Cracked Dash? Dash Replacement on 2007-2013 Silverado or GMC Sierra

Ep:10
Do you have a Cracked or broken dash? In this video we do a step by step on how to replace the dash board on a 2008 Silverado. The process is the same from 2008-2013 Silverado and GMC Sierra. If you have any questions feel free to leave a comment. As always, thank you for watching and hope this helped. Please click the Subscribe button to help our channel grow. Thank you for watching and i hope we were able to help.
If you would like to help support the channel you can do so by using the "Super Thanks" here on KZbin or via Paypal or Cashapp.
Paypal: [e-mail]
Cashapp: $perezjet
Thank you in advance!

[@vky350]

Congratulations, out of the hundreds of KZbin instructional videos I've watched over the years, this is the most informative of them all. Thank you for taking the time and doing it right.

[@EddiesCustomsandRestorations]

Feels very nice to read a comment like this. Thank you very much for sharing your thoughts, it is greatly appreciated. Putting this video together took so much time...

[@ralphgertson2765]

Was confident enough after watching the video and replaced my dash. Would never have attemped to do this without this video. GREAT JOB GUYS!!!

[@EddiesCustomsandRestorations]

Well im very glad the video was useful to you! Thank you for your positive feedback!

[@nealgaunt2385]

Nice job on the technical side of it still looks like a lot but nice job

[@tjn2254]

Where did you get replacement dash I can only find slip on covers

[@stephensivley7205]

Can you please tell me where you purchased your new replacement dash?

[@everhernandez8658]

Where did you buy the dashvoard?

[@shadowwarrior23]

Awesome video. You have convinced me that me cracked dash on my 2008 Sierra really doesn't need to be replaced that bad. I have a greater appreciation for the cost charged by mechanics now. I would have never imagined this would be such an involved process.

[@EddiesCustomsandRestorations]

Haha yes it sure is a long process to replace and we do a lot of work that sometimes people don't understand how much time goes into it like you said..

[@MegaSmooth13]

Lol same here I rather just pay

[@jokaah7337]

I think I might just put carpeting on top of my dash, this is way too much work for me

[@michaellankford8358]

My windshield also needs replacing...wonder if dash replacement would be easier without windshield in the way

[@Joel101R]

OMG! Thank you guys! Not many people take the time to explain how the clips work. Anyone who hasn't worked on cars too much, don't know how a lot of them work. I've broken a few over the years. :)

[@EddiesCustomsandRestorations]

Youre very welcome. And my father says the same thing about the clips which is why I take the time to explain everything as best I can. Im sure glad It helped! :)

[@edhavnfun]

You guys are very very good at giving the exact procedure. It is a fantastic video and gave me the inspiration to do it to my 209 GMC. Dash is wrecked from previous owners after market sound system. Thank you an I loved the Rooster crowing during the video. Thanks again.

[@EddiesCustomsandRestorations]

@@edhavnfun very grateful 🙏 with your kind feedback about our video. Means a lot and im glad the video was useful for you. Thanks again!

[@Newokie59]

Absolutely one of the best DIY auto repair videos I've ever watched. You covered all the bases and gave solid helpful advice and explanations.

[@EddiesCustomsandRestorations]

Really appreciate your comment🙏sure was a lot of work doing this video. hope we just earned ourselves another subscriber lol .

[@Newokie59]

@@EddiesCustomsandRestorations You have!

[@jake-sy7cc]

Earned another subscriber here aswell and maybe a customer you guys in Arizona?

[@replay8134]

I agree - dudes nice..

[@georgekennedy5561]

@@EddiesCustomsandRestorations ok thanks

[@dubaidubaiable]

I came here hoping that this would be an easy DIY process. I'm at 12:16 and I've already given up on the idea of doing it myself. I have great appreciation for whoever is going to go through this to replace my dash. lol

[@EddiesCustomsandRestorations]

Lol yea its quite the process!

[@fredmertz8538]

I gave up after 8:26

[@EddiesCustomsandRestorations]

@@fredmertz8538 lol yea its a pretty long process

[@keke177]

So glad i found this video. Removed my dash, but it got dark on me. I'll do my installation tomorrow. Excellent video. Thank you so much!!

[@EddiesCustomsandRestorations]

You're very welcome 🙏

[@seeingisbelieving6355]

This is probably the best DIY video on KZbin. Although you got this out of a crashed truck, maybe you could add a link to where we could find one. THAT would be going the extra mile. You guys make great videos.

[@flyingturtle2499]

best place to find used parts for my rebuilding is typically car-part.com and ebay.

[@flyingturtle2499]

car-part is essentially a search engine listing for multiple salvage yards. Very easy to search.

[@chaddouglas2136]

We got ours from GM. But I have seen them for sale online.

[@drabell88]

Nice video. Get under the replacement dash before install and take some epoxy and scrap plastic and gusset/reinforce common areas that crack before install, watching for areas that may be tight tolerance and prevent a good fit. May help prevent cracking in the future.

[@jasonharper2884]

This is why I love GM the simplicity of working on them is about the best and you can't beat and LS motor.

[@datriggr8287]

Watching this, I'm now a little more intimately familiar with my 13 Silverado 1500. Excellent video! It does give me an appreciation for how much work goes into this.

[@EddiesCustomsandRestorations]

Haha that first sentence got me laughing! But thank you, yes it is a pretty involved project.

[@roychavez9676]

Thanks for the informative video. Was able to replace my dash in my driveway. Saved tons of money by not taking it to the mechanic. Keep up the great vids guys.

[@EddiesCustomsandRestorations]

Very glad my video helped you! And congrats on your new dash!

[@stevehenderson2571]

I’m not capable of doing this myself but understand the complex procedure with your very informative explanation & video. Job well done.

[@EddiesCustomsandRestorations]

I really appreciate the good comment thank you

[@yoderoutdoors]

Hands down the best video of how to on KZbin

[@johnbarnett2804]

Great video guys. I just needed to get to heater actuator under the airbag. But I do have a crack in my dash. This really look easy once you know how to do it. Thanks for the video, Great work.

[@bradduncan8970]

Probably the most thought out & thorough video I've seen. Great camera work & explanation. Great job guys!!

[@EddiesCustomsandRestorations]

Thank you very much!

[@waynemetroke7962]

WOW ! You Guys Did One Heck Of A Job ! AWESOME Video. You guys explained where every single screw came out and went back in. GREAT VIDEO !!

[@EddiesCustomsandRestorations]

Thank you very much! Sure hope we earned a subscriber lol. Trying our best to do the best we can to explain on some of these videos. Thank you for the awesome comment!

[@jeffutter6729]

You fellas did an excellent teamwork project and very good explanation on the does and don’ts and on the tools used. Very good DIY KZbin! There are a lot of KZbin videos out there that could learn how to edit their videos, by watching Your KZbin channel!! Great Job!!!! Five ⭐️⭐️⭐️⭐️⭐️

[@fpineapple1]

Great job guys. I would had hired both of you when I had my mechanic shop some years ago. Y'all work great as a team. Keep up the good work.

[@EddiesCustomsandRestorations]

Thank you very much Fred. We appreciate that a lot. 🙏

[@MrAZHooligan]

I know this is an older video, but this is the best step by step vid I have ever seen on KZbin. Thank you.

[@EddiesCustomsandRestorations]

This video continues to be one of my proudest videos that we worked hard on making due to the time it took to edit it. I am very grateful to you for your kind words, thank you!

[@user-rn4qc4kw5m]

Dónde puedo conseguir el tablero

[@johnfuentez2621]

Great job you two, that’s a lot of work...

[@jiml5473]

Have done so many under warranty I had it down to under an hour. 1 tip, remove the shifter handle. makes the job a whole lot easier.

[@mouniecj]

What would constitute it being done under warranty

[@chippyhockey]

After watching this it convinced me that I could do this.... I am happy to say that I found a good dash on EBay. Then I dyed it the right color with SEM product. It came out perfect. Thank Guys

[@EddiesCustomsandRestorations]

Nice! Glad you tackled it on your own and were able to do so successfully!

[@joemamaluc312]

Yeah I bought one of the replacement cover dashes, didn't like the way it looked and now its in my attic. Watched this video and that crack doesn't bother me as much anymore. Nice job guys.

[@EddiesCustomsandRestorations]

Hahah yea after seeing this video most people rather not lol. But thank you very much for tuning in and appreciate the kind feedback. Thank you.

[@wildhog3217]

OMG!!! and good Lord that's a lot of work. I'll bet that is an expensive job to have done at a shop just for labor..........I'll have to live with my cracked dash.........Thanks for sharing..........learned a lot.

[@EddiesCustomsandRestorations]

Actually I typically bill around $300 labor for this job. And dash was taken off another truck so he bought it for $100

[@grahamman80]

You can also buy a "dash cap". It's made from much better material (ABS PVC) and just adheres to the old one. Looks pretty clean.

[@robertsalazar5061]

This is a very good informative video, keep the videos coming!

[@joseneri1306]

Where did you purchase the dashboard replacement?

[@bluegreen2151]

Thanks for your video it completely help me out I thought I was going to need a second person but I just remove the plastic steering column around the steering wheel and the dash slipped right in place thanks again

[@EddiesCustomsandRestorations]

That is awesome! Glad the video helped you

[@rickrick2049]

Thank you so much for this video. This is the very best video for this replacing the cracked dasboard.

[@EddiesCustomsandRestorations]

I really appreciate that. Yea took a lot of time to edit this video and to make it happen. Thank you for your comment.

[@Todd_S]

Excellent video showing lots of detail. Thanks guys for explaining the clip release procedures and bit sizes.

[@EddiesCustomsandRestorations]

No problem, glad we could help. We are trying to reach 1000 subscribers so it would mean a lot if you could click the subscribe button to help us out. That be awesome! Thank you

[@dewaltgrainger2923]

Great job guy! I get to do mine today...

[@EddiesCustomsandRestorations]

@@dewaltgrainger2923 thank you. Please help our Channel grow by clicking the Subscribe button. We are trying to reach a 1000 subscribers

[@figgz006]

Great video guys!!! This helped me replace my cracked dash and my driver side actuator for ac, figured I would knockout 2 birds with 1 stone

[@EddiesCustomsandRestorations]

Always nice to hear that we successfully helped people on their projects. Appreciate the comment. Thank you.

[@JTKAG]

OMG, that is how tutorial videos are done. 👏👏 Excellent details, very informative and clear instructions. The only thing missing would be a link for the replacement parts. The internet is full of crappy dash covers.

[@EddiesCustomsandRestorations]

Thank you very much, its comments like these that make our day. And the replacement dash actually came out of a used parts truck. Dash was intact. Please help us by clicking subscribe.

[@nosonfontenot3072]

@@EddiesCustomsandRestorations - good find. those dashes are $500 new. :-(

[@EddiesCustomsandRestorations]

@@nosonfontenot3072 unfortunately yes!!

[@roychavez9676]

Only available thru GM at local dealer. No aftermarket on this on boys. Dealer charged 600 for a new one 😬

[@cesarquintana9366]

This is so insanely easy! We took apart my buddies bmw interior and it was a pain in the ass!

[@Nemo_423]

Thanks for the detailed info, need to get mine replaced before too long

[@EddiesCustomsandRestorations]

We got this dash used from another truck

[@chaddouglas2136]

This video was extremely helpful. The only addition I would add is to remove the metal U-shaped brace below the steering wheel. 4 nuts, easy to remove. It allows the steering column to drop even lower and makes getting the dash out and back in WAY easier than they show here.

[@EddiesCustomsandRestorations]

Yea just didn't want to fully remove another item lol. But thank you very much for your positive comment Chad.

[@JuanTorres-lk1vu]

Thank you guys for share this video I’m about to do the same on my Chevy Silverado if it wasn’t for this video I would be in a hard situation but now I know how to do it step by step thanks keep sharing videos about cars

[@EddiesCustomsandRestorations]

Really appreciate the positive comment. You all views is what keeps my channel alive. And I sure will keep uploading more

[@abdulrahmanmohammedalballo1307]

Very well explained, thanks for the amazing video

[@ponohawaii8537]

Great video! Detailed and spot on. Awesome job guys

[@EddiesCustomsandRestorations]

Youre very welcome. Please help my channel by clicking subscribe

[@josecamberos1477]

THE BEST VIDEO I EVER SEEN...VERY CLEAR ON EVERY THING....AWESOME JOB GUYS...THANK U SO MUCH

[@EddiesCustomsandRestorations]

Really appreciate that. Please help us by clicking subscribe. Really helps our channel grow.

[@josecamberos1477]

@@EddiesCustomsandRestorations ok...I will thanks again

[@germanium1872]

Thanks to this video and you explaining step by step, I was able to do this. Thank you so much.

[@EddiesCustomsandRestorations]

You're very welcome 🙏

[@VillegasDV626]

Thanks for the video! Very helpful. I just replaced mine following this video! 👍

[@EddiesCustomsandRestorations]

Thats awesome! Thank you very much! Where did you get the replacement from?

[@waynecasper5346]

Great job guys and super explaining the removal step by step. 👍

[@EddiesCustomsandRestorations]

Thank you very much🙏

[@MrAlex-bp5fg]

This very helpful and detailed thank you.👍

[@EddiesCustomsandRestorations]

You're very welcome.please help my channel out by clicking subscribe

[@billbyrd9845]

Nice job! Thanks for sharing.

[@HESS302]

Very detailed and yall did a fantastic job!!!

[@EddiesCustomsandRestorations]

Thank you very much! Appreciate the good positive feedback. Hope it helped...

[@CodGods420]

Very informative. Thanks guys

[@steveevans8196]

You guys are good, you make it look easy.... Thank you 😊

[@EddiesCustomsandRestorations]

Haha thank you man!

[@rakohus]

Did this entire process but it didn't fix my collapsed AFM lifters. Thanks GM!!!

[@EddiesCustomsandRestorations]

Did you comment on the right video???

[@killaveg210]

Lmao crazy how common it is and no recall.

[@jayeff4457]

Thank you... This video helped me a lot.. I just replaced mine on my 2007 nbs. Especially the tip about how to drop the steering column for more clearance.

[@EddiesCustomsandRestorations]

You're very welcome. We try explaining as much as we can. Please help us grow by clicking subscribe.

[@gerardorocha9145]

I know it's been a while but do you have a link to were you bought your dashboard. I'm lookig around but I can find any or its a scam.

[@jayeff4457]

@@gerardorocha9145 I looked all over the place and like you I felt like some of the ones i found were scams. Only one preview photo and vague item description. I ended up getting mine from the dealer. Ill look for the part numbers and follow up.

[@gerardorocha9145]

JAY EFF thanks. I really appreciate it. Ya I ran into sketchy websites as well with prices to good to be true or just 1 preview photo.

[@jayeff4457]

@@gerardorocha9145 I found my receipt from the dealer. For the main dash (panel) part # gm 19331340 $396 For the etension panel at edge by windshield part# gm 23224733 $ 244 These are part numbers for ebony interior. Gray or tan might be different. Bought them at GM dealer in California, price might be different elsewhere.

[@user-sp7kt7vw7w]

Thank you very much, I have a 07 and my dash is cracked bad and had thought of changing it. I have been a little scared I might create more damage than needed, thank you for the visual. I am thinking I can do this, now I need to see what cost it might be, it may be a while before I do it, but you have helped me for sure, thank you.

[@EddiesCustomsandRestorations]

Yea I quite the chore but very doable by anyone.

[@frankieoliver1]

very thorough and explained.

[@EddiesCustomsandRestorations]

Thank you very much. Much appreciated

[@c4manke]

Oh my God I would pay you to do this to my truck in a heartbeat, I was with you up until the airbag. Seen too many f-ups to be comfortable messing around with that.

[@EddiesCustomsandRestorations]

This comment got me laughing lol but yea its a time consuming job.

[@freshlystealthy45]

And after watching this video I'm convinced I will be going with a dash cover and call it a day...

[@EddiesCustomsandRestorations]

Haha yea its a bit of a lengthy job unfortunately.

[@billbrasky8904]

@@EddiesCustomsandRestorations Same thoughts here, but very impressed by your level of detail and will check out your other videos when looking for DIY guidance.

[@EddiesCustomsandRestorations]

@@billbrasky8904 well I really appreciate your very kind comment. Thank you very much.

[@jesusjj13]

Great video!!! Really helped tons and thank you for explaining everything so well

[@EddiesCustomsandRestorations]

Youre very welcome. Glad it helped! Please help my channel grow by clicking that subscribe button.

[@JTKAG]

OMG, that's how tutorial videos are done. 👏👏👏. Excellent details. Only thing missing would be a link to buy the actual replacement parts. The web is just full of crappy dash covers.

[@fernandohernandez4406]

Agree with the guy above great video but what is the part#?

[@JTKAG]

@@fernandohernandez4406 I too asked and they told me it came from a salvage yard.

[@Pilinchi1]

Looks like a lot of work but it's a lot more if you need to take the HVAC box to replace the heater core :-(. Thank you for posting this video as it helped me with the two extra plugs I didn't know where they went (one was a dummy plug next to the air vent on the DL side and the other was the plug to the ambient light).

[@imjeremy51]

Man, I was hoping it was just the plastic skin on the top that had to be replaced. I will just deal with the small crack in my dash. What a major pain. I will definitely save this video for when I inevitably decide to do it.

[@allanspringer837]

Excellent video!

[@eddietrujillo224]

Now that was a detailed video bad ass guys great clip people need to do more detail clips like this once again bad ass ✌👌👍👍💪✌👌

[@EddiesCustomsandRestorations]

Well I really appreciate your comment. Believe it or not, I get complaints that its too long but it kinda needs to be to actually show the complete step by step process.

[@eddietrujillo224]

@@EddiesCustomsandRestorations Nah brotha the people who say it's to long are people who know how to day it but the every day person who dont have a clue greatly appreciate videos like this I have a 2012 with a perfect dash but i still click on clips like this just to learn never know I watch lifted truck videos all day but its frustrating when they never give full 100% detail like you guys did I watched every minute of this vid to me perfect content

[@EddiesCustomsandRestorations]

@@eddietrujillo224 well I sure am grateful for your comment. Sure makes it feel worth while knowing that others found all the time and effort I put into this actually useful lol. God bless you!

[@cooptroop5]

Great Job! I have to do mine, and this helps alot!

[@EddiesCustomsandRestorations]

Youre welcome! Should get you trough the complete process

[@carloscampos5475]

Job well done fellas...I thank you for sharing... God bless

[@EddiesCustomsandRestorations]

You're very welcome 🙏 thank you for viewing and your support.

[@tomm9860]

Excellent video Thank You guys. You really know what you're doing. Now I can see why people use the skin. I still like your way better.

[@EddiesCustomsandRestorations]

Thank you very much! And I know right lol 😆 but thank you for your comment!

[@gabrielontiveros2338]

Great video guys!! Thanks!

[@EddiesCustomsandRestorations]

Thank you, please click subscribe, it really helps my channel out

[@danielyoung31]

We need to all get together start a class action lawsuit, cuz this cracked dashboard problem is big, I paid a lot of money for my truck and I am not happy what bullshit, great video , thanks guys!

[@EddiesCustomsandRestorations]

Haha yea it is a huge problem...and thank you very much!

[@clydeshelton6533]

Badass video man! Nice work

[@EddiesCustomsandRestorations]

Thank you very much!

[@GregEScott]

Wow great video, but I think im def gonna try one of the molded stick on ones now thought holy cow.

[@EddiesCustomsandRestorations]

Haha yes it is quite the task

[@a.j.stafford5857]

Awesome video thank you

[@EddiesCustomsandRestorations]

Thank you, please help our Channel grow by clicking the Subscribe button. Thank you in advance

[@kenneththomas1062]

Is this replacement dash pad available today? If so, where do I get it?

[@davidborne7706]

Great Video!!

[@Danman1972]

Is the replacement a delco part? Mine is cracked, but all I see are the ones that cover it up.

[@wildstreak]

Great video

[@mikem9620]

Amazing video!!! Thanks plenty.

[@EddiesCustomsandRestorations]

Thank you very much.

[@glockmaestro]

Great video, thanks!

[@EddiesCustomsandRestorations]

Thank you very much! Hope it helped

[@texican1382]

Dang! Good job! I'll just get a Dashmat.

[@EddiesCustomsandRestorations]

Lol I can see why

[@EddiesCustomsandRestorations]

I appreciate your comment, thank you.

[@mr.invisible3770]

I have to do this to mine cuz it’s all broken also. If your that far into the dash already would it be a good idea to change the heater core???

[@weeklyone]

Good job! I literally saw my dash crack today while I was driving. It's not as bad as the one you were working on but mine cracked over on the left side of the passenger side airbag. What was the cost on the replacement dash and where did you source the part? Also, about how much time, "in real time" did you spend replacing the dash? Once again, good job and really good video! I greatly appreciate you guys taking the time to do it!

[@EddiesCustomsandRestorations]

Real time takes about 2 or 3 hours depending on experience and tools used. The dash was sold to a customer from another customer but you can find them on ebay for around 200. And yes it sure was a lot of editing for this video. Please subscribe, it will help my channel grow.

[@cesarpzz1]

Can you help me find it on eBay? Dark titanium?

[@dblank4864]

Nicely done. Very precise and thorough. I need a replacement for my 08 Sierra 1500. Where can I get a great quality dashboard?

[@EddiesCustomsandRestorations]

Really appreciate the comment. Unfortunately to source a new dash is an answer I don't have...I got this one from a wrecked truck that was in perfect condition.

[@MrMannyboy329]

Where did you purchase the dashboard assembly from and how much did it cost?

[@Chasemanuti]

Great video!!

[@EddiesCustomsandRestorations]

Thank you kindly

[@mr.invisible3770]

Every Silverado I’ve seen has a broken dash. Thanks Chevy, cheap ass plastic shit.

[@διαβόητο23φάντασμα]

The sun is hot as fuck

[@josepablo4527]

Excellent video all detailed but seen there's a lot a work

[@EddiesCustomsandRestorations]

Thank you but yes it is a lot of work.

[@EddiesCustomsandRestorations]

Please subscribe, it really helps my channel grow

[@bigwick7626]

I got mine for 135 bucks complete. Took about two -3 hours

[@EddiesCustomsandRestorations]

Sweet! I sure am glad this video helped.

[@adamwade43]

Alot of bull crap just to replace the dash

[@duramaxman8242]

I went in for an airbag recall and discovered my '14 dash was cracking. The dealer even said it was a "poor design." I contacted GM directly to complain and they contacted the dealer and said they would replace for a little over $300. Not bad considering it's normally over $1100 and my truck is 7 1/2 years old.

[@EddiesCustomsandRestorations]

Niiiice!!!

[@LiathBahjatNorCal]

I've installed dash cap over the broken dash cover, now I'm replacing the whole thing bcoz dash cap are not removable. They're good, but if you have to do any repairs under the cover you'll have to break them.

[@YFZMoto]

Where did you buy the new dash parts from? and what are the cost of the new ones?

[@horaciosalgado5781]

You guys do not dusted off before installing the new dash? But other that it’s a great video ! I’ll do the same on my truck

[@rosbelluna5839]

Cool looking truck..

[@EddiesCustomsandRestorations]

Lol

[@ahemsa1]

Fantastic video and I will definitely be following it closely, but I have one small problem, I cannot find the replacement dash! All I can find are annoying aftermarket covers. Do you by chance have the part number for the OE replacement? I did not see it skimming the video.

[@EddiesCustomsandRestorations]

No im very sorry but this dash was a dash that came off of another truck....im not even sure if they are reproducing the dash boards yet...

[@TheEaeduardoaurioles]

Nice video on step by step do y’all have the link where did y’all get the dashboard from?

[@EddiesCustomsandRestorations]

Thank you for the positive feedback and unfortunately i dont have a link. This dash was obtained from a parts truck

[@joseesqueda7681]

If it does have a cab air filter can you do a video how to replace one Thank you

[@mjfdiecast1303]

pretty sure these don't. GM used some other way for filtration. Don't quote me on that, the newer ones might have a filter

[@edwardgriswold2105]

Thank you guys, I’m going to do my 12’ GMC Sierra. How much did you pay for the replacement dash, who’d you buy from? Ty. Ed

[@EddiesCustomsandRestorations]

Im very sorry, I missed your comment but I hope you got your answers from the comments. The dash i got was from another truck that was in good shape. Not sure if they sell them aftermarket.

[@EddiesCustomsandRestorations]

But thank you very much for your positive feedback

[@denniscasey2972]

Hey where did you get the full dash assembly replacement? Do you have a part number?

[@markditullio5434]

If you figure it out bro please leave a link on here I've been looking everywhere and I can't seem to find it

[@erasmohinojos6278]

I ordered mine from the dealership last it’s about 550

[@Ricramalot79]

Was the replacement made out of the of the same material? I would hate to purchase one and then 2 years later it goes to crap

[@leroycharles9751]

Excellent video.Where are you located? Close to Houston I hope.Thank you,Larry.

[@EddiesCustomsandRestorations]

Hello, actually located near Mcallen Tx.

[@ryancarroll3961]

What brand dash did you use and where did you get it Great video Thanks so much

[@EddiesCustomsandRestorations]

Unfortunately this dash wasn't purchased new, it was off of a wrecked truck that had a good dash so we got it from that one. Thank you for your feedback

[@o.hdz15]

14:40 there’s 2 harnesses ones a small gray color and the other one is a bigger black color. Anyone know What the small gray one is? I took apart my dash and noticed nothing was connected to it ?

[@artmichel5572]

F*** IT!!! The cracked dash on my 09 Texas Edition Silverado is staying PUT! Lost my patience and became real p1$$ed watching this. Outstanding job all around guys but at my retired old ass age, I'm pulling out the plastic.

[@donaldlwilkins]

Great tutorial, I have a 2007 it looks about the same?

[@EddiesCustomsandRestorations]

Thank you very much and yes if it is the new body style it is the same

[@michaelcagle5938]

Wow. Thats a little involved!

[@EddiesCustomsandRestorations]

It sure is lol

[@kevinyoung5801]

Great job, where you guys located at? Do you take on jobs to replace a dash?

[@EddiesCustomsandRestorations]

Thank you and unfortunately we don't. I specialize in classic cars now. Located out of mission, tx