Craft + Tailored How To: PolyWatch

[@SoCalWatchReviews]

Great how to video! Love the newly introduced humor!!

[@craftandtailored]

SoCal Watch Reviews we have some cool how to vids in store for you! We get a lot of interesting questions and we figured why not post some of the answers, tips, N tricks here! 😎

[@SoCalWatchReviews]

Craft & Tailored - That’s awesome brother, looking forward to it. Miguel

[@alexanderlagreca1098]

I know it’s pretty straight forward but this video was so helpful! I just got a vintage Vostok in and it was scratched to hell. I was definitely only going to use a little bit until you said to use more and even do it a couple times, watch is looking almost brand new! Thanks for the help!

[@ethen300]

The Daytona on the wrist is so eye-catching 👍🏻

[@craftandtailored]

indeed!!

[@cracker20]

Polywatch-ing is the best therapy. I've been using this stuff for about 8 years. I sit with my vintage watches in a row and I just slowly buff away til I get the most amazing luster on my watches. This stuff is amazing. I had two 25-year-old Swatch chronographs very scuffed. I brought them back to full luster. I think better than they looked brand new. It's just amazing what this can do to a watch but the buffing just is so calming.

[@craftandtailored]

should we do a Polywatch ASMR vid?

[@cracker20]

@@craftandtailored Why not?

[@fgj4990]

Great - so satisfying to watch!

[@craftandtailored]

So satisfying!

[@firefightergoggie]

I just used Polywatch on a Timex Marathon with some very annoying little scuffs and micro scratches and the crystal (acrylic) came up looking like brand new in about one minute. Good little product.

[@Inuah85]

Did i get it right, for saphir crystal it‘s not recommended? What abot the bezel (pre-ceramic) - is there to pay attention?does it peel off paint of the bezel? Thank you for the advice

[@Renegar87]

Great video

[@jimmysplit7729]

Thanks you were very thorough, I use an auto fine cut and polish compound, works well and I always have some in the garage! How about showing us the best and safest way to swap out a bezel insert. Cheers mate.

[@craftandtailored]

You got it! this is something that we do quite frequently here at C+T and have a couple of great tips and tricks for removing and reinstalling inserts!

[@jorgeyubank]

Absolutely awesome channel

[@craftandtailored]

Thanks so much!

[@TheSecondsHand]

Hello, where can one find that beautiful Rolex display leather pad?

[@christianamato4193]

got excited by the thumbnail and thought I'd see a 1655 on C&T. Still an awesome video!

[@craftandtailored]

Don't worry 😎 we got you covered! stay tuned!!

[@shabbirkhanbhai3238]

Very helpful mate, thanks for this!!

[@bslbsl6040]

Craft and taylor, what do you recommend to take out.micro scratches only visible with light on sapphire crystal?

[@christophercolby435]

A new crystal.

[@radradR0bot]

I just used some of this to buff some scuffs out of my VR lenses

[@craftandtailored]

Its a really great product!!

[@wqsnsr8]

Good video...thanks for tips

[@mastahaze]

Was searching for a remedy to buff out a scratch on my smartwatch which carries a corning gorilla glass. Ended up finding your video. Would you recommend the Polywatch also for that kind of glass? Thank you in advance.

[@craftandtailored]

Unfortunately, Polywatch is only for Crystal. I'm sure you can find some great recommendations for Apple watches on google! That's a little out of our wheelhouse.

[@mastahaze]

@@craftandtailored Thank you! Appreciated 👍 However is not an Apple watch, which is said to have a special kind of sapphire glass. It's a common Android smartwatch with a common gorilla glass. Anyway thanks again for the advice. 🙇🙇

[@nsgfields]

Wonderful how to. Thanks so much for actually demonstrating on a Rollie. 😉

[@CommonSenseHuman]

Polywatch is the best. I have an old Submariner that scratches if I look at it wrong. Polywatch and a minute of work with a microfiber cloth and it looks great. Best of all, I don't have to walk into a Rolex repair shop and risk getting killed for my watch when I walk out the door.

[@kennedymcgovern5413]

I am going to help someone that came here in a panic, because I got here...in a panic, haha. But by sharing what I learned today, I can help someone. I have a Vintage Rollie in my collection. This one is one that most people would recommend never wearing, but just keeping under glass. Well, I am not that guy. I do not do "winder queens." If something should be retired no "never worn" status. then it is probably better for someone else to buy it. I wear my watches. And that is how I put a DEEP scratch in my vintage Rolex. It was so deep that I was about to call my watch guy and ask him of we could find a piece of modern sapphire that is domed like this 70 year old acrylic, the integrity of the originality of the watch I believed already spent. So I came here and did what the video said to do. This video is for light scratches, not deep ones. So, once it didn't work, I went off script. I got a piece of 180 grit sandpaper and scratched the paint out of the original scratch. Yes, this made the scratch bigger, but at this point I was desperate. Then I went to the head and got some of my baking soda toothpaste. I spread that over the whole crystal, and waited 5 minutes. I came back with a dremel, with a buffing pad (speed 2 on mine) on it and buffed it out. It got better...but not perfect...so I repeated. After two runs it was a LOT better. So then I switched over to the poly watch. I did the same thing, buffing out with the dremel, THREE times. After the third time, the scratch was completely gone. So that was 180 grit to clean it up, a dremel to buff...two ruins with baking soda toothpaste and 3 runs with polywatch...allowing the substance to sit for 5 minutes before buffing each time. And I don't have to f__l up this vintage rollie by slapping sapphire in it. Hope this helps someone who came here in a panic.

[@leandrollamas398]

Nice Daytona & submariner 😉

[@craftandtailored]

Thanks!

[@alexyakyma1479]

Thank you.

[@craftandtailored]

You're welcome!

[@adbraham]

Solid end links!!??

[@Ris-v4w]

if it manages to polish acrylic crystals, how come it doesn't scratch the metal part of the watch face? i would be very reserved in doing this with my finger accuracy :)

[@cracker20]

I find that because it's a rather delicate. I found that some of my metal pieces seem to gain a nice sheen as well. It's no different than using a fine sand buffer to buff a case.

[@Mr_TimeMachine_Too]

I seriously was on my way to the store to get an orange 🤣

[@CarlosHernandez-ov9gz]

Great video. Do you have a video on removing bracelets that dont have holes on the sides? lets say a Rolex explorer II (42mm version), its usually very hard. Any tips? thanks!!

[@ypaulbrown]

I use toothpaste with good success......but the Polywatch is probably better......Happich SemiChrome is another good acrylic polish....cheers

[@salocin911]

Thumbs up just for the ORANGE

[@John..18]

Is it some kind of Crystal, or is it Plastic, ??

[@craftandtailored]

PolyWatch is used on vintage acrylic or plastic crystals. Sapphire or mineral glass crystals typically cant be buffed out and can only be replaced if scratched

[@ThisIsDavesGarage]

Holy shit that Rolex is beautiful. Brb selling my car to buy that.

[@gabytro]

Didn t work for me. I have an skx and many many super small scratches that you can bearly see under certain light. Didn t get the job done. I think that there are even more scratches now

[@roadgent7921]

Use glove and one finger. 🤌

[@jacksugden8190]

Waste of time was that expensive paste to give your watch a polished look, might work fine on the plastic or glass on your watch, however, I’m now using Autosol Chromed Plastic Cleaner instead, I’m getting better shines on my old watches that had now came out better than new.

[@NDFHS1]

DOES NOT WORK

[@cracker20]

Sapphire?