Mercedes Crank But No Start

Today we are working on Mercedes Benz , E Class ( W210 ) , with the 220 CDI Engine . The complain is crank but no start .
The fault / error codes stored in the ECM :
P1354-016 Synchronization between crankshaft and camshaft . No crankshaft signal
P1354-032 Synchronization between crankshaft and camshaft . Plausibility
Oscilloscope used in the video : amzn.to/3aVGkXt
Support the channel : / crankauto
Shop coordinates ( for business inquiries ) : / crankauto
CRANK

[@vodonnell1]

Great video thank you from Dublin, Ireland.

[@crank3646]

Thanks Vincent !

[@timevscars]

Heeee Thx man I am able to fix my w210 e230 m111 that didn’t start greetings from Udon Thani, Thailand

[@3DxPOD]

Nice work as usual, I would not have guessed that the sensor was the problem! Keep it up!

[@crank3646]

Cmon , do not underestimate yourself , we both know , that you knew what is problem in the moment that i said "crank but no start"

[@francisdsa6790]

Nice demonstration information thanks new wave form of sensor very clean 👌👍💐🤓

[@DG-od4si]

nice video

[@iankelly2110]

proper diag and fix had a Opel astra h with same symptoms I fitted a oem part too

[@abisismael1343]

Thanks guy

[@chungaiskhan3345]

Thank you I have w212 will check the crank sencer

[@roywordlaw3879]

Can you do a walkthrough video of how you “back door the crankshaft’s position sensor wire” please?

[@sashodishliev711]

Здравей много добро видео браво. Един въпрос малко извън него колега от къде мога да купя качествен launch понеже в бг половината диагности са доста некачествени ?

[@crank3646]

Тези който се продават за по 500 лв в olx вършат работа обикновено

[@airplanemaintenance9187]

Did you have a faulty code for this ? I have same problem with w203. Cranking for long long time and then starts. I’ve changed flow plugs/cam sensor/ fuel filter/ I don’t have a fault code on my dash

[@robertmobileman8304]

Good video , could you show scope set up in future videos . Thanks Rob

[@crank3646]

Thanks Robert ! Sure , didn't know that this will be of interest for someone .

[@robertmobileman8304]

@@crank3646 yeah , I've just started using hantek 1008c so I'm learning and your information would be great man thanks

[@tongesaimunyarari8859]

I have w202 280 automatic 2 days ago stopped starting but l have spark no fuel coming from injectors

[@JMdDesign]

Liked and subscribed! Can you help me with something? CLK 270 cdi, carcks and not start. Only code I get is fuel rail pressure sensor. Replaced - no more codes - but still the same issue, engine won't start. Fuel reaches injectors ( opened and line and fuel came out). I go to the menu of drive auhorization, and looks like it's disabled. I don't know if it's my OBD machine that does not read that correctely, or I have in fact a problem. If I have a problem with drive authorization, what should I look for? Many thanks. Best regards.

[@gari4kata]

Добро видео Crank какво се оказа сензора на маховика ли?типичен проблем, това диларската диагностика на Benz ли е? Какъв осцилоскоп ползваш чрез лаптопа?

[@crank3646]

Да датчик колянов вал , който чете от маховика . Дилърската диагностика за Мерцедес е да . Осцилоскопа , съм го включил в информацията под клипа , там може да видиш точно какъв ползвам

[@gari4kata]

CRANK мерси

[@khalidzahiq3374]

hello friend i have the problem of my 270ml cdi 2004 cranking about 2 seconds and it stops without starting 5 to 7 times without starting i have changed the starter motor and changed the ignition antenna i have checked all the fuse boxes i have found All are going well I have changed the battery and without news but when I connect it with cables with another car working it starts directly. now I do not have to think about any reley that is main! do you know if he has any ??? please help ...

[@thurston905]

My ML270 cdi 2002, cranks but wont start. I have replaced the camshaft sensor. Still no start. How did you solve yours?

[@pierrebezuidenhout3033]

My sensor has been replaced a number of times but all points to a faulty ECU.

[@rajushaikh9045]

What was the scope setup please thanks from 🇮🇳India

[@crank3646]

10 ms per division , 5V scaling

[@rajushaikh9045]

@@crank3646 mean 5 volt DC. Per division scale is it right? Thank u ❤ for reply🙏

[@crank3646]

@@rajushaikh9045 Yes 5 Volt DC . The duration of one division is 10 ms .

[@BasriSakir]

Бате искам да питам колко пари излиза за e36 318i engine swap m52b28

[@crank3646]

1k труд + частите колкото излязат

[@gurgensichinava8464]

რუსულად ან ქართულად

[@gurgensichinava8464]

რუსულად

[@iamher6422]

WTF?!

[@crank3646]

FTW