Crafting some Bottle Openers

[@keithwinchell310]

What size smaller bit did you use?

[@MKWoodworking]

The smaller bit I use is 1 1/8 inch in diameter: See the specs from Rockler for the Insert here: www.rockler.com/rockler-inset-bottle-openers-6-pack

[@craftedbykvg4649]

I know this is an older video, but is the final thickness 19mm/3/4"?

[@MKWoodworking]

I do reply on older video comments as well. The bottle opener is 19mm / 3/4 inch thick. The ones I do with the shaper origin are 20mm thick.

[@terryraines9952]

thank you for the video, I started making a few but my screws keeps breaking , what drill bit setup are you useing?

[@MKWoodworking]

What type of screws are you using? Brass ones? Then you have precut the thread with a steel screw. Otherwise I just drill a pilot hole hald a millimeter thinner than the diameter of the screw including the thread measured with calipers. I never broke a screw.

[@PaddyDoc]

Are these for sale, if so, hat s the cost? Thanks.

[@MKWoodworking]

Exactly those ones are not for sale. I have a bunch of the #shapermade ones which are shown in this video: "Shaping" a Bottle Opener with my Shaper Origin kzbin.info/www/bejne/nHnWf6KeiJuIfbs but not setup an etsy store yet. The planned price is ~25.00 CHF. Not yet decided if I’d go for international shipping or shipping in Switzerland only.

[@denisraulet]

C'est tout bonnement superbe.Extra le tournage.👍

[@Mountain_Uncle]

Hallo, sieht cool aus! Welchen Durchmesser hat der kleinere Forstnerbohrer?

[@MKWoodworking]

Laut Rockler: www.rockler.com/rockler-inset-bottle-openers-6-pack soll der grosse 2 Inch und der kleinere Forstnerbohrer 1 1/8 Inch gross sein. ~29mm.

[@patrickkirchner5271]

What is the backstory on the logo discs? I think they look very cool. Can you share the details on them?

[@MKWoodworking]

Hello Patrick, of course I can share the details of those stainless steel laster engraved logo plates/coins/... They are laser engraved 20mm stainless steel logos. I've seen them originally from on a German KZbinrs channel called "Andys Werkstatt". I ordered them from Lasergravuren Engelmann in Germany: www.lasergravur-engelmann.de They are not cheap but since I use them only rarely on special pieces that's fine. Hope that is helpful, Michael

[@patrickkirchner5271]

@@MKWoodworking Thank you

[@lumberjack_stacked]

@@patrickkirchner5271

[@HighTone45]

I love the different woods you chose! Can you add the link to the bottle cap hardware

[@MKWoodworking]

Thank you. The bottle opener inserts are from Rockler: www.rockler.com/rockler-inset-bottle-openers-6-pack

[@woodcraftbynieves]

What finish did you use? They came out awesome!

[@MKWoodworking]

Thank you. The finish is „Hartwachsöl“ and the brand is „Kreidezeit“. www.kreidezeit.de/produkt/hartwachsoel-loesemittelfrei/

[@toddcharette7305]

What the metal logo you added to the top side? Where do you get them from?

[@MKWoodworking]

Hello Todd, that is a logo coin out from stainless steel with my logo laser engraved to it. I got that from a company in Germany. I don’t know if that helps. The website can be found using the following URL: www.engelmann-werbung.de/lasergravur-engelmann/

[@timhankin]

Hi what's the dimensions please. Sorry if I've missed it in tbe video

[@MKWoodworking]

The size of the bottle opener is 160mm length, on the top where the metal insert is to open the bottle it has a width of 55mm and the thickness is 20mm. Sorry I can only provide metric measurements I'm not that familiar with imperial measurements :-)

[@Nissan300zxshowcar]

Love this! Just wondering what size forstener bit you used for the smaller bottle opener hole?

[@gaetanino54]

great job, sir

[@brentfarris6784]

What router bit did you use for the roundover?

[@MKWoodworking]

I used a 6mm roundover bit to achieve the roundover on the bottle openers.

[@brentfarris6784]

@@MKWoodworking thanks!

[@azbowhunter1219]

Where do you order those logo coin looking things? I can’t find them or know their proper nameB

[@MKWoodworking]

I did order them in germany using this website: www.lasergravur-engelmann.de It‘s laser engraved on a stainless steel coin. The name is possibly laser engraved logo coin? I‘ve seen it on another diy youtube channel and asked the same question and landed at the website from Engelmann. Hope that helps.

[@budcraft2987]

Where would get a bench hold down like you used in this video!?

[@MKWoodworking]

You should find both variants of clamps I use by following this link: www.ustoolandfastener.com/festool-mft-clamps/

[@StreetKingz4Life]

They are absolutely nice Michael we love it ,cheers

[@MIShopRat]

What is the finish you used in this video?

[@MKWoodworking]

The finish is „Hartwachsöl“ and the brand is „Kreidezeit“. www.kreidezeit.de/produkt/hartwachsoel-loesemittelfrei/