Create Smoke Puffs Fast (Blender Tutorial)

ConciergeRender: www.concierger...
2nd channel: / @defaultcube
Patreon and stuff: www.patreon.com/cg_matter
I teach you how to make smoke puffs in blender (procedural muzzle flashes coming up next) :)

[@AMSASH]

3 minutes?! I want to watch a tutorial not a documentary

[@neoxu7881]

almost 4 minutes actually

[@cringerirgendwas7288]

Was Just about to comment that

[@johnw3194]

Damn that was a dope comment.

[@victorstergaard2767]

More like 2 seconds

[@Light-mt6fi]

this tutorial is not for beginner...🤘

[@-Knave]

FootageCrate has been devastated

[@CGMatter]

so sad

[@unflexian]

more like FootageCube HA

[@hugoantunesartwithblender]

@@CGMatter You were mentioned at Blender page, congratulations ;) www.blender.org/press/blender-top-16-highlights-of-2019/

[@ProductionCrate]

completely

[@thisismyusernamesoihopeyou6069]

@@ProductionCrate lmao

[@yousefnashwan3366]

Ahh.... Finally a full complete tutorial.

[@carbonx95.08]

Hell yeah

[@itachi2011100]

Third of the whole tutorial is just sponsored message, and even That isn't too long. I love this channel!

[@khaledalkarmel6517]

Merry Christmas and Happy holidays. thanks for being there for us.

[@Alumx]

holy cow I never knew that you can sim smoke from particles thanks CGMatter for enlighting my mind all over again

[@CGMatter]

no problem :)

[@HyperDash]

Alumx always beating me to the CGMatter tutorials

[@DanteMoraes]

Usually, I speed up the tutorials in the video settings. For this guy, I slow it down

[@Cyanidedan]

Declare bankruptcy on the default cube

[@EdLrandom]

I basically watched your video by hovering a cursor over a thumbnail

[@CGMatter]

XD

[@kendarr]

This isin't related but.. do you always use clothes that are a lot bigger then you??

[@borjonx]

On Linux his shirt renders even larger..

[@viharcontractor1679]

For every default cube he tortures he loses a little weight as a price to pay.

[@megamaz108]

than*

[@kendarr]

@@megamaz108 boy that certainly answers it, I probably got something wrong in the response too

[@retrodragon2249]

@@borjonx and faster

[@dlfon99]

I'm using the 2.82 and this has already been outdated by the inclusion of Mantaflow into the master branch. This means all these volume settings are different now.

[@Iexplode21]

Jeezus Christ the amount of tutorials this man is pumping lately. You are awesome but take a break when you can!

[@kraizer2484]

The feeling that i understand your explanations clearly in a matter of minutes. it astonishes me

[@jpthrash]

Loved this Concierge Render tutorial, the smoke bit was also good.

[@xanman6334]

HOW ARE YOU RENDERING THE FREAKING SMOKE

[@Jeppz85]

Haha love the comedic energy! Great tutorial

[@lovelife8360]

I Never Thought I Could Find Tutorial Like This Thank U Man U Save My Time .

[@HalFastIndustries]

I love this man's humour

[@formyfriendsofficial]

If anybody else is having trouble with this - dont use particles and simply keyframe animate "Surface Emission" under "Flow Source" tab from a higher value to 0 Thx @CGMatter for the tutorial!!!

[@MasekFilip]

I will pay you real money to make like a full training series for smoke /fire in blender... You're the one one who I can watch at 1x speed

[@shadybandit7]

this kinda stupid because youtube have multiples smoke and fire tutorials

[@idoaharon2943]

the best f-ing youtuber of all time

[@koktszfung]

Hey don’t push yourself too hard when managing two channels at the same time, I am worried you will burnout soon

[@CGMatter]

I'll make sure to not go too hard

[@sidhadhbinu560]

bro we need more like this

[@BertVerhelst]

could you add a plugin to show what shortcuts you're pressing. this would really help following these tutorials

[@readyforlol]

Yeah, i'm stuck at the "run the quick smoke command" step because i have no idea how he opened that text field in the middle of his 3D viewport.

[@ygstudios8718]

@@readyforlol You can press F3

[@AdamBechtol]

Woot! Yay, first video i've seen, gotta subscribe. Super job, looking forward to learning to do so much more.

[@iansteele8644]

That was BRILLIANT! Obviously not a tutorial for bare bones beginners but i understood all of that and I've only been at this a few weeks now. Take a sub good sir!

[@ATOMVISUAL]

Oh shit this intro😂😂

[@activemotionpictures]

Marvelous! The integration with Concierge, sold it. Thanks!

[@saftschinken2353]

I love your transitions to the sponsorships

[@chutas]

Your channel is one of the most useful things that I could find.Thanks dud

[@suspiciousstuff4999]

i really like how i came to know what values of those stuff do in 3 min tut than a full tut by others. ggwp

[@lalamax3d]

best tutorial in world. thanks for creating art (such strong creative talent)

[@derekw8039]

Oh, now I see why I keep confusing this channel with Default Cube in my head!

[@TheMetaface]

Gonna have to put this one on 2x speed, tad too long for a tutorial. Also thanks for talking about those other settings, most tutorials just do a basic smoke sim and it looks completely fake, but that smoke puff was on point 10/10.

[@_Plutonic]

what ever u do dont use the sponser thing. they make it seem like its much more cheaper than it actually is

[@KingKong19100]

*THANK GOD!* SheepIt has trouble rendering smoke simulations, and this other website charged nearly $1K for my animation that was 20 seconds and had a smoke sim in it.

[@TetriTek]

0:57 Honestly, I thought you ended it right there and I just... thank you for that.

[@Warhamer116]

Consergience is pretty good service imo. Since I have only one computer and it's (only) 7 years old at the time of typing, it's pretty nice to be able to outsource final rendering to someone or something else specifically since overnight rendering gets you only so far when one frame in animation at full resolution takes literally 30 minutes to render and sometimes decides to crash. Plus the rates aren't really even that bad, considering how you'd need to get second powerful computer to get anywhere close to the same speeds and that can cost thousand(s) of dosh.

[@giwake]

cool and good

[@kbbk.studio]

Thanks for that one, I remember guys from Quixel used Houdini for generating mattes of dense fog for their short film “Rebirth” in similar manner and was wandering if blender can do that and OH BOY HE DID IT AGAIN i don’t need Houdini 🖤

[@switchman9173]

Yeah..subscribed the default cube channel.😊

[@degativenelta]

Nice

[@jamado9067]

if you want to preview your smoke: 1) Go to the cache tab on the domain 2) Under type select: Modular 3) Under "End" put in a value like 50 or 80 a) This will be the amount of frames it will smoothly preview 4) Under the Settings tab click bake 5) Wait until it is done 6) You can now smoothly preview your smoke

[@lucasdalmasso8559]

You 'r just a god ,thx!!!

[@brightgarinson3099]

Shots fired at my boys, Footage Crate. "It's treason then."

[@ProductionCrate]

we did not start this war, but we will not lose it

[@JonathanKron]

The ProductionCrate joke really got me ;D, great tutorial!

[@ullinator]

I knew this since my first year blender but still had to watch it line 3 times

[@arnav6808]

listen, you might not know this but you are god.

[@pesterenan]

I'm so used to these ending early that I really thought the tutorial ended that minute. xD

[@zogoloov4313]

awesome keep it up bro

[@Sam-hd7iy]

CG lives matter

[@WarriorOfHonor16]

If anybody is using 2.93 and is fighting the smoke not following particles or simply generating in the middle of the domain after trying all these steps, try toggling Adaptive Domain on and off. I'm not sure if this is a bug but holy cow that was driving me nuts!

[@absencedev]

When he said bye bye, I was like oh wait that's it? 😂

[@vsanims]

There is no smoke option in my physics tab... What should I do

[@Shubham-fk5oq]

Use Houdini FX option

[@qubitx64]

Bravo Six Going Dark.....

[@letterborneVods]

A second channel??? So that‘s where that fifth part of “I already forgot but something with motion or cameras” went! 😱

[@georges8408]

nice tutorial (even if it is difficult to watch it) thank you.... BUT for larger project, simulation in blender is a complete headache. It might take more than 1 hour only to bake a larger project, so Blender need to improve performance here somehow. Looks like Embergen software has managed to do the same simulations in real time..why not Blender ???

[@RSpudieD]

Very nice!!

[@ahmad1080p]

Was waiting for that 😍😍

[@kakakabeatz]

Finally a lil ASMR

[@Incogneeko]

Fantastic work man. Can we get a similar tutorial, but for liquids/blood splatters? When youre showcasing the differences in settings can you also put them side by side, maybe loop a lil so we can really compare? Just lil ideas. Thanks!!

[@pile333]

Perfect for 3D gun boats.

[@Zi7ar21]

*TACTICAL NUKE INCOMING*

[@scottjohnnyhelgemoaune2951]

Ooooh shiiit! Like number 1000😎

[@pritishism6429]

if eminem uploads blender tutorials

[@sagar1526]

bro i swear you can make a rap song with this tutorial lmao

[@hemaangbhatia7874]

is anyone watching at .25 speed?

[@Kate-Tea]

TACTICAL NUKE! INCOMIIING

[@AllExistence]

So... What does ad companies say about their ads being really really fast too? 😂

[@jafarsadiq6226]

Thankyou so much very helpful

[@taebae2862]

Ok, I love your video formatting but I'm a bit lost. When I went to change the settings in 'Particle Properties' The box has "ParticleSystem" but the drop-down setting, right above Emitter, says ParticleSettings. Whereas on your screen both say ParticleSettings. Also, when I went down Physics Properties, I have a box that says "Fluid" with a camera and screen next to it whereas yours says "Smoke". and instead of mine saying Flow Source, it says Flow Behavior without any mesh or particle system options on the drop down. Can you PLEASE help me, it would mean the world.

[@fidstar9956]

speed level over 9000. ^^

[@deadknifeee]

Missed opportunity not to have some effects like this after you nuked the cube ;)

[@piotao]

Hey, where did you set up smoke source as particles? Was that DLC or some hidden content for patreons? WTF? Who are me, who are you? :D

[@kolupsy]

Better watch a Corridor Crew Guide on muzzle flashes before the next video comes out

[@Tantagotantago10]

how the heck did u get the smoke to emit from the particles....

[@regeleionescu935]

It does not work in Blender 2.82 at all but works fine in 2.81. Great tutorial, by the way, thank you!

[@KingKong19100]

Does the smoke simulation add to the charge of the render drastically based on file size alone? Or does it all boil down to how long the shot takes to render?

[@stefanbachrodt7072]

I bet I'm not the only one who went to check that "playback speed" is in fact set to "normal" =D

[@MoukhaSR]

CGMatter vs IanHubert

[@Micromation]

Speaking of smoke... any tips how to make smoke first expand rapidly (like an explosion) and once filling the space, slowing it down to "normal" speed? Also, is it possible to affect such smoke screen in Blender with objects? Let's say I want to throw a ball through a wall of smoke at high velocity, in reality I imagine that air pressure around the ball would push the smoke aside creating circular hole where the ball was passing through while also on the exit side smoke would follow the ball trajectory slightly to create somewhat of a cone, before dissipating. How would one approach such simulation, if it's even possible in Blender at all?

[@Quarkburger]

Is youtube charging by the minute now?

[@erik....]

I had no idea I had epilepsy until this video. Btw Mantaflow is replacing Blender's current fluids in 2.82..

[@blender3dartist170]

MYYYY BRAINNNNNN!!!!

[@AtocStowwe]

shadow realm the default cube

[@arthuredens]

When I was young I wished tutorials went this fast. Now I'm too old to keep up.

[@JoaoSilva22222]

We need a decent tutorial on this topic, taking the right time to explain everything..., not rushing like crazy, unfortunately it didnt work on blender 3.0.....i wish i could do it on 3D way faster, but i had to do it on after effects. Anyway, thanks for trying!.

[@marksevastipol1946]

When he said tactical nuke I felt that.

[@ianriccillo3806]

I really like your fast paced style and your examples of what each value does. I felt like I genuinely learned instead of just copied

[@GameDevAraz]

Nice!

[@skreamz3372]

Me:- after applying the resolution at 130 My computer:-do u want me to get explodes

[@abiyyupanggalih854]

hi anyone...:)

[@behrozkhan237]

Hi

[@insideman7501]

Hi

[@rustyexe9378]

Hi there

[@lukas_g243]

Hi

[@suspiciousstuff4999]

Hi

[@sukalpashrestha61]

i thought this was a long tutorial when i realized half of it was sponsor ad

[@aydrienrod4998]

A tutorial that you can only understand just when you already now how to do it.

[@곽준태-q3w]

Thats why he made a slower video

[@emimeemio]

Nice video! :) Basic smoke in Houdini - tutorial ~40minutes / Blender under 4minutes :D

[@Dominik-sn5rj]

Missed a chance with setting the Resolution Division to 420 and saying "I like to keep it like that"

[@behrozkhan237]

0:54 Who thought the tutorial ended?

[@patrickedwards2078]

im like thats crap - but nah it turned out good

[@TheNewton]

@CGMatter 0:06 not action essentials but in the current humble bundle of filmmaking tools it has actionvfx stock footage for smoke ,and debris, you can get it for a $1. Bigger smoke explosions in the bigger bundle. If get the larger bundle try out actionpro, be cool to see if there's use cases for blender.

[@ronsn8071]

You better watch out, you better not cry. You better not pout, I'm telling you why MantaFlow is comin' to town MantaFlow is comin' to town MantaFlow is comin' to toooooooown :D

[@AsianRestaurant_80s]

lol not funny.but the funniest thing is only 1 like.u liked your own comment

[@Theaddekalk]

i can't cache and bake mine,what am i doing wrong. i follow all the instructions to the letter? and i dont have volume info in the shading, is it an add-on? edit, i managed to bake it when i restarted blender. but the volume info?

[@naorl8866]

Where can I find the full video from the shower