How To Make A Giant Catamaran RC Speed Boat - Fully 3D Printed Rc Boat

[@eldimarioche]

Девченки на Ниве супер!!!👍

[@tonywhitezzz]

Чего не ожидал, так это Ниву!%)

[@BenBlackEquinoxEngelhard]

As she's turning the transmitter on I'm just thinking "shouldn't you have turned that on *before* you put the boat in the water?

[@ataskii]

Fabricating unreal videos is somewhat questionable.

[@ataskii]

The lady shaved arms after making the body of the boat.

[@genekloszewski5484]

Always,.. transmitter is on First!

[@kubibear2890]

Did she turn on the transmitter before or after polishing her nails. 😂

[@hetlarfje]

@@genekloszewski5484that was 200 years ago

[@BOGDAN19761]

Респект за Ниву.👍🇷🇺

[@CraftChannelYT]

С уважением.

[@sazonow86]

@@CraftChannelYT дайте угадаю 95й год? как моя.

[@robertgurgo5662]

I’m more impressed by the drone that was out running the boat.

[@skysthelimit866]

I remember me commenting on the original build video how I am doing a large scale of this boat. Welcome to the club of huge scale RC boats

[@jimzeleny7213]

One thing about this modular construction method is the natural floatation chambers that are created by the process

[@ylmazdag9853]

Vay vay vay ben inanın 22 ülke gezip 46 fuara katıldım ama bu devasa büyüklükte bir gerçek oyuncak tabiri ile tasarlanmış harika bir teknoloji ile birleşen henüz bir tasarım proje ile renklenen eser henüz görmedim,,elinize sağlık çocuklar harikasiniz

[@harrybarry2291]

Beautiful, beautiful boat. Almost as beautiful as the two young ladies running it. How did the recording drone keep up with it ?

[@AWBuilder]

Great video and build. Now I want to share a thought that I had for the people that can't afford this kind of amazing boat: when you view a boat from the shore, the size and speed is relative to the distance from the viewer. So in theory, you should be able to get equal pleasure from a smaller boat closer to you depending on other factors such as the sound, and water conditions etc.

[@mjodr]

Smaller boats require extremely calm conditions. The larger the boat the larger the waves it can handle.

[@americanlivesmatter-BmanWild]

​@@mjodrnot necessarily ..its all physics: *balance and anchoring the weight in middle does it all* all it needs is a heavier center of gravity sooo 1 cannonball embedded in the middle of bottom with cork or spray insulation around it will do that *doesn't have to be huge*

[@mjodr]

@@americanlivesmatter-BmanWild Full scale offshore race boats use the same method with water ballast and pumps to tune it. But you aren't going to convince the top teams in the top classes to scale their 48-52 foot hulls down into the 30' range as long as they add a ton of ballast. There's a reason the fastest boats are longer. I live in a windy place. If it's over 15 mph wind I'm probably not going to take out a 16" hull if I had a 42"+ hull available no matter how much ballast I could add. The waves on our local waters get huge. What the OP said was valid, but unless it's a really calm day a small hull just to get a greater sense of speed at scale is just impractical.

[@americanlivesmatter-BmanWild]

@@mjodr or it *can* go 1000mph 😎 (I believe what you said about you live in a windy place) #ibet

[@JusRc]

Very nice video! What did you print with pla or abs? Surprised you didn’t do anything on the inside to reinforce the hull. Impressive drone work as well

[@vyacheslavdernovoy7044]

Отличная работа!!!!

[@CraftChannelYT]

спасибо за ваш хороший комментарий

[@tphvictims5101]

Holy mackerel ma’am, you sure got some hairy arms. Extremely nice boat.

[@kaloyanivanov2801]

It belongs to her husband!😊. Don't you see those are male heands? Blessings!

[@BradyCressler]

Kullandığınız diğer 3d baskılı ürünleri de yayınlayabilir misiniz?

[@SigSkyline]

I’m printing this same model right now, thought on a much smaller Ender 3; I like the surface finishing you did before paint.

[@hakanokan]

Muhteşem bir çalışma … izlerken nefesimi tuttum. Harika bir iş …

[@aaronnelson7702]

Surprised he didn't fiberglass the hull, or fully bondo it. Is it still one piece? That's sweet looking.

[@spencerboaz2385]

Great work . The drone videoing was awesome also . Have a blessed one .

[@mas_dem]

Pembuatan speedboat yang sangat keren kk

[@ibrahimemlikoglu6391]

Her defasında daha ileri bir başarıya imza atıyorsunuz ellerinize emeğinize sağlık tebrik ederim tek kelime ile harika

[@HamzaFPV]

arabanın plakasından yabancı olmadığı belli oluyor

[@MaxImagination]

Wow! Amazing work, these projects just keep on getting better... 👍

[@CraftChannelYT]

Thank you so much bro for your nice comment and support.

[@valeriocicchetta1774]

Si può comprare il progetto?

[@valeriocicchetta1774]

​@@CraftChannelYTsi può aquistare il progetto?

[@TheDjimpuls]

Лодка огнище ! единственное вопрос на сколько долго проживет кузов ? Если гонять на скоростях 100+ даже уголек\кевлар трескатся начинает со временем.

[@seamoonsun]

Awesome. Already made the boat. Now I need to contact the 2 girls to help me carry and put it in the water. Specially, the blonde with fancy outdoor pink fluffy slippers. 😂 nice boat.

[@thierrywillot7635]

Toujours. Plus. Grand. Superbe

[@950gege7]

Great video 👍

[@serdar-bayram]

Yine mükemmel bir çekim ve mükemmel bir video olmuş , ellerinize sağlık

[@SHOPMAXBD]

A great RC Boat build from 3d printed Body Parts. The main thing is it looks like factory built and also runs great. This was the promise of 3D printing machines.

[@adembiltekin8896]

Zor görünen bir araç yapımını bu kadar basit bir şekilde anlatmaları çok güzel 👍

[@CraftChannelYT]

Güzel yorumunuz için teşekkürler.

[@americanlivesmatter-BmanWild]

Like how *she shaved her arms before sticking it in the water* nice touch 😅

[@Ahmet-f2q4q]

Muhteşem ötesi bir calısma bu nasıl bir kalite şapka çıkarıyorum 👏🏻👏🏻👏🏻👏🏻

[@tugruladnankadirtugba719]

Tebrikler her seferinde başka bir seyir güzelliği başka bir heyecan var.basarilarinizin devamı diliyorum.

[@nilgunozsk9985]

Ya bu nasıl bir yetenek,nasıl bir sanat, tek kelime ile bayildimmmm. Ellerin kolların dert görmesin canım kardeşim👍🧿💜

[@mehmetmetin9271]

Çok güzel

[@emrahkzlrmak3033]

İşçilik sanat çekimler muazzam tebrikler devamını bekliyoruz 🎉🎉🎉

[@CraftChannelYT]

Güzel yorumlarınız için teşekkürler. En kısa zamanda ziyaretinize geleceğim :)

[@not2sneaky]

Wow just wow. very nice work. I actually have two of these that i have printed regular size, one is 75% complete. Would you be willing to share your STLs of your extra parts you printed?

[@CraftChannelYT]

Hello, thanks for the nice comment. I will share as soon as possible.

[@juanskatebr]

amazing build!

[@CraftChannelYT]

Hello, thank you very much.

[@deanedeane4318]

Very nice build !!! Did the brunette tighten the hatch bolts incase the blonde broke a nail !?!😉🙃😎 NZ

[@raoulman1]

Beautiful work.

[@flymachine]

Using models to showcase your models - I’m not complaining.

[@rc-fannl7364]

Runs and looks great. I just wonder how well it can withstand a flip at full speed. A carbon fiber reinforced hull might survive, maybe crack here and there, but leave enough buoyancy to stay afloat, especially if some pool noodle was added inside, as precaution. This design might just simply disintegrate, so your rc components end up at the bottom of the lake.

[@FarmerFpv]

It's not completely hollow. It's reinforced on the inside with structural webbing. It also has separate chambers for buoyancy. Each section is separate and sealed. I have built many RC planes, Boats, and RC cars with 3D printing. If done correctly it is very strong. It is also not very fast considering his choice of motors and cell voltage. 30mph at most.

Thanks for the excellent video. Good luck!

[@kenneth_jensen]

Awesome...now install FPV on it 🙂

[@MarkoVukovic0]

Incredible build, well done!

[@meandmylandscapes]

Beautiful video and boat !!😮

[@omarjanudin]

i m really having fun watching this video 👍

[@gammagonad1657]

Not gonna lie, the pretty girls is what made me initially watch(even though I KNEW they didn't build or control it). Thats just not what pretty girls do. I am really glad I did though. I love all things RC, 3D printing, and of course...pretty girls. Awesome job man! Thats some beautiful craftsmanship and one sweet boat!

[@jimzeleny7213]

Same here hate to admit it.....

[@mrb2917]

Yeah that's the whole point einstein

[@gammagonad1657]

@@mrb2917Must be a sad life, just living to make snarky comments towards others

[@3dfactory63]

Nice rc boat

[@Cha1101cha]

Awesome speed boat 👍👍👍

[@hatuneli]

Elinize sağlık çok iyi bir proje olmuş

[@MegaControltv]

super buen video explicativo ... quedan cosas en el tintero pero esta genial!!

[@emirsafak1202]

Bir rc tutkunu olarak yaptığınız işe ve işçiliğe hayran kaldım! Tebriklr çok başarılı! Bir sorum olacak Ender 3 ve Ender 3 v2 kullanıyorum bu tekneyi onları kullanarak baskı alabiir miyim ? :)

[@robinmiller986]

I love your boat

[@AaronFlaming]

Great build and well made video. For me, the two girls did not add anything other than click-bait.

[@tuffiksk]

Yapıyorsunuz bu işi ellerinize sağlık muhteşem

[@namankasana420]

boat and girls both are very beautiful...

[@TH3_D4RK_PL3Y3R]

Jolie demoiselle bisous ❤❤❤

[@mytubehkjt]

Black with PLA? Brave choice but a cool project.

[@jazik7507]

Perfect video ! 👍 perfect work 👍

[@imbranjamil4994]

Goodjob no coment k

[@chriswagner6310]

You guys got a nice boat

[@redinfo5184]

Amazing very impressive rc boat

[@mr.rajikon3911]

Do you have the STLs for the piece you sat your motors on?

[@gokmenkorkmaz3084]

Harika proje,her zaman ki gibi 👏👏👏

[@user-sholawatKEBUMEN]

You made it very neatly, really great👍👍👍

[@tanerkaradas5583]

Harika çalışma elinize emeğinize sağlık....

[@briansullivan.1341]

THIS IS VERY COOL. AWESOME VIDEO!!!!!!!!

[@Баха-о9и5ш]

Шикарно!

[@janzzen1]

The most amazing fact of the whole video? A Lada Niva that actualy drives...

[@shannonoshea644]

Nice build, wouldn't mind getting a mono hull printed not sure if it will hold up with my zenoah marine engines

[@vintagewatch54]

what an incredible project I watched this video a least 10 times I want to do it also do you think I can do it with a 220x220x250 mm 3d printer. Thanks for your great projects

[@manuelrodriguez4833]

Hello, great work, to print it, what scale do I need? I downloaded the files from thingiverse, but you have other pieces, how can I download them, thank you

[@DobryakDobreyshiy]

С появлением 3D-принтеров, жизнь судо- и прочих моделистов, стала значительно легче. Раньше делали болванки - формы для корпуса, и поверх них клеили корпуса из стекловолокна, пропитанного эпоксидной смолой. Делался такой корпус довольно долго. Что, впрочем, не отменяет того факта, что в гоночный катамаран на видео, вложено много труда. Ну и наша "Нива" - приятная деталь. Эх, нашим производителям авто, руки бы в плечи вставить, да мозгов в голову побольше - глядишь, и смогли бы сделать из "Нивы" вполне современную и гораздо более популярную машину. Да, я знаю, что сейчас идет война, и не до того. Но все войны рано или поздно заканчиваются.

[@dirkwalther2354]

Viele Grüße an die türkischen Mädchen! :)

[@felixiron147]

Похоже, что наименее затратная часть из всего здесь показанного - это "НИВА"))

[@gerhardoehler]

Frauenpower .--- wow respekt

[@WOLFTRAXRC]

so satisfying LOL

[@casadioDesign]

That's an amazing work and project execution as always! Just waiting to see in your channel my 3D printed RC car, it will be awesome to see such a perfect work with my project too 😄

[@CraftChannelYT]

Thanks for your nice comment. Hopefully we will do it soon.

[@casadioDesign]

@@CraftChannelYT oh that's really cool!! I can't wait!!

[@michaelschwan-kh5nq]

RESPECT !!!!!!!!!!!

[@TheMadSqu]

This looks fast as hell! Well done!

[@fives5952]

Add it wings and you'll have a seaplane!

[@flymachine]

I’m interested in knowing the weight added by getting that high gloss finish, is it practical to go that much trouble on 3D printed aircraft? I’m building a 2m classic prop liner and would love a smooth finish.

[@ThomasKardaridis]

Hi, great result. I had already finished the Utility Ship and now you inspired me to print the catamaran. But can you please share the 3 stl files for the Carbon Fiber Servo Rudder Mount (5:43), Carbon Fiber Motor Mounting (7:24) and for the one that i saw in 5:26 because I think that these parts does not exists in the Boat Stl Plan that you have in the description. Would you be willing to share your STLs of your extra parts you printed because I would like to start printing as soon as possible. Thanks a lot.

[@G-ln5ep]

did they ever link the stl files for these?

[@ThomasKardaridis]

@@G-ln5ep Unfortunately, NO. Disappointed...

[@robinmiller986]

Where you put a sound card in it and it's like a like a real boat that'd be awesome

[@IRONCLADRC]

Am i the only one who noticed that the 90mm stingers were installed upside down. 😂

[@weathervanerc8147]

Very cool. Well done.

[@ChampTruex]

Amazing work! so you scaled it to 300 percent size ? is there anyway you would be willing to upload your STL's for the boat ? you truly have me wanting to build one now lol!

[@Derbffsclup]

Denke es ist auf 200% gedruckt . Sonnst hätte es nicht auf die druckfläche vom Drucker gepasst . Bin es gerade auf 200% am drucken .

[@ChampTruex]

155 % fills my 420x420 bed@@Derbffsclup

[@ZentekYazlm]

Bu iş bukadar 👏👏👏👏👏

[@scalercclub]

wow~~!!! art rc rc rc~~~!!!

[@rodcognito002]

Intriguing and impressive

[@craycle]

Great Video!

[@SamWolfandCo.fossickandfind]

To stop the porpoising you could install trim tabs which is on most of this beautiful style of catamaran racing hull RC's and then you can open up the throttle and this beauty will sit really nice on the water. Nice work though Cheers Mate 👍👍👍😎💨🏴‍☠☮☮🌈💡🔧

[@kahrimanburcu1862]

Yine harika bir proje izledim. Emeğinize sağlık 💕

[@CraftChannelYT]

Güzel yorumunuz için teşekkürler.

[@dimitrybattesti7930]

@CraftChannelYT hello would it be possible to have the weight of the catamaran at the end of the print because I don't know which engine to put in it because I already have an ESC of 150 a

[@l3mxExtreme]

Onde posso tá comprando o arquivo 3d ?

[@dimitrybattesti7930]

@@CraftChannelYT hello I have just finished the complete printing of your boat there is a little problem with the cover the measurement they are not good at all can you also help Thank you I am waiting for your return

[@G-ln5ep]

i noticed you changed each part you printed from the original. For each part you closed them off and had infill to strengthen them. can you please make a link to the parts and the extra parts you made for the inside. thanks this is a great build and id love to see how i could do on my own.

[@CozyRC]

Great video and very nice build! I would recommend to reinforce the hull with a glass or carbon weave. It would be a shame if you crash and destroy it! Cheers, DJ

[@peterburke5174]

nice work.

[@skrub6969]

I notcied you had printed some parts that are not in the STL file from the link, can you share those as I want to build one this size. Also I'm assuming you made this at 200% size from original file size?

[@bruceyeung4412]

Superb! Thumb up

[@sfurlantuttto1307]

Very nice work near to perfection .... video and sound is amazing !

[@EmrahSevindik]

Çok merak ediyorum bu model waterjet ile yapılsa performansı nasıl olurdu?

[@deeptechnogamer286]

Sağa sıkılır sola açılır😂