FAUX FUSED GLASS WITH EPOXY RESIN, TUMBLED GLASS,STAINED GLASS FISH BOWL

FAVORITE THINGS LIST:www.amazon.com.... FACEBOOK GROUP ;
/ 1584956105346842 PRODUCTS USED IN THIS VIDEO:
9 INCH MOLD( inside Diam 8 inch : amzn.to/3zMeFGm
8 inch display stand: amzn.to/43pUBqR.
3 8" DISPLAY STANDS CHEEPER: amzn.to/3rkYXAV
BUBBLE BALL BEADS: amzn.to/3Xx9chS
OIL BASED PAINT MARKERS: amzn.to/3r3rNG7
FISH EYES: amzn.to/44k0Ps3
BLUE CRUSHED SHELLS : MICHAEL'S CRAFT STORE
WHITE STONES: DOLLAR TREE
J DICTION RESIN: I DID NOT LIKE THE RESIN USED IN THIS VIDEO IT WAS THE 10 HOUR CURE I WOULD RECOMMEND THIS ONE:
jdiction.onlin...
10% off coupon code: CRAZYGLASSLADY
4 HOUR DEMOLD & 24 HOUR CURE TIME VOC FREE AMAZING
2ND RESIN USED IN THIS VIDEO CRAFT RESIN CRYSTAL CLEAR: amzn.to/43Pz3DX LOVED IT!
SMALL KITCHEN TORCH: amzn.to/3xZW87T
20 PIECE MEASURING CUP SET: amzn.to/3tAdSX3
RESPIRATOR:amzn.to/3GHu4Ji
GLOVES: amzn.to/3B8VuWZ
RESINS:
J DICTION RESIN:
jdiction.onlin...
10% off coupon code: CRAZYGLASSLADY
4 HOUR DEMOLD & 24 HOUR CURE TIME VOC FREE AMAZING
ART RESIN: amzn.to/3Kpu9WX
OTHER PRODUCT LINKS:
TUMBLERS:
MY 2ND LARGEST #MJR 40 LB TUMBLER: amzn.to/3FChfPC
DAN & DARCI TUMBLER: amzn.to/326qGcr
**** NATIONAL GEOGRAPHIC TUMBLER: amzn.to/325ZtXk HIGHLY RECOMMEND
GRIT 2 LB 60/90 GRIT : amzn.to/3M8tNCz
GRIT 5 LB 60/90 GRIT: amzn.to/3ywh74o
GRIT 36 1LB: amzn.to/37K4CY8
LARGEST TUMBLER: DIAMOND PACIFIC 65T
ADHESIVES FOR GLASS AND TO HOLD THE GLASS PANE TO FRAMES:
KWIK SEAL ADHESIVE CAULK: amzn.to/3M8tNVN
LIQUID NAILS 2 PKG : amzn.to/3M8ZKNT
GE TUB AND TILE SILICONE CLEAR: amzn.to/3m2IKhF
ELMER'S GLUE: amzn.to/3K4IXsL
RESINS :
J DICTION RESIN:
jdiction.onlin...
10% off coupon code: CRAZYGLASSLADY
4 HOUR DEMOLD & 24 HOUR CURE TIME VOC FREE AMAZING
ART RESIN: amzn.to/3Kpu9WX
GLASS COLORANTS:
KRYLON STAINED GLASS SPRAY PAINT: amzn.to/3ox3EUB
KRYLON SEA GLASS SPRAY PAINT: amzn.to/3GF3fG6
TAMIYA TRANSLUCENT SPRAY PAINTS:
RED: amzn.to/40Dx4B1
BLUE:amzn.to/3zkpwat
PURPLE: amzn.to/42W9vVw
PINK:amzn.to/42VaiWT
YELLOW: amzn.to/3GcXMrZ
GREEN: amzn.to/3ZzYo1R
SILVER:amzn.to/40WJqUJ
ORANGE: amzn.to/40BevO2
( WATCH MY VIDEOS ON THESE SPRAY PAINTS: )
TAMIYA: • TAMIYA SPRAY PAINT TRA...
KRYLON: • KRYLON STAINED GLASS S...
ALCOHOL INK FOR RESIN:
LET'S RESIN METALLIC ALCOHOL INK: amzn.to/3nBwCor
LET'S RESIN ALCOHOL INK: amzn.to/3M7jTUw
OTHER SUPPLIES:
RESPIRATOR:amzn.to/3GHu4Ji
GLOVES: amzn.to/3B8VuWZ
20 PIECE MEASURING CUP SET: amzn.to/3tAdSX3
SILICONE MATS: amzn.to/40PhZvV
GLASS NIPPER TOOL: amzn.to/3rnEfgp
FIRE GLASS: amzn.to/3Id8T2D
HEAT GUN: amzn.to/3qA9XYo
EMBOSSING HEAT GUN DOES NOT BLOW THE GLASS: amzn.to/3Gb5uTE
SMALL KITCHEN TORCH: amzn.to/3xZW87T
BUTANE FOR TORCH: amzn.to/3I65ylU
CRUSHED GLASS: amzn.to/3ncp8oF
CRUSHED GLASS:amzn.to/3ru5lSP
GLOSS MODGE PODGE: amzn.to/3IbI1QH
DISCLAIMER: All Amazon links are connected to my Amazon Associate account. I earn a small commision from each purchase without any increase in cost to you.

[@judymcgrath1566]

So creative!! Love them all!! Thanks Linda for sharing!! Enjoy your weekend & the 4th. 😊💖🐠 🐟

[@crazyglasslady]

Thank you! You too!

[@sherriewebber2294]

I really like the blue one. I was surprised the tape did not stay permanent to the resin. So cute!

[@crazyglasslady]

That is actually resin tape I guess they use it a lot with UV resin and jewelry then you can just peel the piece of jewelry off of it. I hope that makes sense. I am going to use it in some other ways in future videos.

[@peachstreetrestyle2518]

These are the cutest fishies! I love your creativity! Thank-you for sharing your incredible talent!❤

[@crazyglasslady]

Thank you so much 😀

[@releasingendorphins232]

I Absolutely LOVE LOVE LOVE this! TFS.❤😂🎉❤😂🎉❤😂🎉❤😂🎉

[@crazyglasslady]

Thank you! 🤗

[@LisaNoyes-ub4zi]

I like them all but I love the fish bowl! I will put it on the "to do" list.

[@crazyglasslady]

Wonderful!

[@iam2bear]

I adore the fish bowl and blue is just fine;) Thank you for sharing. Your instructions are so easy to follow--you were born to teach!

[@crazyglasslady]

Thank you so much!

[@Flutterbyartstudio]

Very cute. Turned out great! Liked your fish using your tumbled glass.

[@crazyglasslady]

Thanks so much 😊

[@hollylowery26]

All are fantastic! 🎉🎉🎉 However the fish bowl is my favorite! Thank you for sharing your gorgeous creations with us.

[@crazyglasslady]

Thanks so much 😊

[@syn707]

How inventive Linda. Using the mica powder on the top edge to make it standout was genius!

[@crazyglasslady]

Thank you!😊

[@tammytoth5874]

Not sure if anyone has mentioned this yet, but a curing lamp like what they use at salons work great. They are stronger than the flat flip ones like you have. I love your work ❤❤❤❤

[@crazyglasslady]

Well I have since bought a stronger one that folds and has the light on the top and bottom.

[@heidiewing6566]

Just a Fantastic visual/learning tutorial that I'm blown away by!! Thank you!

[@crazyglasslady]

You are very welcome thank you

[@fritopaws]

Great ideas! I'm a former stained glasser and never thought about using all my unused glass inventory in resin designs 😮 Gonna have to watch more of your videos! Not sure if this is what you were thinking of, but how about some nail art powders in iridescent blues. I think if you lightly brush it on the cured first layer in the water zone it might give you the look you're after.😊

[@crazyglasslady]

Thank you! I wonder if nail art powders are similar to mica powders? Do you think they would be somewhat translucent?

[@BeckyA59]

They look great. I actually thought they would be coaster size, so that size is cool

[@crazyglasslady]

Yes I would like to try to do some coasters sometime. But have not done any yet.

[@AwesomeIncidentals143]

Great idea Linda!!! Love the little fishies!!! Thanks for sharing your ideas and talents with us!!

[@crazyglasslady]

You are so welcome!

[@MrsFrogW]

I love everything you make! Thanks so much for your detailed videos.❤️

[@crazyglasslady]

You are so welcome!

[@nancypedersen7027]

As always you impress me with your creativity. I am always inspired to be a little more creative. I’m kinda stuck on flowers with a saying on it. Please continue to share your creative ideas with all of us. Have a great holiday

[@crazyglasslady]

Thanks Nancy, you too!

[@donaroberts6390]

So cute! Another great video, thank you!

[@crazyglasslady]

You are so welcome!

[@sandynuber1509]

I love them all Linda. ❤ Much love from Texas ❤🤠

[@crazyglasslady]

Thanks so much

[@pamcolechadwell1302]

I love them, there all gorgeous. yeah just mix in a tiny bit of mica at a time in the resin. you can also get better UV lamps.

[@crazyglasslady]

Thank you! Yes I just bought another UV lamp hopefully this is better!

[@beachlife888]

Hi CGL :) I've seen other Resin Artists make blue resin water, by mixing special resin colour tints to make any colour they desire ! The tiniest amount mixed in with the resin makes a lovely transparent blue tinted resin , perfect for water ! I enjoyed this video , love the air bubbles ! xo

[@crazyglasslady]

Thanks for the tip!

[@dianaschumaker4252]

Amazing! I held my breath while you were using the razor. It was incredible that you didn’t cut your mold.

[@crazyglasslady]

So there was actually a layer of resin under that then after that set up I poured the second layer with the blue.

[@dianaschumaker4252]

@@crazyglasslady ahhhhh, sorry, I must have missed that.

[@crazyglasslady]

@@dianaschumaker4252 yes that would have been very risky lol don’t worry I’ve had a lot of people comment about that. They didn’t realize I put a layer of resin down first.

[@dianescraftycreations]

Absolutely love the fish bowls!!

[@crazyglasslady]

Thank you!😊

[@suepetty6225]

girl, You are so creative! Love it.

[@crazyglasslady]

Thank you! 😊

[@jayelleart]

Beautiful work, Linda! My favourite is the fishbowl. Have a great day! ❤️

[@crazyglasslady]

Thank you! You too!

[@shurlanelsonmcmanus5697]

You are so creative, I love them all!

[@crazyglasslady]

Thank you! 😊

[@maddieadams75]

Omg, I just love your glass artwork, I love all three of them. They are all perfect. ❤ ( you questioned your UV lamp, mine is a 48W and works great, I’ve had it 3 yrs.)

[@crazyglasslady]

Thank you yes I need to look for a stronger one!

[@lauriewilson4741]

@@crazyglasslady Toonpish just put a fresh video out with an unboxing of 2 UV lamps. One was XL. She has a discount code and it comes with other goodies

[@crazyglasslady]

@@lauriewilson4741 thank you I will check it out

[@Cajunkaty]

Those are sooo pretty.

[@crazyglasslady]

Thank you! 😊

[@heidiewing6566]

Fantastic Fish! Sometimes when I'm doing a larger mold and don't want my colors to combine, I place the popsicle sticks under to lift up the section I don't want to get any resin.

[@crazyglasslady]

Oh I can't picture that. Are you in our facebook group I would love to see a picture of how you do that.

[@heidiewing6566]

@@crazyglasslady I looked for it above but couldn't find it. 😕

[@crazyglasslady]

facebook.com/groups/1584956105346842. see if this link works

[@deeannhansen1469]

Looks amazing!! Love your creative ideas!!

[@crazyglasslady]

Thanks so much! 😊

[@aidafekir9523]

Love your work and love your personality ❤❤❤❤❤❤

[@crazyglasslady]

Thank you😀

[@karendoss6026]

LOVE them!! You always amaze me with your ability to make everything you do look so easy and beautiful!!

[@crazyglasslady]

Thank you so much!

[@lauriewilson4741]

LOVE the bubble sounds in the intro 😂

[@crazyglasslady]

Thanks I get tired of finding free music this was an easy one LOL

[@user-lj3qo6bv1z]

You just amaze me every time! You’re so creative Linda! I love them all, especially the fish bowl!!

[@crazyglasslady]

Thank you so much!

[@kimberlythompson2858]

@@crazyglasslady Where did you purchase your grinder for doing your glass information on it would be great keep great videos coming❤

[@crazyglasslady]

Thank you! Amazon here is a linkamzn.to/428yrZS. @@kimberlythompson2858

[@sandysanders4199]

These turned out so cute! 👏👏❤️

[@crazyglasslady]

Thank you!

[@DarleneScott-q3f]

These are beautiful, great for gifts, you amaze me❤️

[@crazyglasslady]

Thanks again😊

[@dalemaclaren7576]

Absolutely gorgeous ❤

[@crazyglasslady]

Thank you! 😊

[@elainelee6741]

Love your channel, great ideas.

[@crazyglasslady]

Thanks so much!

[@kimbaker3344]

Love them your very talented Thankyou for sharing ❤

[@crazyglasslady]

Thanks so much 😊

[@sallymccornack122]

These are amazing. Such a great idea ❤

[@crazyglasslady]

Thank you! 😊

[@mijceacmijceac402]

Trabajos maravillosos

[@crazyglasslady]

¡Gracias!

[@btrflywmn]

❤ them all so cute! Thanks ❤

[@crazyglasslady]

You are so welcome!

[@kimberlythompson2858]

You are so brilliant❤

[@crazyglasslady]

LOL thanks!

[@menotyou6254]

Thank you so cool your great so helpful

[@crazyglasslady]

You are so welcome!

[@j.c.7555]

Oh soooo cute! My favorite theme…anything beach. Those are darling Linda. I was wondering what amt. of resin are you using for this project? Is it One cup Half a cup each parts? Thanks❤️💜❤️

[@crazyglasslady]

Thank you Yes I think in the first 2 I used about 4 & 4 oz for a total of 8 oz each and for the 3rd one which had 3 layers I think I used about 4-4 and then another 4 for a total of 12

[@melbabowen4389]

So so cute!!!

[@crazyglasslady]

Thank you!

[@KathyBeaver-qx6hz]

Very cute! 😃

[@crazyglasslady]

Thank you! 😊

[@memesissydollar3080]

Really , really Nice !!❤

[@crazyglasslady]

Thank you! 🙂

[@sharonyanaitis1047]

Love this!!!

[@crazyglasslady]

Thank you so much

[@cherylburkitt9722]

Adorable 🥰💕

[@crazyglasslady]

Thanks!!!!!

[@crazyglasslady]

Thank you!😍

[@cindyskavland-cz3hw]

Perfect!

[@crazyglasslady]

Thank you!

[@RDnAC]

So cute. Have you tried alcohol inks in your resin? That’s what I use.

[@crazyglasslady]

You I have and the mica powders.

[@tammytoth5874]

AMAZING 😮😮😮😮😮❤❤❤❤

[@crazyglasslady]

thank you!

[@appleoneill5135]

Love them 💕

[@crazyglasslady]

Thank you!

[@beachmermaid]

Could you possibly use a line of silicone sealer to make a dam for the blue layer? Then remove it when cured?

[@crazyglasslady]

That is a good idea! I bet that would work.

[@crazyglasslady]

The only thing is, you would have to be careful you couldn’t let the silicone touch the side of the mold because the silicone would stick permanently to the silicone mold. I guess you’d have to put a little piece of tape there.

[@beachmermaid]

Didn't think of that, but maybe yes. Plastic wrap maybe.

[@crazyglasslady]

Yes, good idea

[@texasmarshalls]

Which resin do you recommend for a deep pour? Thank you for your great channel!

[@crazyglasslady]

I don’t know that i have ever done a deep pour. The deepest I have done for my round mold is prob about 1/2 inch But here is a good video to watch to compare kzbin.info/www/bejne/l3bSfqmQmp1-h5o

[@texasmarshalls]

@@crazyglasslady This was a great video! I noticed he didn’t try ArtResin? Have you tried this one and if so what are your thoughts? I can get this easily at the craft store. The deepest pour I’m doing is a heart mold less than a inch deep.

[@crazyglasslady]

@@texasmarshalls I have used Art resin and it is great. The only reason I have started trying other resins is because I have been looking for resins that are less likely to yellow esp out doors. My mermaid outside is done with art resin and has yellowed. I watched a video from Steve Mac Donald who tested some different resins out side and Art resin did the worst. Having said that you really should not put resin in the sun is what I have found it is just not meant for extreme heat or sun. The resins I have been using now hold up better out doors so I assume if they are less likely to yellow outside they may yellow more slowly indoors. The ones I am using are fast curing resins not good for canvas. Art resin is not for deep pours Im not positive but I believe you can only do 1/4 inch at a time Hope that helps

[@texasmarshalls]

@@crazyglasslady so helpful! Thank you also for your quick response!

[@paola1188]

Bravissima Linda

[@crazyglasslady]

Grazie!

[@lauriewilson4741]

Those fish eyes top it off

[@crazyglasslady]

Thanks they look very real

[@lauriewilson4741]

Genius

[@crazyglasslady]

You are too sweet!

[@lauriewilson4741]

@@crazyglasslady truth!

[@ameliarodrigues9124]

Stannig ❤

[@crazyglasslady]

Thank you!

[@Galahue]

Oh, my, I would never use an exacto blade to cut on my silicon.. But the end result is nice

[@crazyglasslady]

No there was a layer of resin under that layer of resin so I was cutting the soft blue layer of resin that was on the hard clear resin. I hope that makes sense

[@debradusablon5054]

what size silicone round did you use?

[@crazyglasslady]

So at the end of every video I always explain everything I use usually especially with this mold because it is called a 9 inch mold on amazon but the inside diameter is actually 8 inches why they call it that I have no clue. So the stand for it is called a n 8 inch stand. I felt like that was confusing. Also Under the about info under the video I try to list everything I have used in the video. Here are the links to the mold and stand. I have made about 8 other projects and videos with that mold I have gotten my moneys worth LOL . Mold: amzn.to/3SwO7TI Stand: amzn.to/3Hw0EQT

[@kathrynflom9333]

Could you put a hole at the top somehow so youcould hang it?

[@crazyglasslady]

Yes, you could. If you go back a few videos where I did the flowers on the same round mold, we screwed holes in the top and hung them by a chain.

[@kathrynflom9333]

@@crazyglasslady i found it and I plan to do that. You are so creative and such a problem solver. I love your videos!

[@crazyglasslady]

@@kathrynflom9333 thank you. Good luck.

[@carolmccullah473]

What kind of mold?Where do you get them?

[@crazyglasslady]

If you watch till the end of the video I show you the mold and explain how I do it. But here is the link to the mold.9 INCH MOLD( inside Diam 8 inch : amzn.to/3zMeFGm.

[@carolmccullah473]

I thought I did but I guess I was so excited about your project that I may have missed it. 🙂🙂🙃

[@lauriewilson4741]

I made a similar pic with stained glass Unfortunately someone took it or I’ve misplaced it

[@crazyglasslady]

Oh no.

[@lauriewilson4741]

I bought some actual fishing lures for resin but there’s never enough time for crafting 🥴

[@crazyglasslady]

I know so many ideas and not enough time!

[@lauriewilson4741]

@@crazyglasslady keep ‘em comin 😁

[@beachmermaid]

What is the name of the Facebook group?

[@crazyglasslady]

Crazy glass lady glass and resin art

[@kimberlythompson2858]

❤❤❤❤❤❤

[@crazyglasslady]

Thanks!😊

[@sandysanders4199]

You should be able to use clay as your resin barrier.

[@crazyglasslady]

Resin won't stick to clay?