If you're interested in the Redcat Gen8 decal set, I have a limited amount for sale on my Etsy: www.etsy.com/listing/1365492451/vinyl-graphic-gen-8-v2-scout-body
@graymatter453 жыл бұрын
I just got a cricut , just started playing around with it. The possibilities within the RC hobby are endless . I would be interested in seeing a video on making the stickers, thanks for your videos.
@odzmakerКүн бұрын
THANK YOU. it's taken me a week to find a proper instruction video !
@RCGirlКүн бұрын
@@odzmaker glad it was helpful!
@fishtailfistscale83623 жыл бұрын
Literally was just in the shop thinking “ for my paint scheme I will need to make stencils out sticker sheets” hop on KZbin and walla. When your subscriptions are Top Quality Thanks Mrs. RC 👩
@billymanilli3 жыл бұрын
Tamiya makes full sheets of "masking tape".. I've found that they work GREAT for doing just that. They come in a pack of 5 for 7 or 8 bucks, and measure around 9.5" x 7" a piece. Cut 'em by hand, or on a "plotter" like in the vid. Hope it helps ;)
@Nordmann613 жыл бұрын
You are good at this! Silhouette should pay you to use your tutorial video in addition to their manual, your tutorial is much better. And your vinyl decals on the car make the car look so good, I will not be surprised if a RC-car company hire you to make decals for their cars! Looking forward to your next video! Cheers.
@ShamirAjate2 жыл бұрын
How does this video not have 100k likes??? Awesome video watching every second.
@nlhpr113 жыл бұрын
Awesome!! Want one !! Want one of them RC Girl decal too.
@ivorpeachey4366 Жыл бұрын
This is the best video I’ve seen . All I want to do is make bike decals. All other videos are for learning everything at once
@bensp11933 жыл бұрын
Huge Thank sharing this. While I look to if device like it and this look amazing.
@ggwbrc3 жыл бұрын
Thanks for share information 👍
@beesod64123 жыл бұрын
I picked up a 3d printer to print my own scale items for my crawlers, Being able to perfectly cut decals made by me would be so sick, it's totally going on the list! Thank you!
@Musicalpa3 жыл бұрын
I so much appreciate your thoughts, ideas and lessons. Toda
@haydenbarrow96033 жыл бұрын
Mannn this was gooood forgot this was a rc channel your like a water spirit
@scottwalsh69993 жыл бұрын
What a great tutorial. Never really thought about making my own stickers...till now :)
@nigelmacey35843 жыл бұрын
Fantastic, have been looking forward to you making this video, very keen on the Silhouette Cameo 4. Thank you, I enjoyed the video.
@wraptgrafix63383 жыл бұрын
Thank you for posting (even though I am yet to watch it) this will save us guys in sign shops telling people why small size graphics are not worth our time to begin with with what we have to charge......
@donharsh54693 жыл бұрын
That's awesome RC Girl 👍👍👍👍😎😎😎😎👌👌👌👌🚗❤️ and I enjoying the video think you
@6oh8rc48 Жыл бұрын
Great vid!!! I'm a tech teacher at a middle school where my students make decals, street signs, and t shirts using a Roland cutter. They love it! I use it to make how to videos for them, but ironically make the graphics to fit on my rigs. Would love to see a printer/cutter to make multicolor decals/stickers.
@6oh8rc48 Жыл бұрын
And since you lost the G, I'll take the RC IRL mistake!!😉
@RCGirl Жыл бұрын
You can do different colors, just use different colored vinyl and layer it
@ferminl.castanedas88053 жыл бұрын
Nice Tutorial, your Videos are 👍 greats!. Fabulous.
@mikenowland27393 жыл бұрын
Excellent presentation 👍
@JeepsCafe3 жыл бұрын
Glad I found your channel because I've always wanted to see how to make my own graphics. Awesome vid!
@ArmanRC3 жыл бұрын
Great machine to make some vinyl art
@gangsterHOTLINE3 жыл бұрын
Solid use for your old Clipper card. I definitely have like 4 in my wallet and don't live in SF anymore.
@ozboy81443 жыл бұрын
Really Awesome 👌I need to look into this
@joesmith42223 жыл бұрын
Excellent Girl. I wonder if you could use a touch screen with a Stylo to draw out whatever you want to cut out?
@rcdrives38823 жыл бұрын
That's awesome. Looks great. Thanks :)
@THEMASKEDMASTER3 жыл бұрын
✌🏻😎🏴I like that you used a silhouette to show off the machine 👍🏻
@divifo3 жыл бұрын
Very nice print upgrade, that do the truck unique! 👏😊
@Musicalpa3 жыл бұрын
Have you heard any buzz about a soon coming Axe Edition V2 of the Redcat Racing Gen 8 Axe Edition? I called them yesterday and inquired about why nobody appears to have any Gen 8 Axe Edition kits. They informed me I can get one from them. When I asked if they're working on a new model of the axe edition, he expressed he can't say yes or no, but he also hinted I may want to wait a little because their might be a V2 coming soon with huge improvements. I tried really hard to get more information on it, but he was only allowed to hunt to the strong possibility of it coming very soon, leaving off by saying to me the Axe Edition is a great RC truck I'll be very happy with, but also stating I'd be very happy with either truck (either being the Axe V1 or the Axe V2). I'm dying to know more. BTW, I also asked if said vehicle was about to be released, would it be more expensive or the same price as the current Axe Edition, and the answer was "The same price".
@TndPnyRCofficial3 жыл бұрын
This is something I need to have. I want to make custom decals for my RCs
@jimmylarsen6338 Жыл бұрын
Hi very cool video - I didn't even know you could buy such a cool machine. I'm into Mini-Z RC and as you properly know the body's of the cars is pretty small. I've been searching ALOT for all the sponser and logo decals that's typically on for example LeMans cars that I could buy. But know I can make them myself with this. But before I start buying anything I was wondering what your experience is with the thickness of the paper you print the stickers on. I'm asking because Mini-Z car bodys need to be painted and have the stickers applied on the outside of the car, and if the sticker paper is too thick, it's not going to look great on the body's for such small RC body's.. Could you share your experience and tips on that? Thanks again for the cool and informative videos
@chrisweihe95983 жыл бұрын
Excellent video and information along with tools needed and tips.
@marcowilke92203 жыл бұрын
Thank you for exlaining this great machine. Think i have to buy a cameo too 😬😉 Next sticker for my heli 😉
@wesmadebuilds6813 жыл бұрын
An interesting machine. I use the Cricut but I can see the benefits of this one and it’s design tool. They do a great job for paint masks as you mentioned.
@Fotomotion_garage3 жыл бұрын
So cool
@pb-bx1ll3 жыл бұрын
Great video. Thank you!! I also would like to see one on your stickers
@Chilliwacka3 жыл бұрын
Great video as usual, where can i get the mountain silhouette vector graphics?
@ddrc013 жыл бұрын
I love all of your videos. Great work.
@albertoestrella50982 жыл бұрын
Hello ' Great job but I have only one question can I make my own decals , Using this silhouette cameo 4 You know using The water slide decal white or clear decal paper size for scale models like 1/72 scale or what is the best silhouette cameo 4 machine to use please let me know trying to find out which one to buy for making my own water slide decals white or clear paper sheets
@johnwisniewski578611 күн бұрын
Not sure if I should get this one or the Cricut.
@Wurstkommission3 жыл бұрын
Very interesting and helpful! 👍
@HobbysRCHobby Жыл бұрын
what type of vinyl would you suggest for RC's, a permanent or removable?
@andyeve83 жыл бұрын
Fantastic attention to detail. Thank you for taking the time to share your information.
@cyrilrcracing3 жыл бұрын
Good video.
@manofthetreez3 жыл бұрын
Great video! You mentioned at the beginning that you can cut vinyl for paint masking. would you use the same vinyl to do this?
@patrickh45403 жыл бұрын
Well explained. Big weeeee.
@benzlick3 жыл бұрын
Awesome! Do you know anyone who sells mountain graphics like this for rc vehicles? I don't really want to buy the equipment but really would like to apply graphics like that to my Axial Jeep Gladiator
@RCGirl3 жыл бұрын
Hey! Just seeing this comment. I sell a limited supply by request if you're interested. Reach out to me via email hayley@thercgirl.com
@robalrobal38613 жыл бұрын
wow I was looking for this! MEGA Thanks
@Livlifetaistdeth3 жыл бұрын
That looks fantastic!
@kjs64693 жыл бұрын
Do you plan on selling the mountain silhouette that you made for your rc?
@woppaenginerring3 жыл бұрын
I have a vinyl cutter however I feel artistically challenged when it comes to designing things to cut. Basic words no probs but trying to draw that mountain Silhouette looks interesting. How do you do it? Software etc?
@WoodsUnknown3 жыл бұрын
Thank you so much for sharing I love that decal you made great job.
@DJhunta Жыл бұрын
What a great detail vid thanks.
@JudeSturman3 жыл бұрын
Did you cutout the stickers with pictures on the silhouette too? How did you determine the exact sizing to fit your truck? Seems very involved!
@RCGirl3 жыл бұрын
Yep I cut the stickers with the silloutte too using the print and cut feature. You print a design through the software on an inkjet printer and it prints markings so that your machine knows where to cut out around the design. For sizing, I just measured the body panels using calipers and made the vinyl pattern a bit bigger than needed. I just trim any overhang with a hobby knife. Hope that helps!
@JudeSturman3 жыл бұрын
@@RCGirl Cool, I didn't see a way for the machine to tell where your graphics were for cutting. Super helpful!
@eckos23103 жыл бұрын
Can you please make more video like this one please.
@Lalala007full3 жыл бұрын
This awesome, thank you for sharing🙏👍
@mordantly2 жыл бұрын
Have you run other materials with this model cameo?
@RCGirl2 жыл бұрын
Just vinyl and craft paper. I know it can also etch on plastic and cut balsa and felt with different blades, as well as do intricate designs with pens, but I haven't tried that yet.
@cdgarrett12 жыл бұрын
I need graphics for my plastic Ascend D10 kayak. I haven’t been able to find someone to do it and thought maybe I could do it myself if I learn how and the equipment isn’t too expensive. You look and act very familiar. Do you have a brother who also does KZbin videos?
@jeffquast5162 Жыл бұрын
love your videos im new with my cameo 4 and planning on using mostly for rc car stuff and have a question for anybody need some help figuring out how to slant door numbers on rc car, i can figure out slanting letters but maybe some number fonts you cant do this with any help would be appreciated thx jeff
@jlgibson19833 жыл бұрын
I do have a preference question, I commented on a previous video about me making a decision on which trx4 chassis I'd purchase, but it seems the scout gen8 v2 is making a statement. Which would you choose over the other and why, and some plus and minus in your opinion. Love the detail in your videos btw!
@RCGirl3 жыл бұрын
If budget is a consideration I'd get this one for sure. I'm really happy with my Gen8. But with the TRX-4 platform you can pick which diffs you want locked/unlocked, which is nice. It feels like higher quality plastics as well, with a decent amount of body options. I think you'd be happy with either.
@jlgibson19833 жыл бұрын
@@RCGirl awaiting my defender already! Thanks for the reply!
@jonathanockwell76773 жыл бұрын
Great video. I had tried playing with the software before and got frustrated. This helped a ton! How easy do you find it to find graphics you like and if needed go about buying the rights to use them?
@RCGirl3 жыл бұрын
Thanks! I usually search Etsy or design bundles website for .svg vector graphics. Pretty easy to find stuff. Lots of other sites as well
@agp70733 жыл бұрын
Great video. Subscribed
@tdiggleshobbyking13813 жыл бұрын
That looks amazing
@kevinbreaker26833 жыл бұрын
So very awesome Great job love it😁👍
@Just4FunRC3 жыл бұрын
was looking into this for stickers and small vinyl. Cricut had alot of returns latley dunno why. Can i laser print my motive then cut it aswell, few mm out from the edges?
@RCGirl3 жыл бұрын
I think cricut started charging a monthly fee.
@Just4FunRC3 жыл бұрын
@@RCGirl ouch, cameo it is then,also the huge roll support :D. Thank you RC Girl.
@jspeedrc3 жыл бұрын
Great rc channel 👍🏼🇫🇷
@MotoFamMayhem3 жыл бұрын
That awesome... We have a Cricut and it's so handy 👊😎
@hemitj3 жыл бұрын
Thank you for a great video!
@RelatableRacers3 жыл бұрын
Hi rc girl! I have been a viewer for a good while now and just wanted drop in and say hi!
@RCGirl3 жыл бұрын
Hi!
@raylansall44343 жыл бұрын
That was very helpful 😊
@S40TBS3 жыл бұрын
Awesome 👍👍👍
@rcpd31573 жыл бұрын
Great job!
@johngrant13373 жыл бұрын
Great video
@BenchRacerRC3 жыл бұрын
the test cut is supposed to remove the square and leave the triangle
@copegirl882 жыл бұрын
Where did you get your graphics?
@RCGirl2 жыл бұрын
Google search 😆
@copegirl882 жыл бұрын
@@RCGirl gotchya 😉
@Dany-oj2jv3 жыл бұрын
Love it! thank you very much for sharing... like ;-)
@NCmountainsYouTubeChannel3 жыл бұрын
Cool cool 👍
@erickwangu92392 жыл бұрын
Nice
@TrailFeatures3 жыл бұрын
I still don’t _need_ this. But I still *want* it...
@kellykuretich63663 жыл бұрын
😁😁👍👍
@NANNIRC3 жыл бұрын
fantastic, thank you very interesting and BRAVA (perhaps you know bravo, brava is femminine)! Ciao Nanni