Creality new Core XY high-speed 3D printer K1C unboxing review

The K1 series was very popular, but at the same time, it was expected to improve due to some disappointing aspects. It was released with improvements under the letter C, which stands for Carbon.
K1C official site
store.creality...
Purchase link
s.click.aliexp...
If I had to give an overall review, it was so much better.
Overall, ringing, a chronic problem with the K1, has been greatly improved, and the overall quality has also improved greatly, so I was very surprised when I tried it. It looks like it will truly become a chamber-type all-round printer.
A notable change compared to the existing K1 is that the design of the bed itself appears to have changed to prevent distortion, and the nozzle part has been changed to an integrated nozzle form, making replacement easier and using a nozzle made of steel, resulting in higher temperature output. has been changed to make it more stable, and it appears that the opinions expressed by K1 users have been reflected in the extruder connection area and some other parts.
In addition, a carbon filter is provided as standard, perhaps to prevent the musty odor that may be generated when printing at high temperatures, and because of this, it can be used with relatively little odor even when printing filament such as PA-CF.
In addition, Hyper PLA-CF filament, which is expected to be released this time, is expected to be very popular due to its very good output quality.
Overall, I think it will gain a lot of popularity as it has improved all the things that existing K1 users were disappointed with, but at the same time, I think it would be nice to release a improving kit for existing K1 users as well.
Contact
[e-mail]

[@soonsoon-workshop]

블로그 상세 리뷰 : bit.ly/3vNHC62

[@alphago410]

챔버식 좋은데 챔버 내부에 필라멘트 릴까지 포함해서 넣는 형식은 없을까요? 먼지가 필라멘트와 들어가면 안된다는데 릴이 외부에 있으면 먼지가 너무쉽게 쌓여서요

[@josegaditano1918]

好吧，如果在这个版本的 K1 C 中，您能够做正确的事情，那么 K1 有大量错误和设计不良的部件……无效保证，您会忽略它作为保证。 Hǎo ba, rúguǒ zài zhège bǎnběn de K1 C zhōng, nín nénggòu zuò zhèngquè de shìqíng, nàme K1 yǒu dàliàng cuòwù hé shèjì bùliáng de bùjiàn……wúxiào bǎozhèng, nín huì hūlüè tā zuòwéi bǎozhèng.

[@YonggyeomAn]

완전 초보입니다.. K1C를 구매해서 사용하고자하는데 오르카슬라이서에 K1C항목이 없더라구요.. 전에 올려주셨던 영상에서 K1은 오르카를 써야한다고하셨는데, K1C는 오크라슬라이서 처음 시작할때 제품을 K1으로 선택해도 되는건가요?

[@Harang_3295]

X, Y축 로드의 경우 윤활을 하지 않고 IPA와 천을 사용해 청소만 합니다. X, Y축 풀리, 베어링에서 소음이 발생할 경우 아주 약간만 용도에 맞는 윤활유를 도포 해야합니다. 참고로 동봉된 그리스는 Z 리드스크류 윤활에만 사용하시면 됩니다.

[@soonsoon-workshop]

좋은 정보 감사합니다!!

[@김샘-g4e]

링잉, 고스팅 현상은 어떤가요? 실크 필라로 테스트 함 해봐 주셨으면 감사요~

[@크나우스]

이거보고 구매 했습니다. 이제 한글이 지원이 있네요. 업데이트 해보시길.

[@seonghyukhong2098]

K1c 라이브 진짜 대단했네요. K1에 대한 이미지가 확 바뀌네요 조만간 이런것도 보려나요 ㅋㅋ kzbin.info/www/bejne/g3-zn4ebfsanb5osi=bbRTheHcWqaeGmdH

[@soonsoon-workshop]

어제 보니까 하이퍼 PLA 설정하고, 데이터 좀 수정해서 0.4 mm 높이정도로 하고 내부채움 5% 정도하면 8분대도 가능 할 것 같습니다 ㅎㅎ

[@seonghyukhong2098]

@@soonsoon-workshop ㅗㅜㅑ 8분!! 대단하네요!!