Creality CR Scan Raptor and Otter - Scanning Experience in Marker Mode

Here's the scanning experience and review for CR Scan Raptor and Otter in marker mode.
Please note that I map the point cloud at lower resolution (0.2mm) for manipulation in Blender.
Here's the link for marker target. (Sketchfab)
skfb.ly/oUKzC
Marker 30 deg
skfb.ly/oUNEO
Marker 60 deg
skfb.ly/oUNFx
Maker long distance target
skfb.ly/oURvQ
#creality #3dscanner #blender
Music by Bensound
License code: PBEZH9FNR7Z26NNO

[@ironmikeharrington]

Excellent video. Good seeing someone who actually knows what they are doing.

[@stevesloan6775]

Really interesting comparison of the two scanners. Loving your content so far. Please keep up the great work. I’m wondering if I could use a wireless monitor for 3d scanning. That way I could use my workstation for 3d scanning. 🇦🇺🤜🏼🤛🏼😎🍀☮️

[@blackjmyntrn]

brilliant!!!! the Raptor it is!

[@volcomx14]

This is awesome! Can you go into more detail regarding the last 2 minutes when you imported the ply file into blender and created that shape for the base? I have never used blender before. I've been trying to go the CAD software route with the same end-goal in mind. Converting the point cloud into a solid and then exporting it as an editable file that can be used in Shapr3D is harder than it should be, and I haven't figured out how to do it yet. Your method looks much quicker in the video but I'm not sure how many steps were left out to get there.

[@Payo-TensileCreator]

I'll try to make step by step VDO.

[@volcomx14]

Thank you so much! Really looking forward to it 🙌🏼

[@android4cg]

Great video with lot of useful information! Do you have any experience in comparison of Einscan HX vs Raptor? This would be interesting.

[@chinard]

the tower ideal looks interesting, should they be printed white like you have them or black like the other markers... or does it matter?

[@Payo-TensileCreator]

It doesn't matter with Raptor, but it does with Otter. Otter in small/medium marker mode doesn't like high contrast object because the object brightness tied to marker brightness.

[@chinard]

@@Payo-TensileCreator yeah i have the otter and i am still figuring things out to get good scans. I have printed out the smaller pyramid shaped markers for the turntable, i printed them in black with white dots. With the towers would it be best to do the same or would white be a better choice for the otter?

[@stevesloan6775]

You could put a steel plate on top of your turntable, and use magnetic markers. Do the same for the bottoms of your marker towers. 🇦🇺🤜🏼🤛🏼😎🍀☮️

[@Payo-TensileCreator]

This plastic turntable has terrible bearing. It loses and rattle. If found one with steel frame for 20 USD without the top plate. Probable CNC cut the 1.0mm SST plate so the magnet can stick to it.

[@denisstepanenko3037]

Could you share stl for marker bars?

[@Payo-TensileCreator]

Here we go. skfb.ly/oUKzC

[@kareldvo]

Still very impresive results without calc spray.

[@user-cy1gv9bx9s]

In the end, what is better to take?)) Small objects are not of interest, mostly medium ones

[@Payo-TensileCreator]

For object 25cm - 50cm I still prefer Raptor. Otter uses the same dept camera in small and medium mode. The detection area is smaller than Raptor.

[@user-cy1gv9bx9s]

@@Payo-TensileCreator According to some of your videos, I think you praise Raptor, according to others Otter, I want to trust your experience))) According to your answer, 25-50 raptor is a class, what is needed, but I saw how you scanned the earphone, it is very small and Raptor with Your experience worked perfectly!

[@android4cg]

Where to get the scan tower and 30/45 degree pyramids? Seem to be very useful.

[@Payo-TensileCreator]

Here we go. (I said it wrong; it's 60 deg not 45.) 30 degree skfb.ly/oUNEO 60 degree skfb.ly/oUNFx

[@stevesloan6775]

Could you use a markers with a 4th dot on the top of the marker? That way hopefully you could point the scanner directly down on the turn table, and keep tracking. Might be a good 3d printing project. 🤨 🇦🇺🤜🏼🤛🏼😎🍀☮️

[@Payo-TensileCreator]

All 3 markers on the pyramid are detected by the scanner on top view.

[@stevesloan6775]

Did you see the crazy turntable REVOPOINT sell? It is rated to 200kgs!!!!! 😵‍💫😵‍💫😵‍💫 Mind you it’s nearly $500US I’d love to own that turntable, for scanning engines, and motor parts. Oh and people!!😁

[@Payo-TensileCreator]

I think it's better to control the rotation, speed and direction by hand. Sometimes you have to go backward for retrack.

[@stevesloan6775]

The revopoint turntable has an app to control its rotation in real time.