CPM S45VN Who Does It Better? CRK VS SPYDERCO

[@franka9760]

I just got my Endela in K390 today. Thanks for the ref. Also got an Opinel No. 8 in carbon steel. Two folding knives could not be more different, 19th century tech versus 21st century!

[@toddgdfznh1526]

spyderco s45vn is one of my all time favorite user knives. I love this thing, when it comes to a working knife, its the 1st thing in my pocket. also you make great videos!

[@ericasedc]

Thank you so much!

[@jimfrohlich2462]

I don’t know if you’ve already touched on the subject. But, if you haven’t do you mind doing a video on what blade angles you use when sharpening with the different task you do at work ( cutting boxes… ext) and in your option what angles hold up the most. Thanks! Love your content 👍👍

[@ericasedc]

Already did that. I use 15 DPS for most of my knives!

[@jimfrohlich2462]

@@ericasedc thank you!

[@thedeaderer8791]

Have been watching ur channel for a while. I'm surprised ur channel isn't way bigger u do a great job

[@dewet2wet]

I definitely agree with your s45vn assessment. I love the way it sharpens. Gives me Spy-27 vibes on the stone. Will go ultrafine high polish or coarser 600-800ish grit and it does great on both. I found that the Spyderco tends to...*puts on i'm-full-o-crap cap* get/stay toothier as you use it when compared to Chris Reeves? which tends to degrade pretty linearly? I mean we're splitting hairs and I could really be talking out of my ass. But it's just what I felt after sharpening them using the same progression. Such a great steel that you can throw in your pocket everyday and use with zero fuss. My para 3 s45vn only being kicked out of primary duty by my new Rex-45 Native that John reground for me! Got it back from him Saturday and it hasn't left my side.

[@ericasedc]

You make PERFECT SENSE!

[@chimchu3232]

Love my spyderco s45vn. My favorite all around knife steel, easy to sharpen, tough enough to hold up with most use, and holds an edge longer than budget steel

[@snowtiger44]

Are the light spots on your Sweater wear and tear or is it just the pattern it looks cool 🙂👍 i go use my wenger tomorrow again for my rocking chair paint removal project 😊

[@ericasedc]

Bleach!!!😂❤

[@ToRo909r]

“Use your shit” I needed that 😂

[@jimwvisi]

Hey Erica, off topic but are you guys now able to stay in your trailers? Hope all is well with your residence situation!

[@ericasedc]

No we are not. The town is investigating yet again and trying to push us out. Thanks for watching!

[@Adude89]

Do you think you could do a video on how to sharpen the 940? Love the videos

[@ericasedc]

YES

[@Knife_guy]

Was that Para 3 an exclusive or stock? I know Spyderco recently upgraded the Para 3 and Paramilitary 2 to S45VN.

[@ericasedc]

Just stock!!!😊

[@iLLBuddy]

Hey pal, what grit do you run on your Sebenza in S45? ❤

[@partrickstowman8039]

Love your chats! Be well

[@marcelpfeiffer6587]

think it's a lot about blade geometry, thanks for the comparison.

[@ericasedc]

Cheers!

[@baileymoto]

Still very much enjoying your content. Plz keep at it. 👌

[@DanielChzBurger7]

Personally my experience with hollow ground knives, the cut more smoothly/ efficiently through materials like cardboard, than flat ground blades

[@nicoledodge7240]

Awesome comparison, and Romi is so damn cute!! 🥰

[@ericasedc]

Perfect baby!

[@mikep.9371]

Best comparison ever. It's the brave that can change an opinion based on time, new observations, and design. Ended up with three to four inches of snow from Tuesday. Throwing balls is not a distraction here. Take care as always.

[@ericasedc]

Take care M!!!!❤

[@dualsportoutdoors]

My favorite S45VN blade is my Spartan Harsey. It's like a perfect combo of being tough as hell but also holding a great edge for a long time and thanks to the Harsey's blade style, it cuts beautifully as well

[@ericasedc]

Hell yeaaaah!

[@dualsportoutdoors]

@@ericasedc the Harsey is quickly becoming my favorite knife out of all the knives I own

[@charlesholland6851]

I love my 3 Harsey knives by Spartan

[@deanP.]

My Emerson A-100 came in today. Thank you for the recommendation. I didn't even know about Emerson until I saw your videos on it. You are right. My A-100 is super smooth and very sharp. I was a little concerned about the chisel grind from other reviews but it is really sharp and cuts like crazy. Mine doesn't even have lock stick like I have seen on some reviews. It is absolutely fabulous and now my favorite knife. I trusted your opinion over others and I'm glad I did. Thanks so much. This is a great video as well even though my comment is about the Emerson 😂

[@ericasedc]

That is great news!!!!

[@rob10ring]

This is great and really not a comparison, just like you noted. A great all around steel for most users. I have a Para 3, that is probably my most used work knife. It is not the coated blade and Spyderco has put the most glassy stonewash I’ve ever seen on it. Not something they did on previous versions. Love that thing!

[@ericasedc]

Thanks for watching!

[@bearlynormalwetshaver1894]

I'm presently comparing 2 used PM2's. One k390 the other s45vn. From the limited research I can find, it looks like k390 & s45vn retain & strops back very well. As for toughness they also seem comparable. Does that sound right to you? Aside from corrosion resistence these two seem similar if heat treat is on point. Would U agree?

[@ericasedc]

Hahaha no. K390 blows S45 out if the water!

[@bearlynormalwetshaver1894]

@@ericasedcWow Thx Miss E.. So many graphs and charts but no two referenced info in the same way which made it confusing for me. I'm definetly not a metallurgist. BTW, still 🙏 ing 4 ur brother.

[@ericasedc]

@@bearlynormalwetshaver1894 thank you!

[@LarryGanz]

@3:14 LOL I said the same thing about cardboard on your comments 12 hours ago for a different video :)

[@ericasedc]

Cheers!

[@nickmartino2839]

So I have a para 3 and Malibu both in s45vn.... which I absolutely love both btw!!!... lol but speaking on a strictly performance level tho the Malibu is a no questions better feeling knife in hand!! In almost every way conceivable......... but the pm3 seems to do a 1000% better time when it comes to actually getting and being used!!!!and stropping back to.......and that HAS to be blade geometry right? And 2 different companies using the " same "steel is still going to yield diff results cuz they both have much different protocols in place.. but with them both being the same s45vn I look at them just like that.... but the Malibu will never compete with actual day to day cutting jobs!!!!!!! Tho now I'm thinking a hollow regrind on my Malibu is looking really great at this point lol........

[@ericasedc]

Hey brotha! Thanks for chiming in! Cheers!

[@Wild_Bill_RC]

I’m just here for the Mom jokes 😊. What up E 👊🏻👊🏻👊🏻🤙🏻

[@ericasedc]

Eyyy heck yes!!!

[@kid5Media]

I'm here for the dogs.

[@Wild_Bill_RC]

@@kid5Media I’m done with dogs. Just lost one. It’s like having another kid, and I got enough of those. 😁👊🏻

[@NedKnives]

Cool video! Steels are task dependent I suppose😅 Have a good one!

[@ericasedc]

Thanks for watching! I agree. You too!!!

[@nwjavahead]

This was a very good video. Different brands/tiers but both I love.

[@ericasedc]

Cheers to that!

[@Veesaki]

Love it ! 🤗

[@57HEMIviken]

Thank you again for pushing me to actually use my shit and learn to free hand sharpen. Since laying back the angle on my 940-2 i have absolutely fallen in love with it. I was totally digging on the bugout till i rolled the edge cutting some (i thought light duty) tubing. Not a problem with the 940 lol. Still carry both but the 940 is my main user.

[@ericasedc]

Dude a 940 with a 15DPS edge is the BALLS

[@JohnnyQ714]

Well put!! 🇺🇸🔪🤘🏼🍺😁

[@ericasedc]

Thank you brother!

[@pauljosephbuggle3722]

Fair enough, but I don't like framelocks, nor especially compression locks. It's the leftie in me. I have a greyhound, that's my kind of dog. People have different ways of looking at things.

[@ericasedc]

Cheers to that!!

[@paulthelefty]

This fellow lefty agrees about framelocks and compression locks, which is why I have a new lefty PM2 coming my way!

[@TheSogGrunt]

Great video 😊🔪👍

[@JCpNK]

You started off the video by saying the blade shapes and designs are different so I feel like you hit the nail on the head

[@ericasedc]

Thanks!

[@nickmartino2839]

I'm just here for the overload of roamy cuteness!!!!!!! Lol

[@ericasedc]

Isn’t she precious?!