Creality's Flagship K1C 3D Printer: Game Changer?!

[@RCGirl]

Check out the Creality K1C (on sale!): shrsl.com/4gyy1

[@Xhilong]

This is a great review of the K1C from a hobbyist point of view and not a print farm one.

[@derek3376]

You might like RC Thumper on printables. It's 1 1/8 scale Cj-7 that's almost entirely 3d printed, except electronics, bearings and the axle gears. The designer has a bunch of other free RC designs as well...including an air boat and a pontoon.

[@JingleStic]

Ive had my k1c for a few weeks. I would suggest the following 1.install moonraker and fluidd or mainsail. It really opens up the options you have with this printer 2. look up a lid mod for this. The standard height the lid sits the chain will still slap it and knock the lid off. as always thanks for the video. Great as always!!

[@onecookieboy]

I haven't modified my lid and have had zero issues, the chain is well clear of the lid and it clicks down pretty hard.

[@aaronpape7270]

Glue is mandatory for Petg and tpu if you don’t you will destroy the pei bed since they love to attach to the bed

[@340havoc]

I still like the WhamBam PEX surface for PETG and TPU. It will release without chunking the surface. It will wear/get fuzzy over time but you do get your moneys worth out of it. (took 3 years of daily printing). It works pretty well for most things, but I still prefer pei for the higher temp filaments like ASA/ABS.

[@FishyAirsoft]

Note on the glue stick. It isn't used to make the prints stick. It is to help the prints release from the bed. I ruined my build plate because I used a material that stuck so much to the bed it couldn't come loose without the bed ripping. Have been using glue since without problem.

[@RCGirl]

Yeah I've heard it used as a print release. I haven't really ever needed that either. Let the prints cool and they pop right off.

[@kaseyboles30]

It can do both. I've had prints that failed to stick without it, and other that stuck scary hard without it. Depends on the filament and the build-plate among other things.

[@pcarson9654]

My bed is flexible

[@pcarson9654]

It magnetic and it flexible

[@bruddaozzo]

@@RCGirl TPU is one that can stick to PEI sheets and not want to come off. This is even more true if you use a smooth PEI sheet. I screwed up big time doing that :P

[@47katt]

can"t wait to get mine. I have many ideas for custom icecube trays that i can give for christmas gifts . next maybe sunglasses frames.. or soap dishes or rc truck bumpers. when i find the time to figure the damb thing out..

[@aaronpape7270]

You should look up the helper script to unlock full kipper mainsail and moon raker. I did that and the amount of control I get through mainsail is amazing and the klipper I put shaping and Nozzle/bed pid calibration is amazing you can even calibrate the belt vibrations.

[@echobeefpv8530]

Great to see you doing these reviews, I think you will introduce a lot of people to 3D printing for the RC hobby. I've been doing it for years now, and also design my own custom parts for all my various hobbies ( slot cars, drones, and the printer itself ). Nothing like designing your own parts, and programs like Tinkercad, etc. are free, and very easy to learn.

[@RCGirl]

Thanks yeah that's the next step is designing parts. I have a new 3d scanner on the way as well!!

[@echobeefpv8530]

@@RCGirl this is my 3D designed and printed ferris wheel for my slot car track, my buddy did a video, if you are interested.The ferris wheel is all Tinkercad.kzbin.info/www/bejne/jJOvdaxjYtqVgs0

[@chrisgulick3608]

Do you have a review on the electronics used on the inside. What processor is used? what os is used. What kind of protection is there for fire control, overload current conditions. What happens when motor windings short. Thank you

[@crssbo4645]

Probably a good thing i couldn't get my hands on a bambulab a1. 😅 Thanks for the video!

[@TheCalaudio]

nah

[@joe_cool3615]

That's cool, it doesnt seem as complicated as i thought it would be.😎

[@SlowFlyer85]

Awesome review I been looking for one to do some pilot figures and items for my rc planes I will check in to this unit great job 😊👍👍👍👍

[@Bimmerstye1]

Maybe I didn’t do enough research before buying myself a Bambu Lab P1S. Don’t get me wrong, I like that printer but I feel I could have saved myself quite a bit of money and bought this one. It looks like it comes close to the capabilities of the Bambu for almost half the price...

[@TheCalaudio]

nop

[@WhoIsJohnnyLange]

Sorry if I missed this in your other videos but I'm wondering.... Are you using a dry box for your filament?

[@RCGirl]

@@WhoIsJohnnyLange I'm not. I need to get one I'm told.. But honestly I haven't really had any issues getting quality prints most of the time.

[@spaceagepimpin5675]

I have one, its great!

[@hythamelshayeb726]

Hi, what is the best version of printers more suitable for dental works

[@wiciuwiciu2783]

8:22 - if my room temperature exceeds 30­°C I'm removing myself from the room.

[@mikejurnak0324]

That's awesome for the price. I thought they where a lot more expensive.

[@RCGirl]

Yeah there is a good sale on these right now.

[@chucksrchabit.7671]

Great video as always.

[@artnutting893]

How much do you charge for a 3D lady to fit a 1 10th scale rc trucks. I love the one you made. But can't afford a 3D printer. Please let me know and keep up the great work. Love your videos. Art

[@nerferx]

This printer isn't a true CF printer as it doesnt have a heated chamber. Its great if your doing PeTGCf or PLACf. But not the best for nylonCF and other exotic materials. The K2+ will be their first real machine that will be a proper CF printer from Creality. Though for a cheap machine, it aint that bad.

[@gk-hg9zo]

Good evening, I am a dental technologist and I am looking for a 3D printer to print dental casts. NO resin! Is there a budget FDM printer (up to €600) that has acceptable quality? If there is a possibility to print my .stl file with different FDM printers (for a fee it would be ideal to choose the right printer).

[@BODALLY]

So what did you do about the bed not been level ??? when the print missed in the top right corner ???. Should the new k1c correct that with auto level ?

[@RCGirl]

It will correct it in the software during printing when the sensors gauge how off it is

[@BODALLY]

@@RCGirl so why did it not do that when you printed that print ?

[@RCGirl]

It needs to be calibrated again and reprinted to see if it fixed it.

[@Bobsdeepthoughts]

You’re awesome! Which software do you use? Have you played with a scanner yet?

[@RCGirl]

I have the new Creality otter scanner on the way 😁

[@dirklewis5518]

super keen to see the scanner in action!

[@TheCalaudio]

What slicer were these tests carried out with?

[@saabnico]

i will probably get this instead of my ender 3 s1 pro :)

[@pauldawson9277]

so when you flip the switch off, it turns on instead?

[@johncarr123]

What slicer do you use?

[@chrisgulick3608]

Is the k1c user interface anymore responsive then the cr10 s smart pro. The cr10 smart pro is dog slow.

[@aleksanderpawelczyk5221]

thnx

[@hedgehogform]

What's the difference between this and a regular k1 max?

[@RCGirl]

Here's a good comparison store.creality.com/blog/k1-vs-k1-max-vs-k1c

[@WhoIsJohnnyLange]

Is this better than the k1 max?

[@RCGirl]

They are pretty much the same except the K1 max has a bigger build volume.

[@Rejken]

Hi, Are you using orcaslicer with your Creality K1C?

[@RCGirl]

I'm not. I went to install it and it seemed over my head. Lol. I couldn't find anywhere with a good explanation or tutorial on how to use it.

[@RCCrawlerz209]

My cousin has a 3d printer where he uses a liquid to print things. Can this use a certain liquid to print things as well?

[@RCGirl]

That's a resin printer (SLA). This is a FDM printer that essentially melts different plastics layer by layer. Resin printers can print in a lot more detail but uses a lot of toxic chemicals. Parts are also more brittle. So it depends on the application, both have pros/cons.

[@RCCrawlerz209]

@@RCGirl sounds good, thanks. 👍🏼

[@Gibsonlife573]

Hey can I ask you a very serious question what did RC do for you like mental health emotionally what does it do for you that made you have the joy that now you can do it everyday I'm just asking because it's really helped me myself personally

[@markloken2465]

@RCGirl Just received my K1C today!!

[@RCGirl]

exciting!

[@jonscot8393]

Printed carbon dust n glue, not actually carbon fibre strands which is the secret, no?

[@kanaalvanNI]

Half of the materials have a hard time sticking to the bed, certainly if the bed cooled down because you ran out of filament or whatever, the other half of the materials stick to hard, if you want to remove prints from the bed you damage the bed,.. That is why you use gluestick/ pva spray,...

[@BC-rc]

That's cool making mini-you's

[@francoisbloodsausage9761]

❤

[@solo-j4v]

This or a p1s/x1c ....

[@RCGirl]

I'm gonna review the P1S next

[@solo-j4v]

@@RCGirl awesome. Thanks very much. :-)

[@RCGirl]

@@solo-j4v They are basically competitors though. Similar specs to the P1S

[@nigel5823]

or you can put is on fluidd so that you can use the on any printer just root it it easy creailty say it avoids warranty that not true doe's not avoid warranty doe's no harm to the printer at all

[@RCGirl]

I still don't know how to root a 3D printer. 🙈

[@khairolshahrilabdrahman9733]

👍👍🇲🇾👍👍

[@mbstudiopl]

drukuje jak ender3... więc nic się nie zmieniło xD

[@floorsweepings666]

looks like a copy of Bambu Labs

[@lolrobin]

Clown

[@TheCalaudio]

ni de cerca

[@lutsifer5847]

That's a bad bambu clone!

[@jamesswin4974]

Hi my name is James and I watched ur channel and I was wondering if you could help me with trying to get my traxxas fixed I have ptsd and I'm on a fixed income I saved for two yes to get a udr and this guy ripped me off and sent me a slider if you can please help me or point me in the direction of some one who can thank you and God bless

[@Peter_Cetera]

The AI cam is just a marketing gag. It doesn´t work at all...

[@enrolsensor1]

Привет из Крыма😛

[@Cereal_Killr]

I have an Ender 3 S1 pro and a Bambu Lab P1S. 3D printers are like salt for any hobby...just makes it better LOL.