Coyote swap goes in new edge mustang gt !

we finally got the motor and trans on the car and man it looks good. It was a process but we gotta keep pushing forward. Thank you guys for watching and all the support it means the world. Stay tuned for more , God bless.
music: boyfifty

[@Samcrac]

Great work on this. I always admire someone taking a job on like this in their driveway!

[@xJD2Vx]

Samcrac thanks for watching ! And yeah forsure not as easy as using a lift ! Haha but still fun working with my pops

[@BasedNeptune]

Yea bad ass for sure

[@jackdaniels2657]

@@xJD2Vx how come u guys didn't just lower the car into the motor?

[@str8truckin69]

Oh yeah tell your Dad he’s awesome 👏🏼 wish I had one growing up

[@jesseislas2649]

Thank You iv always loved monkeying around with cars iv learned a thing or two during in my time

[@H1GHD3FF]

Keep that same mindset when you have your own.

[@bruhmomento1319]

@@H1GHD3FF big facts, might seem hard to be a dad when uve never had one but u gotta do what u wish he had done for you.. break the cycle

[@trentonbrooks9121]

Just a tip for those that keep saying it’s boring so I didn’t record it, it doesn’t matter if it is your making instructional videos people would like to know what they are doing I would not be happy to have to go to another video to find what I’m looking for so just a friendly piece of advice otherwise it’s a decent vid👌🏽

[@xJD2Vx]

I appreciate the feedback man and I’ll definitely film more info and get as much details as possible 🙏🏼

[@guitarman5051]

Wow!!! I'm 53 years old and you actually taught me something. Great video, keep up the awesome work. And Thanks for sharing.

[@xJD2Vx]

Ahh man I appreciate you watching the video ! Thanks means a lot !

[@clevewilks4312]

I must admit that I'm impressed that your doing everything the old school way!!! When I say that I mean in the garage and backyard builds!!! Thats the way I remember doing it when I was a young kid in the late 80s and early 90s!! Thanks for your content

[@xJD2Vx]

I appreciate it means a lot thanks for watching 🙏🏼

[@loganweisz8948]

Super sick seeing someone actually working with what they got! Can’t wait to see it up and running.

[@xJD2Vx]

Thanks man ! Haha definitely not the easiest thing with no lift but with my dad he made it possible 🙏🏼🤘🏼 thanks for watching stay toon

[@blackdahlia_2v625]

im actually planning on doing a coyote swap to my 2003 gt. glad i found your channel for the help that i will need!

[@kingjerry2143]

You are literally doing the exact plan I had in mind for a new edge!! I love it

[@brunogibson5586]

Thank you for documenting your journey with the swap, can’t wait to see it running! Been planning on doing it to my 96 GT ASAP 🇺🇸🤙🏼

[@xJD2Vx]

Bruno Gibson I appreciate you for watching and I’m sure you’ll love it ! 🙏🏼🤘🏼

[@RBoysMedia]

I had this planned for the next year, wish I seen this sooner. Great job man! Awesome dad and thanks I’ll be referencing this on my swap

[@Janw2406]

So awesome to have the great weather as in SoCal to be able to do this outside!

[@richardseelye9938]

Great great job. Really looks nice. Thanks so much for the blow by blow video. It was fantastic.

[@seeunow44]

Thanks for all the details… great work!! Thanks for sharing….i just got my Motor G2

[@mrmoss149]

Wow. Impressive. Way cool. Really good info. Thanks

[@xJD2Vx]

Mr Moss thanks for the comment and for watching means a lot ! 🙏

[@Shaker1000]

new edges are much lighter so this car will be outstanding!!!

[@xJD2Vx]

I agree man ! Thats what makes this swap even better. Thanks for watching !

[@ptfo_monster_5924]

Glad i found your channel, im about to do this swap in the upcoming months! Good vid my guy

[@xJD2Vx]

Thanks bro ! Really means a lot ! And goodluck with the swap man you’ll love it 🙏🏼🤘🏼

[@magzpony]

Great video, I’m planning on this swap on my 04 Mach 1. Well done!

[@xJD2Vx]

Ahh man thanks for watching I appreciate it ! And sweet bro you’ll love it ! Swapping this car although it’s expensive has been the best decision I ever made for this new edge . Thanks again man 🙏🏼

[@ChrisDavis-sg6cm]

“I gave it a little massage right there” lol Great video, thanks for posting

[@xJD2Vx]

Haha thanks man I really appreciate you for watching ! Means a lot 🙏🏼

[@ChandlerDeansMachine]

Wowwwww man, it's awesome to see it come this far!!! I think it's so cool that you have so many family and friends willing to help you work on the car, that's really something special. Have you thought about doing the 03-04 cobra foglights on your 99-01 front bumper? I did it 2-3 months ago on mine and it makes a world of difference. Can't wait for the next video man!

[@xJD2Vx]

Chandler Dean dude thanks I really appreciate you watching and taking the time to comment. Yeah bro having my dad and uncle and friends is awesome my pops and uncle are really the ones who got me into cars since day one . My dad is a huge huge help he’s the one running the show off camera 🙏🏼 and yeah bro I will upgrade then sooner or later lol

[@bear10bearessenticals26]

Good to see a Father & Son job...well done

[@xJD2Vx]

Bear 10 Bear essenticals thanks man I appreciate you watching and taking time to comment means a lot 🤘🏼🙏🙏

[@bear10bearessenticals26]

All good mate, Gday from Australia

[@brucegoolsbyjr8954]

I just stumbled upon this channel and just subscribed. Great work, I have a 96 cobra that needs a coyote swap haha.

[@xJD2Vx]

Awesome man ! I’m glad you found the channel 🙏 and hopefully one day you can swap it ! I still love the 4.6 though, gave me many great memories! Thanks again man !!

[@dariuswilliams736]

Awwww yeah I can't wait to start my journey on the coyote swap life

[@xchoppaoppx4494]

This is one of my dream cars love the 1999-04 mustangs man so clean and mean

[@xJD2Vx]

Thanks for watching bro ! I appreciate you commenting and showing support 🙏🏼🙏🏼

[@xchoppaoppx4494]

@@xJD2Vx your welcome I dropped a sub immediately I been wanting to see some one 5.0 swap it

[@DanielLopez-ht4ov]

Sweet... that the kinda videos I like to see.. seeing a build from the grave to start up and then the cruises

[@xJD2Vx]

Daniel Lopez thanks for watching man and yeah can’t wait to cruise ! 🙏🏼

[@DanielLopez-ht4ov]

Hey I need to follow you on fbook and IG but yea follow my back too yo!!!

[@clemfandango2749]

Great videos. Been researching a coyote for my fox. I saw your other video where you went over the total cost of 17k. Now I see that's with you doing the labor. That's considerably more expensive than I expected.

[@xJD2Vx]

Yeah man it can be done cheaper but I just wanted everyone done once and be set up for boost 🤘🏼

[@ethanplays8931]

About to do this swap on my white 03 thank you !

[@xJD2Vx]

Yes sir thanks for watching I appreciate it! Goodluck 🙏🏼

[@shadetreeracer3715]

Just what I was looking for about to order some headers for my swap thanks 🙏 they look pretty good

[@xJD2Vx]

Thanks for watching man!

[@RaceGasSmellsGood]

Congrats, man! Car is gonna fly with that Coyote in it! Looking forward to some kill vids! 😎

[@xJD2Vx]

Race Gas Smells Good thanks brotha ! Yeah man can’t wait to rip it and let this yote eat 🥵🤘🏼

[@bowlinglefty]

I've been seeing mostly engine swaps with the car on a lift and lowering the body onto the engine. I see from your video that it can be done with the front of the car jacked up and raise the engine into place. I don't have a lift so this is probably the way I will go. Good video.

[@xJD2Vx]

Thanks man! I appreciate you watching and yeah this was scary at first but after doing it several times it’s easy just bolt up a chain to where the kmember bolts are and jack it up from that chain.

[@trevorellis8472]

I have a 96 GT man and I’ve been debating on saving for a 14’ GT or a 5.0 swap . It would be killer if you did a video on all the parts you bought and prices so you can help people like me out man love that I came across this 🤙🏻

[@xJD2Vx]

Dude thanks for watching ! I appreciate you taking Time to comment . And yes man don’t worry I will make a video on the price range and how to do it as cheap as possible yet still the right way no cutting corners . Video will be coming soon just wanting to wrap up the car 100% before I mention prices or parts 🤘🏼

[@MoneyMadeT33]

Same I got a 96 too but it’s just a v6 im trying to do a coyote swap but idk it already has 207k miles but still runs like a champ

[@lowboostedaccord4933]

Engine looks good in the car keep it up brotha

[@HOLDitIN2]

super hyped for you man, just seeing the yote in there is dope af!!!!! keep up the good work homie.

[@xJD2Vx]

StormTrooperSN95 thanks for watching man I appreciate you 🙏🏼🙏🏼🤘🏼

[@HOLDitIN2]

JD2v dude no problem at all man, it’s given me more motivation to post more on my page and finish my build.

[@Mpreston89]

Hell yeah man good stuff!

[@xJD2Vx]

Thanks bro I appreciate you watching man means a lot 🙏🏼

[@Mpreston89]

@@xJD2Vx definitely will continue to do so! Stay safe man!

[@ryanreeves2529]

Sweet ass job by the way I getting ready to to my swP so that computer Instructions picture steps you are following make it look alot easier to understand

[@angelamavizca7642]

that's what's up my boy I love the videos can't wait to see it when she's done

[@xJD2Vx]

Angel Amavizca hell yeah thanks bro I appreciate the good vibes and thanks for watching ! 🙏🏼🙏🏼

[@onlycodered]

Exciting build! Would love to do this to my ‘01 some day.

[@xJD2Vx]

Jared Schwager thanks for watching man ! And dude sky’s the limit I remember when I used to dream and wish about this 😭🤘🏼

[@onlycodered]

JD2v You forgot the part where you need disposable income. 🤣

[@itspk4209]

Your videos remind me of my dad and I rolling around the driveway under our cars lol

[@manilopez2779]

awesome video man!

[@xJD2Vx]

thanks man I took my time with this one ! I appreciate you watching!!

[@Marshall_Garage]

My dream car in a nutshell hahahaha A new edge with the coyote, man, thats all i"ve ever dream

[@franky2473]

Dope brotha nice job 👍

[@xJD2Vx]

Thanks man I appreciate you🙏🏼🙏🏼

[@ruthlessaj_]

This build gonna go crazy homie

[@xJD2Vx]

RuthlessAj hopefully bro but we getting closer 🙏🏼🤘🏼🤘🏼

[@ronaldwilliams4053]

Very bad ass motor

[@xJD2Vx]

Thanks man I appreciate you watching 🙏🏼

[@brandondonaldson9726]

Bro keep it up man!

[@xJD2Vx]

Brandon Donaldson thanks man !! 🙏🏼

[@jesusfigueroa198]

It looks so dope👍

[@xJD2Vx]

Jesus Figueroa I appreciate it dude ! Thanks for the support 🙏🏼🤘🏼🤘🏼

[@2v2loudmac77]

I Can’t Wait Till I Do My Coyote Swap🙏🏾💪🏾 Great Video

[@xJD2Vx]

2V2Loud Mac thanks for watching man ! And yezzir your gonna love it . I love the build and that’s cause I haven’t even turned it in yet lol

[@2v2loudmac77]

JD2v 🙏🏾💪🏾 yes sir...can you check out my channel like comment and subscribe bro

[@sela562jig]

Sick you're able to do the work yourself. I would have paid to have it done. My lazy ass 😂😂 nice work..

[@xJD2Vx]

Haha yeah man it’s understandable haha . This is a lot of work . Thanks for watching bro 🙏🏼

[@Westhelockpicker]

You got my respect bro

[@crawdaddy019]

Great work! Looks awesome

[@xJD2Vx]

Ahh thanks man I appreciate your time to comment and for watching !

[@crawdaddy019]

@@xJD2Vx jus subbed

[@xJD2Vx]

@@crawdaddy019 sweet man !!!

[@ronin2167]

I really like your videos. These things show the issues people will run into when doing something similar and how to avoid them ahead of time. Parts needed and where to get them too! I'd like to get a 2001 Bullitt and put a Cobra front and rear facia and hood on it and do this. Why did you go with an Gen 2 vs a Gen 3 Coyote engine? Is there any differences do you know?

[@modularperformanceracing1799]

Great video ☑️

[@xJD2Vx]

Thank you for watching I appreciate it 🙏🏼

[@aboudonline]

Great work

[@xJD2Vx]

thanks for watching I appreciate the comment also !

[@RBoysMedia]

The dent next the header cracks me up lmao

[@xJD2Vx]

😂😂

[@thenumber1bobo]

good job man

[@xJD2Vx]

Thanks you ! I appreciate you viewing the video 🙏🏼

[@chrisharlander6529]

I’m kinda partial to my Taurus Raging Judge Magnum, the BIG 6 shot brother to the Judge. It not only handles the 45LC and the 3” 410, it also handles the venerable 454 Casull. Yes it’s heavy as FUCK but that just gives you the advantage of carrying a club when I run out of ammo. Another selling point is, if you can’t own it in California, it’s got to be a great pistol.

[@cashdagoer]

of. course it does

[@jamesp9998]

Great job

[@xJD2Vx]

Thanks man ! I appreciate you commenting and watching 🙏🏼

[@bengordon7635]

bbk are not bolt friendly ,,,,, I got the shorty headers for a turbo and my god some of the bolts you can barely get in the header I had to use stock and bbk bolts , after market bolts its crazy and some have to be put in before installing the header or you will never get the bolt in hahaha then the doughnut exhaust bolts can hit the header you have to be careful what size you use but what an improvement ,, the bbks sound incredible once you get them in

[@renemichel5855]

Great man! But what about de cluster? Is it work whit coyote swap?

[@Moralesaaron94]

New sub here! Awesome work man! Can't wait to see the finished product. Are you keeping the stock/ upgraded rear end or you going to cobra irs?

[@xJD2Vx]

Voodoo315 thanks for watching man it means a lot !!! And yeah bro gonna stick with the stock 8.8 rear end and eventually slowly upgrade it . Probably get some badass axles later . But thanks again bro 🙏🏼🙏🏼

[@Moralesaaron94]

@@xJD2Vx np! Keep doing what you doing !

[@ThaSilentOne420]

converting a V6 going to need more then motor and trans . rearend trans suspension breaks

[@DeltaforceGaming01]

Finally got my coyote bro and was just wonder for the cooling system and brakes are you running the stock 2v ones?

[@teelazy2957]

On a scale of 1-10 how difficult would you rate this project? I also got a big grin when I seen the engine in the bay! It's like the yote was meant to come in these cars from the factory! 😂 But im happy for you bro. Looking forward to more content! 💯

[@xJD2Vx]

R10 Nine thanks man and me too I couldn’t believe it when we put it 😭 and tbh man it’s definitely a tricky install gotta have the right tools and patient and ig some mechanical knowledge. I’m lucky for my dad but if it wasn’t for him there’s no way I think I’d be able to do it so it’s got it’s difficulties forsure but doable ! 🙏🏼🙏🏼

[@yobur6699]

Definitely a dream to coyote swap an engine into a new edge :’) one day☝🏽

[@xJD2Vx]

You can bro ! I was just like you just be patient and get a part at a time ! Thanks for watching man 🙏🏼🙏🏼

[@octane2099]

This is a really tight fit

[@xJD2Vx]

Haha yeah but somehow works 😂🙏🏼

[@Travissantos]

Where did you get the motor and transmission? Great vid! Thank you

[@xJD2Vx]

Transmission was from a junk yard in Houston and the transmission came from the parts farm! Thanks for watching man 🙏🏼🙏🏼

[@chrisosteen4162]

I'm working on my 96 Cobra Gen 2 swap. I was thinking I'd put the engine and trans in the K member then get 4 or 5 strong buddies to help lift the front of the car up and onto the drivetrain thats sitting closer to the ground. Put the 4 main k member bolts then jack it up on stands and keep going. Any suggestions on the easiest approach would be appreciated. Thanks!

[@jesseislas2649]

A note being that everything that you will be doing is not supposed to be there there will be a lot of carful movements so I would advise having some kind of hydrologic suspension to suspend the car while you are mocking everything up not sure if your buddies can handle the lifting and holding while you adjust your build we used cherry picker apron fender engine support jackstands and floor jacks

[@isaactorres3488]

🔥🔥🔥

[@xJD2Vx]

Thanks bro 🙏🏼

[@andrewverrett568]

I literally never see new edges anymore. All I see is s197 older styles like 05 to 10 or 5.0 or some new 5.0s. Never ever see and new edges, ever. So that's why I decided to coyote swap the new edge mach 1 I ordered.

[@seeunow44]

Since the swap, are there any updates, problems, or anything you would do differently?

[@jaronclark1365]

those flywheels with removable friction pads should never be resurfaced. they have replacement pads for a reason. no hate just facts.. great video!

[@jesseislas2649]

Couldn't find one for stock Ford cobra my friend tried looking for one for his as well nothing so that was the alternative and it worked so that I know they do not service replacement clutch rings for the ford cobra stock flywheel that I know of and I have a terminator as well

[@ryanreeves2529]

I noticed you were following a picture step by step directions where did u get that info

[@thomgomez2799]

👏👏👏

[@xJD2Vx]

Thanks 🙏🏼😭

[@andreszavala386]

haha the massage

[@xJD2Vx]

Haha aka hit tf out of it 😂

[@pascualbp]

Badass man i cant wait to coyote swap my 93 foxbody

[@xJD2Vx]

Thanks for watching ! I hope you swap it soon you’ll love it !🤘🏼

[@pascualbp]

@@xJD2Vx its gonna be a while, i have to wait for my s550 to break first 😂

[@keithlongstreath8066]

its been a while since this vid, but id be worried about there not being enough threads sticking out of the motor mount bolts,

[@jesseislas2649]

Thanks for commenting two years now all sorts of hard pulls and dynos and racing and still no problems 👍thank you for watching and supporting

[@tylerstill5203]

Did you have to use k member spacers with the UPR k member and bbk headers to fit? Or just motor mount shims? Thanks

[@jesseislas2649]

Motor mounts are enough to clear sway bar and the top should fit if you have a cowl hood we wanted stock hood so we use the k member shims as well thanks for commenting

[@austinharrison2453]

Bro luv the shirt...you have merch???

[@xJD2Vx]

Not yet man. Trust me I have a major brand and shirts on the back burner soon enough merch will be available in the near future. I just want to make sure its 100% before I announce it. But dude thank you so much for commenting and showing interest in merch and the channel !

[@ryanreeves2529]

Or did you have to get the engine harness separately

[@909cobra]

you should of did the rear main seal since it was out.

[@bartz118]

Any updates? Ever think about getting a different oil pan that clears the k memeber instead of the spacers? Looks like removing the 3/8ths spacers might help with hood clearance and header collector clearance. But perhaps it would cause other issues.

[@xJD2Vx]

bartz118 your 100% right man . I would like the oil pan it’s just that I didn’t want to spend the 300+ $$ on it lol in the future I will get a aftermarket one and remove the spacers . And right now I’m editing the next video , but fuel system is on only thing left is to button everything up and install the control pack !

[@xJD2Vx]

bartz118 I appreciate you watching and putting your 2 cents . Thanks again bro !

[@BoostedMarcelo]

Hope you used OEM header gaskets because a lot of aftermarket ones start to leak

[@xJD2Vx]

Yes sir used the oem gaskets thanks for the tip and for watching 🤘🏼

[@jbarba7314]

Like the content !!! NEW SUBSCRIBER !!

[@xJD2Vx]

Sweet thanks man ! I appreciate you subscribing 🤘🏼

[@jbarba7314]

@@xJD2Vx yeah man I went back and I’m watching all your content from day one ☝🏿

[@adamgarrett1875]

On the swop i all ready have a BBK xpipe from the exhaust manifold back. If i wanted to keep that would i have to get a pair of the short headers? and would that take away any horsepower?

[@xJD2Vx]

Yeah I recommend just getting the long tube headers but you might need to have a muffler shop fabricate some stuff if you want to keep short headers

[@DrBIeed]

I’d be interested to see what the 5.0 runs without any work in a new edge as a benchmark compared to a stock Terminator.

[@xJD2Vx]

It be a close one I think 🤔 but these coyotes with full bolt ons are insane 🤘🤯

[@anmolvirk2907]

Hi i have 2000 mustang gt very clean only 93k. Km. No rust. And my brothers 2018 f150 5.0. Got totaled from back side so i am planning to swap my 2v. Can someone tell me that can i swap whole drivetrain include trans and motor. And what else can i take out from f150 which will fit in 2v?

[@cloudrhezii]

What does the performance swap accessories bracket for ??

[@Guenter34]

Keep us updated. I've been toying around with this idea, but wasn't sure how possible it was. I'd love to know how it's going for you so far.

[@xJD2Vx]

Thanks for watching man I appreciate it! I got two vids I’ve posted after this one . Installed the fuel system and wiring for the whole swap. Next video will be out soon probably posted on Sunday or sooner. Thanks again man 🙏🏼

[@thynysan]

Does anyone know how hard it would be to do a Coyote/V6 New Edge swap?

[@imfanzz1]

Just subbed! How much was the PBH engine harness swap?

[@xJD2Vx]

Bornsinner17 thanks man ! And the control pack from power by the hour I think was 1,700 + or so 😬

[@imfanzz1]

JD2v sheesh! Lol looking forward for your next vids. I have a 3v and want to start the process of swapping it when I graduate college which is in a year and a half 👌🏼

[@xJD2Vx]

Bornsinner17 awesome bro you won’t regret it I’m already super hyped and not even finished 😂🤘🏼

[@willygt2379]

nice

[@xJD2Vx]

wily zote thanks man I appreciate you watching 🤘🏼🤘🏼

[@victorrendon427]

Fuckin badass bro!!! Do you need some sort of coyote to new edge converter for the wiring harness?

[@downhilldaddy9346]

Making the new edge great again. Aluminum flywheel doesn’t mean more horsepower. It’ll rev faster

[@xJD2Vx]

That’s the plan man . Just trying to show how great the new edge mustangs are . And thanks for clearing that up man I should’ve spoken differently haha but thanks for watching 🙏🏼

[@jaquan1313ful]

Honestly, now I feel like I can do it myself thought it would be difficult but you put answers in my lap! If you don’t mind can you get an average pricing range of you entire swap setup bro?

[@xJD2Vx]

Glad to hear that man . Yeah the swap is pretty time consuming and does require so many tools, but it can be done . I mean me and my dad have done it here outside with no lift on jack stands lol . Not even a actual garage . So I’m in 17k but I bought a lot of goodies that aren’t necessary. Swap can be done way cheaper but your looking around 10k +

[@jaquan1313ful]

That’s how I do my work, the same exact way keep it up bro

[@xJD2Vx]

@@jaquan1313ful yes sir thank you . And I’m kinda glad we did it on jack stands really puts in perspective hard work and just staying humble . Yes the fancy lifts are more convenient but glad I’m learning the basics of all this haha

[@darkhorse9542]

@JD2v I’m doing almost same coyote swap as you are now I’m also running a t56 transmission and spec stage 3+ clutch but what bell housing did you use I know the stoc bell housing doesn’t fit I just bought a quick time bell housing for my gen1 coyote swap in my 2000 Mustang gt

[@xJD2Vx]

Hey man first off thanks for watching means a lot ! And I appreciate you commenting. The t56 I used is from a 03-04 cobra terminator. It bolts right up so the stock cobra t56 bell housing will work! How ever if you get the magnum t56 you will need a QuickTime bell housing. QuickTime bell housing should also work with the cobra t56.

[@ALPHA-AG-yi3mg]

I hear you can swap to a carb engine or another fuel injected Motor So ive heard you have to re wire the dash ? I never have understood that

[@southernracing2468]

It’s easy you just leave the fuse box run one power wire to it and the whole inside will have power. You can put a lot of different motors small block and big block chevys fit, ls motors fit. Small block fords late model ford engines etc.

[@damoncrowfeather4655]

11:25.. I'd leave those V6 badges on..

[@sphifex5678]

wa it a 2v or v6 originally?

[@raptor9926]

Hey buddy what’s the total costs on that coyote swap? Bad ass ride by the way✊✌️

[@xJD2Vx]

So far 17k man it can be done for cheaper but I bought a lot of extras haha . And thank you man I appreciate you watching and taking time to comment 🙏🏼

[@bernardobarajas5570]

Cool swap man gonna be sick, what are you gonna use for the wiring ?

[@xJD2Vx]

Bernardo Barajas thanks for watching man and gonna use the Ford control pack I purchased from power by the hour . Thanks again ! 🤘🙏

[@bernardobarajas5570]

JD2v gonna use stock fuel system ? I’m gonna do a swap soon lol but into a f150 and I’m not sure what I’m gonna do about that lol

[@xJD2Vx]

Bernardo Barajas I went the expensive route lol I purchased lethal performance coyote swap fuel system for 99-04 mustang gt and I upgraded the pumps to 465s 🙏

[@bernardobarajas5570]

JD2v nice goodluck keep us posted lol

[@justda2v650]

Random question how much were you making with the truck flow setup cause I have a bullitt/gt and wondering what fbo with this intake makes

[@xJD2Vx]

Justda2v never got it dynod but I’ve heard people say the Bullitt intake makes more torque . Thanks for watching bro and I appreciate the question 🤘🏼🤙🏼