buy every Husky part all over, but have to go to a Stihl dealer and bend over to get even the smaller st part. They are worse.than John Deere!!!

[@mattfleming86]

Wait till they get a few more iterations on the computers/fuel injection.

[@atabor1000]

Awesome review!! Can't wait for the Husky 90cc saw. I bought the MS500i run it a couple months, sold it and keep running the MS462. Save your money and go with the MS462 or the Husky 572. You will never regret it.

[@daveyboy6985]

Why did you sell the 5000i.? And also why keep the 462 over 500i.? (Dave)

[@ericmacmillan565]

I’m a Stihl pro saw owner owner and very happy with their products. Keep them clean and they run! Husky pro saws are also very good. It is the person running it. Also I put west coast saw products on my Stihls and they are excellent as well

[@efrainestradachalinosombra9659]

Yes I compared stihl.is vast over all don't play that game Sr what you don't know is the run still up against husqavana. Husqavarna won't be running at the and off the day stihl would be running for many many many I mean many more day's cut the carp with all the respect.I hate husqavarna chainsaws am stihl man.till I died thanks again

[@troycoates5822]

Watched the whole vid, lots of great info, a nice detailed comparison. Really appreciate all the effort you put into your channel, some great content and it's great to see an honest comparison between Husky and Stihl. You'll be hitting 100K soon I'm sure!

[@markstanke984]

I’d run my ported 372xp against about anything other than a competition built saw. Absolute madness and it is so much fun to run

[@Tf9500]

I’m glad you started doing these comparison videos,it sure does add some informative entertainment. I really like my 572xp. Would be nice to see the Echo saw in a comparison. Thanks for the videos 👍

[@Psy6o]

A 272xp or a ms440 were bad ass saws from back in the day that were smooth and strong

[@kristystaats8390]

I've been running my sthil chain saw 7 years ,no problem with it

[@brucearney9536]

Try Carlton chains, their the best imo

[@thomasingramfarms230]

I never have liked a stihl saw but I broke down and bought the commercial telescoping pole saw year before last and I absolutely love it plenty of power, I even went back this summer and bought a commercial weed eater

[@thomasleonard1846]

Excellent review! Great tip on the filter, I have run Stihls for twenty years and my worst problems have been carburator issues, will rethink the Husky!

[@lightupyourlife111]

The Stihl he's using in the video is (Fuel Injected) Husky is Computer controlled Carb

[@mattfleming86]

What is your fuel situation?

[@jasonneugebauer5310]

Great video. I run 4 Sthil pro saws. I love the saws, except the air filter setup for the 661 and 500 are garbage. I am always finding dust getting under the filter and inside the engine. The filter on the 362 is a better design, and the 361 non pleated is better than any of their pleated filters. I used to have a consumer grade Husky in the early 2000s. The air filter stays clean all the time, but the saw would throw chains all the time and damage the drive links. Also used over double the gas that my 361 uses, while cutting half as fast.

[@woodfarmer8413]

I chose the 500i over the husky due to weight and the fuel injection, to replace my heavy 066. I agree that the fuel tank looks and feels cheap. However I am overall impressed with the saw so far. Good, straight forward video.

[@lonewolftech]

You’re going to regret that choice of it ever breaks in the field and you have to drive it to your nearest dealer for repairs as you cannot repair a fuel injected saw like you can a carbed one..

[@woodfarmer8413]

@@lonewolftech the last thing I am is a mechanic, I don’t work on my own saws anyways and I have a dozen of them so not really concerned about that

[@dozingnsloping6814]

Tim, thank you very much for this video. I stayed for the whole thing, I trust your opinion probably more than anyone I know. You answered every question that I have been curious about and I agree 100% with everything you said. I was a climber for 11yrs until a freak accident happened and I fell 40ft straight down. I still do tree work on the sides but unfortunately my accident caused me to have a fear of heights so I'm unable to climb. I'm a huge husky fan but was curious about the fuel injection because I'm in the market for a new saw. After your review my mind is made up and it looks like I'll be sticking with husqvarna.

[@stevewarner8880]

Good video and you make valid points on both. I run Stihl because there are literally no Husky dealers near me that carry the XP models. I’m not really interested in the 500. I recently bought a 462 and am really impressed with its power/weight ratio. Like you I have back and neck issues. I drop the big ones with my 660 then it goes on the truck and the 462 goes to work. Don’t worry about being on a limb. The truth will set you free!

[@larrywilliamsii7533]

Dealer location and service is big for me. Stihl is closer and quicker service. The price difference can easily be made up in production. More gas and oil is less time fueling. Great job doing comparison. I’m also concerned about where stihl lost the weight. The newer 661 are not as robust as the old 660.

[@billyrosenbaum968]

I use to run a saw all day. I'm 5 foot 4 inches and weight 130. I've had a bad back for many years. A Stihl is lite but the cost is not enough. Husky is my choice. I did comparison with them one time. Weight was the only advantage they had.

[@Will7981]

Considering the cheap air filter design and the gas cap design, I'd buy the Husky. I can't stand those Stihl gas caps. I've hated them since the first time I used them.

[@sjekkie8299]

got those caps from the first day they have them, always leak or you need to put a thicker sealing on it

[@sonsofliberty3081]

I think the idea was you were able to use your insulated gloves in the dead of winter. They pissed me off once or twice but I figured them out. The old caps you could stick your tool in for leverage. Quarter turns are nice but you can't tighten it down.

@@MikeHunt-ix2xy In couple spots..? Interesting... So there is more than one spot.

[@FishFind3000]

I’ve never had issues with my quarter turn cap and don’t have to struggle to open the old style gas cap needed a tool to tighten/loosen it.

[@adamfrisby7163]

Hey man I appreciate what you've done here, I have stihl and huskies I have certain ones I like and dislike. If u are familiar with the pro saws you'll find out what u like and hey, there's always gonna b some drawbacks from even ur favorite saw. I've had 66 stihls that I've ran all day and 288s I equal respect when the day is done so ur not alone when it comes to saw comparison.

[@wendyvinge3251]

I just came upon your channel a few days ago and really appreciate how detailed your info is. When you explain things it's easier to follow and understand what your saying than the other tree professionals. You don't seem to speed through what your saying or showing. Thanks Per

[@cotontop3]

Thank you 👍🏻

[@catman980h]

Good comparison Tim. Thank you for the time you put into it and the info shared. Good choice on the 660. Good friend of mine has a old one with a 32” bar. That thing is a beast! I have thought about buying one of the clones just to have it.

[@viperstrike3827]

If you get a clone get the neotec.

[@billymann5325]

I'm a Husky guy, but have just as much respect for Stihl. Other brands I could care less!

[@bullybluecoal1831]

Then you would appreciate old school Dolmar. That's the Sachs-Dolmar series. German engineering and built like the Husky. Husky still has the better AV system though. Some of the later dollies are not so bad either. Shame Makitacrap is phasing out gas power this year. Oh, Solo is another German saw ...... no where near as popular. They're all good when they cut, friend.

[@livewithnick]

So you care about other brands too then?

[@billymann5325]

@@livewithnick what you got?

[@headshrink1]

Great help. I like the pros and cons you point out. Especially for cost and efficiency of each saw. About to buy the Husky.

[@nathanvirag4589]

Great video looking at these two saws side by side. I looked at both last year. This video has a lot of the points I considered when looking at these saws I ended up getting a 572XP, partly because of your videos on the saw. I was skeptical of it at first but it has really blown me away with its performance. Keep up the great videos!

[@Matt-416]

That price difference is for completely different classes of saw. The 500i is a 390xp hunter. The MS462c is more on par with the 572xp. Stihl is redefining the classes with their very impressive "between" sized saws. MS400 & MS500i. Longevity is definitely on par. After being in the big wood of Canada's left coast for over a year, the 500i is holding up fine and is a clear favorite. As for the lightweight, my father thought the 371xp/372xp was a quick engine wrapped in cheap plastic. Yet, 20 years later, everyone knows how legendary that saw is. I see the evaporation of dedicated, full service Husqvarna Group dealers, combined with the bold innovation of Stihl, is creating a gap. And it's getting bigger every year. Whilst the air filtration is still lacking in Stihl, despite the effort of utilizing an "air injection" type of intake (though strangely lacking on the 500i), at least the intake is close to straight line. Flow helps with throttle response. The proven Husqvarna intake is still using an antiquated angle between filter and cylinder. Air doesn't like flowing at 90° of angle... neither does water, nor oil, nor even earthworms for that matter.. To me, it comes down to; more power, more torque, faster throttle, with the capability of pulling more chain in bigger wood, at a full pound lighter. And its almost turnkey starting that never loses its tune. Yeah, that's worth $400. No "pass" given, it's earned.

[@zack6892]

Idk I think for past a 32” bar the 390 would become the more obvious choice over the 500i and 32 and below I’d want the 500. Just my opinion with a little time with both saws however sounds like you’ve got much more time on them maybe there are aspects I’m not taking in to consideration. I’ve heard a lot of issues with hot starts on auto tune saws so the 3 series big saws seem like the go to for big timber at least in my experience and the crews I’ve gotten to work with.

[@Matt-416]

@@zack6892 The 3 series is absolutely epic!! I'm a huge fan! I personally believe that the 500i, 462, and 362 are directly because of how redefining the 371/372 was. It is my favorite saw too this day. But, because of OEM parts drying up, she's a shelf queen. But definitely motivating to look at. I don't play much of the "Ford vs Chevy" brand-loyalty nonsense. In my honest opinion, the MS462 feels, revs, and has the power-curve much closer to a ported 372xp than the 572xp does. The 572 feels like a bloated MS461 to me. My original point was that husky doesn't have anything to compete with the 500i in the same class. An 80cc saw with 70cc weight and 90cc power.... that's essentially turn-key. Granted, there is no replacement for displacement. However, an 80cc 500i doesn't feel far from a 90cc 390xp. Now, there's definitely a difference and it's noticable.... But nothing even approaching the difference between the power difference between a 60cc saw and a 70cc saw. Husky needs to step it up, instead of releasing heavier (& slightly more powerful) replacements for some truly epic saws. The Husqvarna 500 series isn't impressive at all. Especially when they've shut down dealer support over almost 60% of their locations and focusing primarily on Lowes and Home Depot.

[@jonathanlang9711]

I agree at the almost turnkey part absolutely. While the newer huskys especially with a muffler mod start almost always on the first pull (as well as my older 346xp muffler modded) you still have to pump fuel in beforehand, i prefer this system tbh because you really can make sure there aint no air in the carb. Tho the newer Stihls be it a 500i or be it a 170 they are fucking turnkey. Had a MS170 on hand wouldn't start. Put a Servicekit and a good clean including a tankflush and carb cleaning to it. It started first pull with a completely dried out carb I honestly don't get how this is even possible, no pumping no second pull nothing. No matter how fucking cold, next day it had -10°C and it would always start on a coldstart on the first damn pull.

[@Stevestractoradventures]

While I can't say exactly, but the weight maybe the weight of the carb. Im not sure totally. But I agree with you on the where the weight went from. Im a stihl guy and work at a stihl dealer and the 500's are hard to come by for us in PA anyhow. I have yet to lay hands on one. Thought on the air filter is add some sorta foam on the back of the cover just to make sure it pushed down. I know you shouldn't have too. But it will be cheap insurance. Thanks for makeing the vids.

[@jasonbertrand3295]

I work for a Stihl dealer. My Stihl supplier has raised the prices of most saws this year. The 500i I think went up $20.

[@scirustech]

I so appreciate your objective review of these saws, and the ancillary tech - spikes etc. thanks so much!!!!

[@patrickjoy9551]

These saws have been out long enough to have been put through the paces. What never seems to be mentioned is what is the fuel consumption difference between the Stihl and Husky. This should also be a consideration when purchasing. I am glad you address this. I have watched a lot of vids comparing the 70cc class and as far as speed of cut its very negligible between similar sized saws. So comfort (anti-vibe) and fuel efficiency in my mind are very important factors when choosing a saw. Dealer support is also important in the rare case you have issues. Fuel leaks on a now $1600 dollar saw is almost criminal. This should not be tolerated on a pro level saw from any manufacturer.

[@bodeine454]

The way I look at the Stihl fuel injected saw is that at least it's a starting point, are they perfect? No! I don't own one or have ever even ran one but to at least get a working model into the market gives room for all kinds of improvements. That's how you make things better, figure out the weak points and improve on them. As far as the Husky Auto Tune I have no idea, I'm not familiar with them but in this video it seemed to cut smoother than the Stihl. The idea is to compare and improve wherever possible! 👍

[@scrhino40]

I own 2 sthil and sold both of them after a year and bought 2 Husqvarna to replace the stihl. The Husqvarna won because of fuel and oil caps easier to get on and off. Husqvarma also run more fuel efficient and cut faster. Have a great day be safe

[@royceabbottsexcavation3709]

I personally like my 461. I’ll be waiting a while before getting a 500I.

[@TheYoungster17]

They have a serious issue of the fuel tanks cracking right around the hole and collapsing in. Here in the uk at least

[@fabzacres-blackcat]

Better off keeping the 461 .... word is the 500i is only lasting about 1/2 as long as the 461 in production Timber falling applications

[@jaredboswell9859]

This is one of the best comparison videos. Your honest opinion from hands on, video documented experience has been very helpful. Keep the videos coming, please.

[@brianquigley7336]

I been running Stihl and Husky for over 40 years. Both are good saws. They all have pros and cons. Like the ergos of the Stihl. Husky's got a better clutch, air filtration and AV . Husky's got terrible dealer support.

[@lonewolftech]

Never had an issue with husky’s support, but I can’t find a sthil dealer anywhere near me to make buying those over priced paperweights worth it. Plus I hate all things fuel injected, just more shit to fail on a job.

[@jbolin105]

I don't think you can go wrong with either saw. I have a few friends of mine that cut timber. They have 500i's and absolutely love them.

[@danielblanton3630]

Excellent video and excellent points. Been running stihl over 30 years and I am happy with them and utility and tree guys are happy with the Huskies.

[@petermccuskey1832]

Owning both saws I choose the husqvarna as being the better at this point having owned the stihl only 6 weeks. As I earlier stated I like the stihl with Sugi bar balance

[@hi4429]

I find the stock 500i to be stronger than a stock 572xp or stock 462c. By enough that you have to mod the other two to beat the 500i. Maybe next test use the same bar/chain. I find it’s the only accurate way to compare two saws in the wood. Just my opinion. Enjoy watching your content and saw reviews. You seem to be unbiased and point out the positive and negative in every saw you review.

[@jasonheitman100]

Thanks for your opinion and comparison of the 2 saws. I have been looking hard at the 500i for the weight. Both stihl and husky make good saws today like you say its all about personal preference and to me local dealer support.

[@stevenherring2447]

Would like to see you test out the new echo 7310p with those 2 saws or at least the husky. New echo is getting tons of good reviews from real saw folks like yourself.

[@holeshot1721]

Bucking logs with the 500i is so much better its so light and sipps on the fuel compared to my 460 and 660 nd so much lighter nd nimble

[@thim8009]

I switched from 372 husky's to 461 stihl modified. I love my stihls. Got a modded 661. I don't like ther chain, I run oregon exj chain.

[@angelwars3176]

Having run a lot of Husq' and Stihl gear over 30+ years I would say one of the advantages with Husq' is their attention to ergonomics and anti vibration in their products. The 572 may be a pound heavier but how does it actually feel with cross-cutting and snedding out?

[@cotontop3]

The ergonomics and anti vibe are still a lot better on the husky

[@angelwars3176]

@@cotontop3 That's good to know seeing as i've just bought one today to replace a stolen 395 (24" bar is as big as i need these days) Thanks for your reviews by the way - straightforward and no BS!

[@MrDukstr]

Thank You for this review! Although I know you like your Husky, you do give a very good assessment of the Stihl. Ps. I like the Husky too.

[@hkrueth00]

How is the balance on both saws. Meaning when you pick them up do they tip to the front or back. Years ago before I bought my first saw I lifted both and I didn’t like how the Stihl tipped forward and the husky stayed balanced. So I have been a husky fan ever since. Thanks Tim for a great review.

[@cotontop3]

The 500 has the better balance of the two that you’re talking about.

[@sklip8203]

Can you compare the 550xp mk2 and the 261 side by side?

[@timconnell5878]

I have a Stihl 441 magnum with the air injection. Not sure why it didn't get carried over to the new models.

[@stevenherring2447]

I was surprised when he announced the different cc because I thought the husky out preformed the stihl. And it sounded like the stihl was laboring a little. I do think the bark box will do the still justice.

[@jonthomas4674]

Thank you for doing that Tim. It’s videos like this that should keep good competition and improvements. I hope the right people watch this.

[@andybecker2693]

Guys that use the 500i to make a living with are finding out where the weight savings are coming from. The plastics are thin and the air filter cover doesn’t lock down correctly to hold the air filter. The top cover gets rattling very quickly. The clutch drum is thinner than other similar saws like the 462. The bar plate is thinner and some have worn through into the crankcase/ oil tank. Awesome saw but I don’t think it will last.

[@lonewolftech]

Sounds typical for sthil. From saws that will NOT restart after a shutdown to then cheating out year after year to this junk they sell today with Chinese parts and a high price tag.. husky or echo is to the only way to go. It’s sad that my old ass poulon pro 50cc saw out it’s my buddies sthils all day.. he got so embarrassed on a job the other day he went and bought him a husqvarna and he said he’s selling all his sthils and going husky. Now he gets it.

[@julianalderson3938]

Had a 357 gone now but loved it ran so well. Then got a 540xp mark 1 hated it sold it on auto tune was not good. But yer all pretty good if they run but if auto tune dosent sux. Great vid cheers

[@bryansterling2066]

I had 2 390xp I use my saws every day the first one only lasted year and 1/2 had to put crank bearings and seals in it got another another 390xp and had it 2 years and it blew up I cut trees by hand every day and I have a 461ms and it’s already out lasted both of them and I have a 661ms and love both of them just way better saws for me is the stihl

[@FishFind3000]

27:40 if you look on the power head it has a black line for your felling sights and bore sights

[@willbryan4813]

I personally like the Stihl chain tensioner better than the Husky. I feel like the cover really only needs to do that job. For instance, if you're in the field working and for some reason your side cover got broke. If the tensioner were busted on the Husky, you would have a hard time keeping the bar chain tight. The Stihl would still function as it's supposed to ( even though it would require the operator to be more careful than they normally would). I like what you said about how far technology has come on both saws. Either of the saw would be excellent choices for someone looking for a professional saw that's not so hard on your back.

[@weechippy4629]

But the husky does get the job done, like you see my husky made me have to work less as it was so effective

[@Mike3LV6]

stihl 500 are beasts but at all the huskys more handy. that's only my oponion. here in germany many dealers got both brands.

[@justinhiggins2210]

For every person that likes one brand you will find a person who likes another. I like the Stihls, I've got all the pro saws from the 880 to the 261 and 200t. Now at the end of the day what's the answer to 9 out 10 questions, money. Stihl is by orders of magnitude the best selling saw in the history of saws. Now with that let the hateful comments pour in I'm ready.

[@justinhiggins2210]

@@MikeHunt-ix2xy omg that was brilliant. Dude how did you come up with that. Would you be pissed if I copied that for future use, I will be sure to give you credit for it if I do.

[@geraldkeicher3723]

that was the best saw vs saw video i have seen...Thank you ,,,Nice job

[@mtrahan001]

To me just by watching the video . The Sthil sounded like it bogged down more during the cuts. Could be just me. Great video.

[@cotontop3]

I had them biting and was pushing both as much as I could get away with because I didn’t want anyone to say that I wasn’t.

[@jasonwatts1740]

@@cotontop3 I have to agree with Mike... The Stihl was chattering through the log, and audibly the Stihl was not revving as fast as the Husky. Maybe that was a result of the grind on the teeth or height of the depth gauges (no offense Tim). I've always believed that the Husky's run a higher RPM than Stihl, but the Stihl has more torque. Would you mind addressing the difference in smoothness and RPM's please?

[@cotontop3]

The chain on the stihl had not had the depth gauges touched at the time this video was filmed. That was one of the things I was talking about in the video I was trying to figure out what the stihl chain liked filing wise. I finally figured it out and got it smooth last week but I am not a fan of the stihl chain.

[@russburke3881]

I love these type of videos Thank you for doing a great job on them . I also Thought that the still sound like it bogged Down when you were cutting through the log Could it be the different chains or bars That would cause That phenomena

[@russburke3881]

On the Steels you had something that looked like it fit over the muffler you called it a bark separator I believe . I have never heard of such a thing I would like to know or understand what it's supposed to do and how it's supposed to do It and what the benefit is supposed to be for it . Anybody would like to explain that for me I'd appreciate it

[@glennmoore3764]

Thanks Tim, great comparison, straight up

[@williamgosnell9491]

In the cuts when Cotton was cutting, the Sthil bogged several times where the Husky didn’t. I’ve just always liked the husky and I have both.

[@michaelgardner3728]

I liked this video much better than the 261 verses the 550 . I haven't owned a Husqvarna since they started making inboard clutches .I cut firewood an clean up brush. If u cut a lot of brush even if use the top of the bar u will sometimes throw a chain an I can get back to cutting much faster an less hassle with the inboard clutch .

[@briantaylor180]

Great honest review, thanks! Hope to see you sometime in one of your classes!

[@logdog8920]

I could never figure it out either, Why after manufacturing saws for decades, that Stihl hasnt' got a better handle on air filtration.

[@mattfleming86]

Fines destroy engines. Then you get to buy a new one or make a service visit. Same with the fuel caps that funnel shjt into the tanks.

[@chrisp556]

The 500i IMO is over rated and the hype is what's selling it. Look up Egan Performance Saws on Facebook and check out his Straight Shot mufflers. On a MS462 he has a dyno chart where it gained a .5hp on a stock saw and its 15 bucks cheaper than the barkbox. The Durbin Compound done a comparison video with stock muffler, Barkbox and the Straight shot. The Straight shot was faster and ran cooler than the other 2.

[@levigranger5383]

Thing is durable as a rock too, very well built.

[@theopautsch2311]

I wonder if the extra pound will add up to more life I've had stihl saws and think the quality is going out the window

[@yahuahyahusha364]

STIHL vs HUSQVARNA is like AR vs AK. It’s all about preferences. I like Husqy’s and AK’s 🤷🏾‍♂️

[@lonewolftech]

Same here!

[@clintblackwell8873]

Looking forward to the 562XP vs. MS362!

[@jamesbainton]

People in Europe report that the 500i is pretty thirsty in the beginning, but normalizes after a while. Not sure on the exact number of tanks though...

[@gregbrassington2120]

Hi Tim . I own & run all the brands Echo ,Stihl & Husky .Yes it's all about personal preference & myself I like the Echo ,very underated super reliable & a lot of saw for the price ,with 5 years warranty.

[@bullybluecoal1831]

In fairness with the scale weigh in, the Sugi bars are a bit heavier than the Stihl lights. Stihl actually has the lightest line of guide bars. Followed by Oregon, then Sugis. There is also the Tusumara line up but I'm not aware of where they fall in the weigh in. BTW the Holtz bars, that are SS with replaceable sprocket noses, are made by Tusumara. Although those are not lightweights. As to the AutoCrap, MoronicTronic, and fuel injection ..... I prefer the carb run saws that the evil EPA dislikes. My 261C went down and because I'm not equipped to diagnose the chip, I had to drop it off at the dealer. I prefer to wrench on my own stuff. Anyways, enjoy your saws friends.

[@1962guy50]

I've never understood why STIHL has those tank caps. I think they fixed something that wasn't broken.

[@tomjones4318]

The twist lock is probly overly ambitious design. But to be fair the flip-up was Stihl's idea and a great one. Husky had the advantage of time to improve it.

[@dennisgt479]

A Stihl rep told me it was for emmisions law for gas tank venting.

[@tomjones4318]

@@dennisgt479 Odd, my new Stihl 94R string trimmer has a plain screw in cap. Reps probly have to say something. The best thing for Stihl to do at this point is admit Husqvarna improved their idea and improve their own. The quarter turn would save time if it didn't leak. It also prevents over tightening. If I had one I would work on it myself.

[@francoischretien8808]

Je préfère et de loin les bouchons stihl. Mieux fait, plus simple, plus efficace, plus rapide, beaucoup moins fragile.

[@FishFind3000]

It’s a small sleek cap so there’s nothing to snag on. On the models that it doesn’t matter like the string trimmer, blowers, and tillers it’s the old school cap.

[@antoniomorgado5304]

I Like more the husky! Since the 61's. I have a 1989 61 husky! What a saw no problems since new! And gas leaks? None! The stihl brand have a lot to learn with husqvarna! Air injection? wow my 372xp from 2001 works all day long and on the end of the day the air filter looks like brand new!

[@mikethorntonr1]

You can make a carb have way better throttle response that any fuel injected could imagine that's why your big top fuel dragsters are carbureted

[@shameelali2549]

Both are great saws,I just bought a 500i,I do love husky aswell.

[@Whateva67]

Can you get a prefilter to wrap on the Stihl filter?

[@sturgis97]

So is the 550xp still a good saw. I had thought about going back to a stihl but the two that I owned both were terrible very underpowered compared to the Huskies in the same class and very difficult start even following the manufacturers directions they just continued to flood out once they were warm if you could get it started, it was not an issue. I have never seem to have a problem with any other manufacturer. That said I know tons of people who will only use stihl. my uncle has an older one he has had for years since I was little and it still runs flawless, but I just haven’t had good luck. I’m just curious which brand you prefer to run. It seems like you run stihl more. I don’t need a huge saw I do like something that’s light weight But also very durable my plan is a 50 cc and then something in the 60 to 70 cc range for bigger stuff

[@g.d.7629]

2260 is 4.69HP too small bar mount i have 2 bought when husqvarna phazed them out.

[@rickharper1497]

I'm fixing to buy a 550XP, never been a fan of Stihl, too expensive for my pocket!!

[@robertshoemaker6204]

Stihl as been doing those chain catches on their saws with dual dogs since the 044 in the mid 90s...have used alot of them and many models. Yes like the husqvarna flip caps much better design...Stihl was the first flip caps...husky redesigned made them better... yes big weight different great run down and food for thought. Shoe logger in SW Oregon.

[@Firewoodmaninvirgina]

I like my Stihl saws. I have a 261,361,461,and 661. Definitely going to try out a set of them dogs, do the bark box make a difference on the 261 or 361?

[@cotontop3]

They don’t make a bark box for the 261 because it’s not a 2 piece muffler. It made a big difference on the way the 362 ran.

[@FishFind3000]

@@cotontop3 was the 362 you used a m tronic model with the electric carb?

[@jeffcoulter7181]

I have a Stihl 462 purchase in New Zealand, it came as standard with the twin dogs with the roller chain catcher.

[@sandsock]

Whats your thoughts on m tronic versus husqvarnas version. My 361 sucks fuel , it absolutely screams. The computer adjusting stuff concearns me.

[@owtlawglock]

Great video. After watching this I bought the 572.

[@ToddAdams1234]

Husqvarna is also making something like a 580xp. It hasn’t come out yet either. That’s going to be a closer comparison isn’t it?

[@michaelweatherhead9470]

The black roller on the husky is to keep the saw from tipping over.

[@dcvariousvids8082]

Follow up to my previous comment. The 545XP is back and running well. I did buy a MS500i on a 25”. And have already dealt with a few beech 36-42” dia. and some big ash, sycamore+. The new 500i runs well but there three observations I have that nobody else mentions: •it’s a real pain to start when cold, 6-8 pulls, it runs for 5secs. then cuts out, then it’s another 4 pulls and let it tick-over for 10-20secs. Then and only then will it run smoothly. •it ate a well greased clutch bearing in 3mths. I found the cage race but the needles had disappeared, not one remained. So I’ve now bought a new bearing with three spares. I’m not going to trust one of those bearings past 12wks. Compared to running Aspen, a clutch bearing every 12wks is inexpensive. •the oil filler cap must be wiped or brushed clean every time, before being replaced. That prevents leakage but I still only ever rest the saw on its side. Why oh why can Stihl think their awkward caps, are anything less than a pain in the neck?

[@levigranger5383]

Try ur 500i in winter mode. I have no idea if it will help or not, I haven’t experienced that issue, nore do I know exactly what the winter mode does😂 maybe it has something to do with air flow?

[@AbsolutionArmament]

Make sure to take off the aluminum chain catch behind the cover. Roller style doesn't need that one that came on the saw It's how the 660/661s and 880s are set up.

[@DBlank72]

Good video. I can't wait to see a 261 vs 550xp video. I sold my older 260 and bought a 550xp mark ii after watching your videos.

[@danielking8169]

I’ve run both and to me I’ve always liked the smoothness of the Husqvarna

[@billyword7428]

what do you know about the 90 cc saw coming out from Husqvarna ?

[@lonewolftech]

It’s going to own everything sthil has

[@unclealansyard5176]

I have two Stihls. MS 251 18in and a new MS 362 20in I just did my first ever rebuilt on a Husqvarna 51 with all new OEM cylinder, piston, gaskets, filters and aftermarket farmertec carb. I also have a Husqvarna 45 but it needs rebuilt but I might do that later. I like both brands but lean more towards Stihl. I like the older Husqvarna reminds of my dad old Husqvarnas.

[@dmalloy96]

Great video on everything Tim

[@mountainman9024]

Great video mate! Both great saws used both and both a very nice Husqvarna is a tad smoother . But I like Stihl for my bigger saws and they just work hard day after day and I do find the Stihl computer has a richer mixture of fuel compared to auto tune. I seen auto tune spark plugs and the colour is not dark enough for me. Where as the Stihl is a nice dark brown sparkplug. And I do agree Stihl pulls harder. Keep up the great work mate!

[@fearlyenrage]

Well you could put in more oil

[@Sk3rRR]

I run 500i and 462C-Ms at work and I like the 462 over the 500. The 462 is lighter, and we don't have the problems with overheating and vapor locking that the 500s like to do. I'm looking to get a 572 and 550 for personal use, but we don't have a Husky dealer in the area, so ill probably go the 462/261 route.

[@vzmax]

Why do you need a Husky dealer ? I own a 550 for my personal use, bought on line. I've no dealer near me and I don't care. And if I had a Stihl dealer near me, I'd buy nevertheless a Husky.

[@austindenotter19]

I do run a 572 logging. The saw may be heavier but it feels more ergonomic. It seems closer to your body?

[@tomjones4318]

Even on my Husky 445 the air box stays clean. But think of it this way it's the fines that clog a filter. Never had a Stihl saw yet no idea what gets in.

[@mark5821]

What’s your thoughts on a 462C vs 572xp for firewood with 24 inch bar. I currently use husky but the closest dealer is hour+ away and I have 3 stihl dealers within 20 minutes. I prefer the 462 for weight and dealer support but I hear the 572 is more robust.

[@cotontop3]

Both good saw but the stihl is a lot lighter. Make sure one of the stihl dealers near u has a good mechanic because lots of them basically just sell the saws and that’s pretty much it.