Craftsman Edger won't start finally running But there's a problem

Links to products I have in my tool bag.
Compression tester. amzn.to/2NMgeze
Metering Diaphragm. amzn.to/2Ql3xgA
Air Filter. amzn.to/3dJTsCB
Spark Checker. amzn.to/3bnXjmA
Tygon Fuel Line. amzn.to/3aCGntm
CarbAdjustment tools. amzn.to/3k7cgxe
Primer Bulb. amzn.to/3bwLLxj
Fuel Filter. amzn.to/3dCKasx
Above are affiliate links which means we receive a percentage of the revenue made from purchasing products via those links.
Thanks for watching. This edger was put away in storage for a very long time and now it won't start. Of course the carburetor is the most likely problem however we did find something out that's terrible for this machine.

[@TecumsehRulesbcserk]

My grandfather has a John Deere edger from the 1970s it hasn’t ran for 20 years. He dumps the rancid old fuel out and puts in fresh gas. It started second pull, now that is quality

[@HomeGaragechannel]

Wow that is quality

[@Patrick4959]

Yep always good for residential use and no your not wasting your time on these lovely lawn edgers.

[@HomeGaragechannel]

Thank you Patrick Stapleton

[@hunter7476]

Personably I’m not a fan of them I’d use something bigger like they use for commercial landscaping because they make it look better but maybe that’s not my specialty I like to sit in the mower cut the yard weed whack and it’s good enough for me

[@HomeGaragechannel]

@@hunter7476 I understand how you feel

[@Patrick4959]

@@hunter7476 yep it,s all good and all what the person feels like when tackling the yard jobs out there.

[@electroddxful]

If it’s free it’s worth fixing. I wouldn’t buy it. Awesome repair. I love your videos. I have learned a lot from them. 👍🙏👍🙏👍🙏

[@HomeGaragechannel]

Thank you RayFpv

[@glenbutler9611]

Really appreciate the show-as- you- go demos while troubleshooting.. My only concern is making that many attempts to crank without coming to the conclusion there still may be a problem 😕

[@HomeGaragechannel]

your concerns are warranted

[@gbpf57]

I still have an edger similar to this one. It still works great so no reason to change. My neighbors love it too!

[@HomeGaragechannel]

Nice. Thanks for sharing your experience

[@tchezteaches9740]

Great video! I think people often forget you can turn the blade horizontal and use it to cut thick weeds, brush and areas where a weed whacker struggles. It’s a great little machine and they are very reasonably priced used.

[@HomeGaragechannel]

hey that's a great idea, but I'm not sure if all of them can do that.

[@ricallen621]

I have the old 3.5XL Craftsman and I love all of the different angles that it cuts at. When it's a long day and I don't want to grab my weed whip I push this around

[@HomeGaragechannel]

you make a great point

[@framelawncare6671]

Perfect video for a Friday afternoon.I personally have a stick edger but I have heard for super overgrown sidewalks they work perfectly haveing so much power

[@HomeGaragechannel]

I completely agree with you

[@chumchum2543]

Great Video. I personally prefer those type of edgers. I've used string trimmers but because of my height I have to lean forward and after a while my back just can take it. With this type of edger its a lot easier on my back. One drawback is that curves are not all that easy to trim, that's when I have to go back to my string trimmer. But great video none the less.

[@HomeGaragechannel]

That makes a lot of sense

[@themowerman]

We don't see them over here.. it runs ok.. looking forward to the next one on this to iron out the problems.. take her easy mate

[@HomeGaragechannel]

Absolutely Mick.

[@MagneticMessengerofOrion]

Well spoken instructions, descriptions and educated opinions. I appreciate your descriptive language and visual shots that help fellow owners diagnose any problems we may encounter.

[@HomeGaragechannel]

I really appreciate your time and comment. Thank you Magnetic Messenger of Orion.

[@watermanone7567]

Nice job: If those edgers. etc. were used by homeowners and not commercially, they may have very lilttle hours of use on them. I have a very old leaf blower that a customer gave to me and it sat and the fuel gummed up the carb very badly. However I don't think the engine has very many hours of use on it. Same as your edger. Worth fixing and getting a few bucks for it. Thanks for the video.

[@HomeGaragechannel]

You are absolutely right. Thank you Waterman one

[@franleck]

Our Craftsman edger won't throttle up or down either. It works fine. We use it to edge the beds around our house. Works great.

[@HomeGaragechannel]

Excellent way to work with the issue. Thanks

[@chadriggs3322]

I have one like that. It’s not a waste of time to fix it. I think they work better than the stick ones. I tried using my weed eater with an edger attachment for years and it hurt my back and did not have enough power to cut through thick grass. Thick grass is no problem for that one. If throttle is not working right you may need to check the idle adjustments. The screw on the throttle control is for the high speed adjustment and one one the carb is for the idle speed adjustment.

[@HomeGaragechannel]

You already know what the problem is, thank you Chad Riggs.

[@chadriggs3322]

I only know because mine had the opposite problem. Mine wouldn’t idle down. So I had to mess with the screws to get it in the proper rpm range.

[@chadriggs3322]

I did a compression test on mine and I got 86 psi. And it has tons of power. I have a lot of 4 cycle equipment and I have never got a reading over 100 psi unless it was brand new. They range from 60 psi to 95 psi. If that engine has been sitting along time the piston rings may be partially stuck. It happened it me on an old Briggs and Stratton engine. I would try putting some fresh oil in it and run it a few weeks and the compression might go up. That’s a good edger, it cuts really deep. It’s better than the MTD ones, they don’t go very deep at all.

[@HomeGaragechannel]

@@chadriggs3322 thank you for the information. I might try the oil in the cylinder to see if I can free the ring

[@MrGattor33]

Great video on this good old Sears Craftsman edger. That thing is a good one from back in the day when they still made good reliable equipment! Glad to see you can bring this thing back to life like that 👍 If I am not mistaken this was more for the commercial use ( I could be wrong tho ) and was not one that was used by the homeowner as it is more so today. Again great video!

[@HomeGaragechannel]

Thank you Rob Kercheval

[@williamoneal3947]

For home use only...I have identical edger from 1992. Bought it new.

[@marshallborder9089]

Don't like those old Tecumseh's or working on them either - just getting parts was harder too get and just not poplar anymore since they went out of business . , I still use my 3 HP Briggs and Stratton EDGER at least once or twice a year on my front driveway and front sidewalk . After using it I use my weedeater after that , the edger seems to make the path way better . never saw one with that diaphragm in it like a weedeater before ( I don't like working two cycle engines anyway ) Good video - thanks

[@HomeGaragechannel]

thank you Marshall Border

[@benrobles752]

I rebuilt a similar Craftsman edger with a 4hp Tecumseh engine. I got all my Tecumseh parts off of Ebay. I use it mostly when I have heavy growth along my driveway after that I'll use my stick edger.

[@HomeGaragechannel]

That's how I would use it too.

[@MazichMusic]

If you've got a lot of edging, it's worth it. A line trimmer doesn't cut it when you have clay-type soil, either. Those 1/2 shaft attachments aren't too good, either.

[@HomeGaragechannel]

you just made a lot sense. Thank you George Mazich

[@dr.detroit1514]

Great video. I like these big mama edgers, I have three, an earlier craftsman, an mtd, and a real old lawn boy. All are flea market-yard sale-estate sale specials. For me, they do an outstanding job, they will cut through anything, never run out of power, never seem to get stressed at all. I just do my yard, they might be a bit slow to use for professional use compared to the string trimmer type. My craftsman also came with a diaphram carb that was in very bad shape. I must have ordered a wrong part and got a fully adjustable float bowl carb, which once tuned works great.

[@HomeGaragechannel]

thank you Dr. Detroit for sharing your experience.

[@TheRustyRooster]

I grab them up when I find them and get them going. No body buys them to edge anymore but the last 2 I sold guys use them to install invisible fence for dogs

[@HomeGaragechannel]

Nice use for them

[@SIUDR7202]

It saves my back. I have the same exact one. Love it. It adjusts to all kinds of curbs and heights. Not so good around curvy beds.

[@HomeGaragechannel]

you are absolutely right about that.

[@brianking1138]

I don't see a lot of demand for these anymore. I sell a couple every year but most people seem to use trimmers now. It's good to know you can still get that diaphragm I passed up that same model last year because I wasn't sure.

[@HomeGaragechannel]

Yes I wasn't sure either but luckily it's still available. Thank you Brian King

[@tyroneclarke1666]

Enjoyed watching your video thank you. Regards 🇦🇺

[@HomeGaragechannel]

Thank you Tyrone Clarke

[@davef.2811]

We still have the slightly older, 2-1/2 HP model of that, bought new by my late dad in the early 80s. Since new, it would periodically start to leak fuel, static, sitting in his garage, creating a real fire hazard. He looped the fuel hose, putting a small filter and shut off valve in-line, securing it all with zip-ties. I still break it out and start it once in a while, but over the decades, the carb has always been the Achilles Heel on that machine, never holding its adjustments and a lot of pulls to get it started.

[@HomeGaragechannel]

with this type of Carb, I will eventually behave that way. Probably why they have moved away from it. Thank you Dave F.

[@phildelgiudice3448]

Nice job. Those L H screws are still a little over my head. I’m looking to pick up a used edger so I say Go For It!

[@HomeGaragechannel]

Thank you Phil Del Giudice

[@alexandercosta1777]

I wanted to let you know that i did receive my battery today, got it right after 4:00pm and its barged and ready to be used. Now here do you get your used parts at, local repair shop, junk yard, or internet, or all three. I hope your Friday was good, keep fixing machines, your doing a great service, and i make sure to smash the like button, it helps the channel out.

[@HomeGaragechannel]

Thank you Alexander Costa

[@travisbutler1724]

Good video. I like that you cut the bs out.

[@HomeGaragechannel]

Glad you liked it!

[@williamsnow1531]

I would get it going again and use it.

[@HomeGaragechannel]

Thank you William Snow

[@robertmailhos8159]

Sweet thanks for your fixing that classic edger😎😎I l like using those machines they make yard look great

[@HomeGaragechannel]

Yes I believe you are absolutely right

[@robertmailhos8159]

@@HomeGaragechannel 😬😁😎☺️😃😄😊

[@Gunman1628]

these are great for houses that have not be maintained as to edging. use it to cut the initial and then maintain it with a string trimmer

[@HomeGaragechannel]

Yes that makes perfect sense

[@saliston]

Those are great once you use a trimmer based one these are so much easier to use.

[@HomeGaragechannel]

you are absolutely correct

[@WJCTechyman]

I have an edger attachment for my Echo PAS-2620 and I'm not really keen on using it as I have to keep it from kicking up. I would get a walk-behind unit but brand new they're pretty expensive. The entry level models are usually starting at about $500 Canadian and some can go into the thousand or more dollar range. These Tecumseh metering diaphragm carburetors I have seen used on Tecumseh's 2 stroke engines once used mainly in single stage snow throwers from MTD, but not on 4 stroke. Honda has a similar carburetor on its GXR120 Rammer engines as the vibration would probably cause conventional bowl type carburetors to malfunction.

[@HomeGaragechannel]

wow, very nice information to know.

[@OldChief3854]

The biggest problem I see with the edger is the Tecumseh engine one it. I owned a mower with one on it and will never own another one. Good save on edger though.

[@HomeGaragechannel]

Thanks I appreciate it

[@jerrysoutherland662]

I like those type edgers better than the stick edger.I have one now that needs the same carb. kit.Would you mind giving me the part number for the stens kit. Great video.

[@HomeGaragechannel]

sure, amzn.to/2Ql3xgA

[@nuclearshark3763]

I think most people are using a string trimmer as an edger, you can also get a edger attacment for a string trimmer. So the market isnt huge, and it takes up too much space for a professional compared to use a trimmer.

[@HomeGaragechannel]

Very good point

[@JohnJ25]

Trimmer would never give us as good results as the edger does on straight edges but we do need trimmer for the curve edges so our lawn looks neat & beautiful 😊

[@HomeGaragechannel]

You make a great point.

[@zerkfiter]

I have one similar to this.ive always needed to remove the air cleaner and choke with palm no mater how many primer pumps.unbelievable.

[@HomeGaragechannel]

I know right? it does have its drawbacks.

[@RussellBooth1977]

Briggs & Stratton don't release official compression figures for their flathead engines,my 3 horsepower Briggs and Stratton lawnmower engine runs o.k. at 75 PSI & I replaced the piston rings & relapped the valves in because the engine was burning oil,it has more power with the new rings,I fitted a new set of Stens cast iron piston rings but the OEM chrome faced set are still available albeit dearer. My point is a compression tester doesn't give an accurate reading when testing a flathead engine which is why Briggs and Stratton suggest doing a cylinder leakdown test. You might have an issue with the speed governor if the engine has one, it's probably worth fixing if you have it in your possession but they do tend to make them with a smaller & a lighter engine these days although a 127 cc Briggs and Stratton powered edger is still available !

[@HomeGaragechannel]

Wow I didn't know that about the flathead compression issue

[@marttrev4279]

Nice video, whee is the one of it running after you made a throttle adjustment?

[@HomeGaragechannel]

kzbin.info/www/bejne/a4KylWt9nNCImac

[@PilotViewProductions]

I own this same type edger and use it a lot. I bought it new over 30 years ago and the I found the throttle label to be misleading. It has never increased or decreased the engine RPM no matter the throw position. It's either run or stop....has always worked that way on mine. If you check the linkage, it hooks to the governor arm which, on mine, barely moves, if any, between the lower most and upper most throw of the red throttle lever. That might explain it.

[@HomeGaragechannel]

Thank you Pilot View Productions. The second video will show mine needed an adjustment

[@williamoneal3947]

I have same edger. Throttle leaver works great.

[@HomeGaragechannel]

@@williamoneal3947 thank you William O'Neal

[@massimoterenzi5056]

Personally, I'd never use one, just my opinion of course, love my hand held,I find it much more versatile and easier to maneuver. To each their own!!! Another great vid ,haven't seen a carb like that in......a long time!

[@HomeGaragechannel]

This was one of my first with this carb

[@massimoterenzi5056]

@@HomeGaragechannel Far and few between!

[@dfields9511]

I have never seen a Tecumseh carb like that. edger like that I have never seen anybody use. most ppl I see used a stick edger or a weadeater used upside down. I personally use a weadeater for edgeing

[@HomeGaragechannel]

me too, I have several like these And I think I use one of them, just once.

[@thomascaulfield9277]

you say do we need them ,here in the uk i have never had one through the workshop for repair or even seen one in use

[@HomeGaragechannel]

thank you Thomas Caulfield

[@nashguy207]

Some people still use them. Thats an old tecumseh engine on that one. Never understood why they made the carb like that I like the brigs carb a lot better.

[@HomeGaragechannel]

I don't know why either but it seems to work on that engine. Thank you nashguy207

[@williamoneal3947]

@@HomeGaragechannel I have same edger with same starting problems. I bought it new in 1992 from Sears. It has always been hard to start, so I always had to prime it over the years. But it runs great and does the job.

[@HomeGaragechannel]

@@williamoneal3947 you dealt with the problem very well over the years. Are you going to try and have it looked at?

[@Danesft]

Well, I bought one just to install a underground invisible fence for my dogs. Having a hard time with the kill-switch wire that's attached to the handle bale. There's no available replacement part...

[@HomeGaragechannel]

yes this particular model is so far past production that I'm surprised you could find anything for it that's not part of the engine

[@Jim-ie6uf]

Some of those carbs will be marked with an “F”, that determines whether the gasket or diaphragm goes on first. For the life of me I can’t remember which is which. Looks like you put the diaphragm on first, but it originally went in second, or on the bottom.

[@HomeGaragechannel]

Originally the diaphragm went on first so that's how I put it back on.

[@cdos9186]

Hey Home Garage, I am super excited to ask you for advice. I unexpectedly got a 4-Cycle Troy-Bilt trimmer that hasn't been ran for years. There was no gas in the tank when I got it, the tank was dry, and there was oil in it. I put gas in it and after realizing the choke was on too much, it actually started up! I am shocked it started since it was just sitting for years, and it sounds like it has great compression too. But I need your help to fix a couple major issues with it. For one the kill switch doesn't do anything, so I have to choke out the engine. Secondly and more importantly the trimmer head does not spin at all, even when revving the engine to where it should spin. I unplugged the spark plug boot and tried to turn the trimmer head both ways and it just spins, it feels like nothing is attached to it. Also when revving the engine I hear the shaft inside spinning, which should be turning the trimmer head but the head moves freely around. I took it apart, which wasn't too hard and the kill switch is all hooked up so I have no clue why it isn't working. That trimmer head is the main problem however, do you have any ideas on the kill switch or the trimmer head that doesn't spin?

[@HomeGaragechannel]

Sure, the kill system only consist of the kill switch wires and the grounding wire on the ignition coil. Either one of the two wires is broke somewhere, the switch isn't making contact internally , or the grounding wire is off the coil. Try seeing what you can find out with that information. More than likely either the coupling in the split shaft portion isn't engaging with the lower part of the drive shaft OR the clutch isn't expanding to make contact with the clutch drum.

[@cdos9186]

@@HomeGaragechannel I will try working on it tomorrow and see if I can figure anything out. Thanks!

[@HomeGaragechannel]

@@cdos9186 no problem.

[@cdos9186]

@@HomeGaragechannel I made a video, sorry if it isn't that good but you can hopefully clear some things for me: kzbin.info/www/bejne/iHasdYxua9iIe9U

[@brucecoleman7412]

When edging with a trimmer. I find it difficult to maintain a straight line. I prefer this type of edger.

[@HomeGaragechannel]

me too, these edgers do have a place.

[@jwayne777]

In California, these are standard for commercial residential landscapers.

[@HomeGaragechannel]

thanks for letting us know

[@jwayne777]

@@HomeGaragechannel They sell like hot cakes 🥞

[@larrys0227]

Can you provide a link to when you fixed the throttle, please?

[@HomeGaragechannel]

kzbin.info/www/bejne/a4KylWt9nNCImac

[@stevenchandler4218]

Hi HG. I think you should have a crack at it as you arr so much like me and don't like things to beat you eh! Good video man 👌

[@HomeGaragechannel]

Thank you Steven Chandler

[@harrywind9253]

I have this exact model edger and am looking for a replacement carburetor. The closest that I seem to get is a carburetor that has what looks like a fuel line attachment elbow attached to the diaphragm cover plate (my carburetor does not have that). Is this compatible with my edger? If so, what attaches to the elbow?

[@HomeGaragechannel]

no I don't think that carb will work. that hose should go to the intake as a reference line.

[@BkLiveWire]

I’m working on this exact edger with the same Tecumseh carburetor. Even after a new OEM carb kit, fuel still leaks out the air filter intake. I noticed the pointy part on the needle is protruding up above the carb body and it’s a little hard to install the metering diaphragm as it’s pressing up against it when I stall everything. Do you think that’s why it’s leaking because the needle is being pushed down into the carburetor body?

[@HomeGaragechannel]

yes it would seem that.

[@mikespain8655]

This type of edger is basically obsolete. People use their string trimmer to edge for many years now.

[@HomeGaragechannel]

I have to agree with you

[@christianparkour8880]

What do you usually do when parts for a small engine is discontinued

[@HomeGaragechannel]

try to find the next closest part, from a different machine.

[@tedsmith6137]

I'm betting that the diaphram gasket should be between the carby and diaphram, as in Walbro carbs. There were two gaskets in this engine, one either side of the diaphram, clearly seen as you scraped them off. Only on is needed, on the carby side of the diaphram.

[@HomeGaragechannel]

sure

[@bobber1086]

You can find engine parts for this if you just look up the model number on the top.

[@bobber1086]

www.partstree.com/models/143-834022-craftsman-engine-made-by-tecumseh/engine-parts-list-1-0/

[@HomeGaragechannel]

thanks

[@bobber1086]

i just bought one of theses so this video helped me find out how to take the carb off and how to fix it.

[@HomeGaragechannel]

@@bobber1086 nice, thanks bobber10

[@mattc8821]

I wish you told us how many turns out you were on each screw

[@HomeGaragechannel]

The turns will not apply to your machine. It's unique to each one

[@stuartmurray2094]

I've got a rotary hoe and it's a Briggsn stration I've got to motors change one over and it works

[@1Queloco1]

Does anyone know what kind of belt this edger needs. I have a similar model, except with the bowl carb and no angle adjustment.

[@HomeGaragechannel]

you'll only be guessing, we'd need the model number and the serial to find the right one.

[@brianandrews7099]

Probably the only downside to owning this style edger is storing it; otherwise, they are great because they can cut nice and deep without the need of a steady hand or carrying the machine, plus most of them are built like a tank. If you buy even a good used one for residential use you’ll probably never wear it out. The “stick” edgers are easier to store but these pushers are less maintenance, in my opinion. I would go with a good used Husqvarna or a McLane.

[@HomeGaragechannel]

you make some very good points, I don't mind using these if it's necessary

[@alanlake5220]

I dont see why it has a diaphragm style carburettor, rather than a normal, float bowl type ?

[@HomeGaragechannel]

I think they were available at a very good price point, so they were used instead of a conventional bowl carb.

[@alanlake5220]

@@HomeGaragechannel Could you replace the carb with a cheap replacement ? that might make it worth while

[@HomeGaragechannel]

@@alanlake5220 I believe so.

[@lewiemcneely9143]

Don't know about them. Never saw one used or even run for that matter. If it ran seems like somebody might want it. Blessings!

[@HomeGaragechannel]

thank you Lewie McNeely

[@lewiemcneely9143]

@@HomeGaragechannel U2!

[@adanfranchi578]

Does anyone know where I can find the 9 inch blade? I have been trying to track one down at lowes, and the inner web with no success. Thanks!

[@HomeGaragechannel]

have you looked on amazon? what size inner hole does your's need?

[@adanfranchi578]

@@HomeGaragechannel yes, I looked in Amazon, EBay, Craigslist and went to a couple of local lawnmower repair shops. The bolt is circular and is 1/2 inch in diameter. Amazon and the other sites have blades that look like a star. My blade looks similar to a lawnmower blade and is completely flat. Thanks for your help! The edger runs and works great but the blade has shrunk over the 20 years I had it.

[@HomeGaragechannel]

no problem, what about this part? amzn.to/3k7Y8oz

[@adanfranchi578]

Thanks a bunch for the information. I just placed the order through Amazon.

[@HomeGaragechannel]

thanks again Adan Franchi.

[@hunter7476]

Nice I got one of these free last year all o needed. Yo do was put some gas in replace the fuel lines and it fired up I unfortunately took apart the edger and scrapped it and I am planning on using this engine on a mini bike or a scooter build

[@HomeGaragechannel]

That's a good use for that engine

[@owen8703]

“It ain’t got no gas in it” -Carl

[@guadalupegarcia9165]

I have one just like that and I'm having the same issue

[@HomeGaragechannel]

the fix wasn't that difficult

[@jesussantibanez6711]

👍👍👍👍👍👍👍

[@HomeGaragechannel]

Thank you

[@infinitywear2909]

Hey home garage im really Interesting on how you make the intro can you helpcme out because im tryinh to start my youtube channel?

[@HomeGaragechannel]

Sure. Search "free youtube intros" and that will get you started

[@infinitywear2909]

Ok thanks

[@HomeGaragechannel]

@@infinitywear2909 no problem

[@noeluna5852]

How much for that flex head ratchet. Someone stole mine

[@HomeGaragechannel]

Sorry not for sale. Do you have a harbor freight near you?

[@noeluna5852]

@@HomeGaragechannel they just built one next town over.

[@philfalz01]

i use my edger every week,

[@HomeGaragechannel]

Are you using it on your own yard then or do you do yard work for other people.

[@philfalz01]

@@HomeGaragechannel i do my home and my 2 neighbors i have a honda side walk enger thayt i found bat the curb

[@philfalz01]

i do my home and my neighbors its a honda side walk edger that i found at the curb it works great i replaced the tires repaired the tilt holder and painted it neighbors@@HomeGaragechannel

[@HomeGaragechannel]

@@philfalz01 wow I didn't know they had one of those

[@HomeGaragechannel]

@@philfalz01 do you happen to have a picture of it? If so, could so send it to me? [e-mail]

[@DIZ4SHIZNITS]

Mine does the same thing it’s a tird 🤣😂😂

[@HomeGaragechannel]

Are you going to try and fix it?

[@DIZ4SHIZNITS]

@@HomeGaragechannel absolutely hoping your tips will help

[@orionmyth]

A tool only has value when it is used

[@HomeGaragechannel]

nicely said!

[@brenthill5596]

The real problem is that it's a Crapsman. Every Crapsman product I've owned has been a POS. Especially my lawn tractor. Now I buy Stihl or Echo products.

[@HomeGaragechannel]

I absolutely love stihl and echo products. Just wish they made a mower

[@brenthill5596]

@@HomeGaragechannel Technically they do have mowers for both brands but they are both electric battery fueled.

[@HomeGaragechannel]

@@brenthill5596 really? I'll have to check them out.

[@louissparks440]

my throttle dose not work either

[@HomeGaragechannel]

the second part of this video explains how I fixed the throttle issue

[@rickjames6948]

COMPRESSION RELEASE!!!!!!!

[@HomeGaragechannel]

yes absolutely

[@ZigZag9]

Your wrong on your information with this engine. You will never see above 100psi compression on a small engine like this. 60psi is plenty for this engine. It started and sounded great. Parts are still available for this engine as well.

[@HomeGaragechannel]

no

[@mr1pearl]

Museum piece and yes you fix it because you can ! And you know you want to ha ha !

[@HomeGaragechannel]

Lol.. you know my weakness

[@williamoneal3947]

@@HomeGaragechannel Me too. Identical edger and still a runner. Use about 3 - 5 times a year here in Floriday.

[@HomeGaragechannel]

@@williamoneal3947 Nice, so I guess you use it every few months? It probably does a great job that it takes time for the grass to cover the edges again.

[@WysteriaGuitar]

You could have saved money and time by buying an entire carb unit for like $15.00.

[@HomeGaragechannel]

I couldn't find the original style for this edger, for $15, it would have to be a bowl style carb instead.

[@WysteriaGuitar]

@@HomeGaragechannel Well, nice video BTW of the repair...

[@HomeGaragechannel]

thank you WysteriaGuitar.

[@kittsonic1]

Recycle it.. don't repair it...

[@HomeGaragechannel]

That would be the easiest thing to do