COYOTE SWAP cost breakdown new edge mustang

[@Vffr1]

This is how people end up making a lot of money and working for yourself and staying happy. Bravo! Triple

[@davidestrada7337]

bad ass ! no one would expect that thing to move i would consider it a sleeper ! had a few new edges GTs and 1 99 cobra they were fun cars have my 19 Mustang GT pp1 orange fury for four years those cayotes really move

[@mikespratt8350]

That's a good clean install for your first time. Good job.

[@mustangnotch]

Nicley done! Picked up another subscriber. Will be watching. I have a 2011 Kona Blue GT and a True Blue 2003. My wheels are now turning.

[@jessetime1329]

Bro this is so sick I plan on doing the same on mine 🔥

[@benrobinson9136]

Chrome boys on the new edge lets see em

[@TH3D4RKKNIGHT]

Definitely cheaper to rebuild my new edge and Coyote swap than buying a new Mustang. 😂

[@Coops1996]

Hell yea dude so proud of you 🫡💯

[@smithgilbert28]

Fuck yea man.

[@bengordon7635]

should have waited ,, prices are dropping everywhere like a rock this is the time to buy ,, on facebook market place seen a 2011 mustang gt for $4800 ,, Just bought a Audi rs5 400plus horse power for 6k just needed clutch and brake sensors that locked the car from starting , replaced sensors had the computer cleared and a new car that would smoke a coyote , there are so many sleepers out there with over 400 hp cheap and like new

[@sailorlucile5001]

Really good information man! Thank you so much 👏🤝

[@BrockMcDowell]

Great vid buddy

[@Mach1Dillon]

I’m eventually going to do this to my 03 Mach 1. Once I blow the motor on that car again im done with the 4.6.

[@mikehall737]

So happens i got a 98 mustang and was planning in a coyote swap, thanks for the fuel system info

[@jbnnm657]

Good job bud

[@dogman9501]

Just needs a positive displacement supercharger

[@jesusramos-my2qr]

This video gonna end up in everyone's recommended like mine this is a relatively uniwue build

[@grfilmz8363]

W build

[@curtisgore1611]

Great job great video

[@fordracing5oh]

I live in Waco Texas bro. I got a coyote swap new edge as well. 😮

[@Hornsgarage23]

That’s what’s up! Crazy how popular the swap is

[@caylemsepeda4845]

How much would you charge me I'm in West Texas

[@12luv365]

Great job bro! Iam thinking of putting a coyote in my 81 tbird

[@238dad]

On the steering shaft, how did you get it through the headers? Can you set the car down on the motor and then route the connection or does that have to be done at the same time your setting it?

[@Hornsgarage23]

You have to run the steering shaft through the headers in the process of setting the car down. You can not do it after you set the car down

[@davidsanders263]

You rebuilt the entire engine for $1K? Crank, rods, pistons, etc?

[@nicjames8757]

I dont think he was right on that. new pistons alone would be about $800 and the cranks are maybe $500. so unless he got everything used from junkyards, idk if i believe it

[@nickrager5583]

I'm really considering this instead of going for NA 4.6 power with my 98 cobra

[@youtubeuser5424]

Nice, what year vet is the fuel filter out of? did you make all your fuel lines or did you buy pre-fabricated ones?

[@Hornsgarage23]

For the fuel lines, the feed line on the car is one solid line on the 2003 so I was able to add the regular (fuel filter) before the factory line so I only had build lines for the feed from the pump and return to tank, I used steel braided fuel line for those, on the engine side I came off the original line to the engine with steel braided line and quick connect fittings, the filter was for a 94 corvette

[@renemichel5855]

how they made the cluster connection to the coyote swap ?

[@nicomata9035]

i have a 99 mustang 4.6 would it work on it too? i have the engine thinking about doing and its automatic too so idk if i need to also get a tranmisiion or only works for manual?

[@noahalbrooks8188]

Hey man I have the exact same swap wondering if u ran into fitment problems with alternator or did it just go right on

[@Hornsgarage23]

I had to buy a 2015 mustang alternator, bolted right up with the pbh bracket kit.

[@mannyjonesjr7698]

Nice car, was it hard to get the ac running with the swap?

[@firstmic7664]

Nice job. How much was the total investment?

[@jacobdominguez5219]

still kinda sounds like a 2v 😳 clean swap bro

[@Hornsgarage23]

I kind of thought the same thing, maybe I will switch up the exhaust soon

[@grfilmz8363]

@@Hornsgarage23I agree it sounds like a 2v still but I like it, a little sleeper

[@jojogun1957]

@@grfilmz8363 Once you hit 6,000 rpm's I think you'll here the difference.lol

[@Carnage_5.0]

How'd you do the hoses for the heater core

[@LeachimSagrav333]

What was the total spent? Was considering on taking mine to texas speed lab.

[@Carnage_5.0]

Did you change the cams to the Mustang ones

[@jamaalcroom9938]

what oil pan you use?

[@briangibbons2439]

No hate but a tubular k member and control arms for these vehicles will run you far less than $1500 I just got mine for $350

[@Hornsgarage23]

Yeah I was wanting the upgraded oil pump / pickup so it ended up working out, may do a tubular in the future!

[@jamaalcroom9938]

What oil pan did you swap to?

[@kaseychristaw7062]

Were Did You Get The Rebuild Kit?

[@josephmartin6060]

How much you charge build one I have Mach 1 04 I want swap

[@smarmysmoove7731]

so about 10k for the swap?

[@disguisedpickle1360]

There’s a coyote swap return style fuel system for like $600-800 not sure why your swapping lines fuel lines out but piecing a vette filter with a 98 mustang fuel pump also the oil pan is around the same price as the qa1 k member your cutting unnecessary corners friend

[@Carnage_5.0]

Any links to these things we would need

[@Hornsgarage23]

Most all the parts were bought through pbh. The control pack comes with just about everything.

[@ericvasquez2822]

Nice build, can we get a quarter mile time 😀

[@josephmartin6060]

I stay in Houston can you build my new edge g

[@smithgilbert28]

Doing this in about a year or so

[@DoctorRickSanchez]

_Why wait?_

[@markrogers7304]

That coyote sounded just like my 04 mach but im running high flow cats,h pipe and flowmaster super 44's. If my motor ever goes this is the way im going.