Creating A Triangle Feature Ring Wood Turning

[@Poor_Mans_DIY]

Completely fascinated to see how this is going to work out!!!! 😄

[@spindlesworkshop9744]

Thanks for watching It dosen't work out as well as I hoped

[@SteveC38]

Very Cool Luie!

[@spindlesworkshop9744]

Thanks Brother 👍😎

[@carolriley8472]

Nice feature ring...can't wait to see it in a bowl!

[@spindlesworkshop9744]

Thank you so much! Your support and kind words are always appreciated 😎👍

[@ArtorLifeTorB]

Nice looking ring👏great project 👋fantastic job 👍👍👍

[@spindlesworkshop9744]

Thanks!

[@ThePapa1947]

That is a great looking feature ring Luie. Also a nice job of explaining and showing how it was done. Looking forward to see it on the completed project. Gary

[@spindlesworkshop9744]

Thanks Gary, Liked your latest post also. I am still planning on doing the tumbling blocks this summer👍😎

[@alinmayerthorpe7801]

Lovely feature ring Luie, now we need to see you featuring it in the project you are making! Cheers Al

[@spindlesworkshop9744]

Thank you! Yes hopefully I will have some footage of the upcoming project by next weekend 👍😎

[@markfishburn8284]

Very nice start to a vessel. Thank you for sharing your video.

[@spindlesworkshop9744]

Thanks Mark, Your continued support is greatly appreciated 👍😎

[@annetteackley9048]

Interesting on how you designed your ring. Looking forward to seeing your big project using your feature ring!!

[@spindlesworkshop9744]

Thank you! Hopefully I can get some more done this weekend.

[@DougMilleratWoodSpunRound]

Pretty cool ring. Looking forward to seeing what you do with it.

[@spindlesworkshop9744]

Thanks Doug, Really appreciate you stopping by and commenting 👍😎

[@BobAmarant]

Cool glue up, can’t wait to see the entire project!

[@spindlesworkshop9744]

Thanks for watching and commenting 👍😎

[@jackthompson8019]

Great work Luie.

[@spindlesworkshop9744]

Thank you Jack! so glad you stopped by and commented👍👍

[@mountainviewturning5319]

Looking good 👍

[@spindlesworkshop9744]

Thanks brother 👍😎

[@rickchapman3051]

While your not trying to give explicit details on how to do it. You do great work. I understand the fine line of liability thank you for really taking the time to show us how you do it. I've never made a segmented bowl but your videos give me ideas. Thank you.

[@spindlesworkshop9744]

Thanks for watching and commenting 👍😎 I feel my channel is more of an entertainment channel and not a how to. Although I have been known to throw in a few ideas and tips from time to time

[@TheMessyStudio]

Looks cool, Luie! That'll make a a nice bowl.

[@spindlesworkshop9744]

Thanks Billy

[@Bramsshed1913]

Brilliant job Louie , looking forward to see this on the next project! Cheers, Bram

[@spindlesworkshop9744]

Thank you so much Bram!

[@deadwoodcastingturning]

Great ring and explanation

[@spindlesworkshop9744]

Thanks so much for watching and commenting, your support is greatly appreciated 👍😎

[@lakeshorewoodturner5136]

Can't wait to see it finished.

[@spindlesworkshop9744]

Thanks so much for your support 👍😎

[@woodturningwithDave]

Great looking ring Luie, love it

[@spindlesworkshop9744]

Thank you for your support and kind words 👍😎

[@bruceobrien2862]

Looks good Loui

[@spindlesworkshop9744]

Thanks Bruce! Hope all is well with you.

[@RayWhitbyCreations]

Great start to the project Luie. Looking forward to seeing the rest! All the best. Ray

[@spindlesworkshop9744]

Thanks so much for your support and kind words 👍😎

[@radarthewoodturner8912]

Great explanations can't wait to see the finish keep turning stay safe👍👍👍👍

[@spindlesworkshop9744]

Thanks my friend

[@AndysCornishCreations]

Hi Luie... really cool feature ring... it's a lot larger than I was expecting.... that's going to be a big bowl or vase... great explanation and video... take care...All the best.....Andy

[@spindlesworkshop9744]

Thanks Andy. It came out a little bigger than I started out to make it because of how I had to cut the angle to make it work

[@tfturning]

Great video Luie, always cool to see your segmented pieces coming together! 👍

[@spindlesworkshop9744]

Thank you for your kind words and support 👍😎

[@BAILEYWOODWORKS]

Looks great luie!

[@spindlesworkshop9744]

Thanks!

[@jlyssagraywolf7503]

Good job 💜💜💜💜💜

[@spindlesworkshop9744]

thank you!

[@Sunflower-ik5oo]

Very nice!

[@spindlesworkshop9744]

Thanks!

[@OurFrenchHouseRenovation]

great work, subscribed to dan thanks for sharing... cheers

[@spindlesworkshop9744]

Thanks for your support and kind words. 👍😎

[@gregj2647]

Nice feature ring. Looking forward to seeing the rest of the vessel. A couple of suggestions. Instead of using wax paper, get a cheap silicon baking sheet. Washable and reusable. Also, when cutting the segments, I always use a stop block so the pieces are consistently the same size. I also make a few extras just in case one doesn’t get cut right. Keep on turning!

[@spindlesworkshop9744]

Greg, Thank you for watching and commenting your support is greatly appreciated and those are some great suggestions 👍

[@kittysushi4402]

Greetings from California 👋🏻 You're very creative and talented. Amazing work 👍 Have a great day. Stay safe 🦋💞🌸👍

[@spindlesworkshop9744]

Thank you so very much!

[@AllenOxendine]

Thanks for sharing, interesting process. I’ve only tried one segmented bowl. Considering, it turned out ok for my first attempt lol. Full View and Like 👍

[@spindlesworkshop9744]

Thank you so much for watching and commenting on this video 👍😎

[@hbwoodturning17]

Hello Luie good start to a project I love to see how you do the rest of it. Cheers, Hans Stay safe and keep turning

[@spindlesworkshop9744]

Thank you so much for watching and commenting on this video 👍😎

[@TheTinyWorkshop]

Very nice Luie. It looks very accurate. I am curious about the vase. 👍Frank.

[@spindlesworkshop9744]

Thank you for watching and commenting. I hope to have some footage of the case by next weekend 👍😎

[@GordonRock1]

Great feature ring, Luie, and awesome explanations. Someone else did one similar to yours recently and I think I like yours better. 😃😃😃 Looking forward to seeing the vessel you use it for! Nicely done, buddy!! 👍👍👍👍

[@spindlesworkshop9744]

Thanks! Yeah funny how great minds think alike.

[@DIMTips]

Nice break down.

[@spindlesworkshop9744]

Thank you👍

[@wheelsdan]

Thank you so much Luie ... that was really kind of you .. I love the segmented idea and that feature ring will look stunning mate I definitely need to get a chart like that as I don't have the brain power to work out the angles lol 🤣 I cant wait to see this on a vessel mate ! Great job and thank you again

[@spindlesworkshop9744]

No problem my pleasure, I hope it gets you a couple of sub's.thanks for watching and commenting on this video 👍😎

[@BlueyPastle]

Awesome work Luie, so much effort. I do like how you glued the up and how accurate your cut were. I would have to do this by hand, so no thanks... So looking forward to what you do with this and how it comes out. Keep on turning. Cheers, Bluey 👍

[@spindlesworkshop9744]

Thanks so much brother for watching and commenting your support is greatly appreciated 👍😎

[@SiamWoodShop]

Great looking ring Luie, I think maybe you and Gord Rock have put your heads together :-) Stay safe

[@spindlesworkshop9744]

Thanks for watching and commenting. Yeah I watched Gord's video while I was waiting for some glue to dry and thought look at that! Funny how that happens sometimes. Hope Gord is not upset with me 🤓🤔

[@RadioFaceWoodWorks]

Nice...you and Gord Rock had the same idea this week😀stay safe...press on buddy😎 Joe

[@spindlesworkshop9744]

Thanks, yeah when I saw Gords video earlier today I was like...man great minds think a like👍😎🤣 Your support is greatly appreciated!

[@TournageDubois]

Great ring, and was interesting to see your process! Once I'm in the new shop, I'm hoping to do some segmenting as well!

[@spindlesworkshop9744]

thanks ! how much longer do you expect before your into the new shop?

[@TournageDubois]

@@spindlesworkshop9744 I am hoping to be up and running in 2-3 weeks.... getting excited for sure!!!!

[@spindlesworkshop9744]

@@TournageDubois awesome can't wait to see the opening video!

[@TournageDubois]

@@spindlesworkshop9744 me too! Probably do a few videos out of the build steps, so next week will be the build and quick explanation, then walls and electrical/dust collection, then painting and setup/tour.

[@spindlesworkshop9744]

@@TournageDubois sounds cool I will keep an eye out for that

Hello my friend. Again, new labels in the workshop. You will soon become the tag king. Would you like to exchange tags with me too? Your woodwork is great again. You have created a beautiful custom ring. congratulations. See you. stay healthy and happy. Big greetings. Mehmet.

[@spindlesworkshop9744]

Thanks so much for your support and kind words and yes I would be proud to trade stickers with you. Luie PO BOX 745 Kenilworth NJ 07033 USA

@@spindlesworkshop9744 Dude, I have to give you information and address for the label job. Can you write me your e-mail address?

[@spindlesworkshop9744]

@ [e-mail]

@@spindlesworkshop9744 dude I sent you an e-mail. Can you check your mailbox?

[@RubenWoodcraft]

nice work. next up an air balloon? lots of segmenting in that :)

[@spindlesworkshop9744]

Thank you! An air balloon has crossed my mind more than once

[@rickchapman3051]

Wheelsdan is awesome

[@spindlesworkshop9744]

Yeah! He is.

[@gtmafamilia2168]

que massa muito bom...

[@spindlesworkshop9744]

Thank you👍😎

[@mpart_woodlathe-stuff]

Well Luie, can the vessel out shine the job on this ring ? We all want to know ! Thanks for sharing🙏 Stay safe. -Mike😷

[@spindlesworkshop9744]

Thanks! Hopefully I can get some more done this weekend. 👍😎

[@فائزهالشاقي]

ورشة عمل حضرتك معلم مهنه روعه

[@spindlesworkshop9744]

I hope that's kind words👍😎

[@fredtaylor3322]

Well done with the accuracy. What would two of them stacked look like with one upside down.

[@spindlesworkshop9744]

Thank you, Great idea probably get a diamond shape🤔👍

[@davidhenry7585]

Is that plastic wrap around the big hose clamp holding the ring tight? Very enjoyable video!

[@spindlesworkshop9744]

Thank you! I don't use anything around the house clamp. Are you talking about the wax paper underneath? I use that to keep the ring from sticking to the bench. Thank you so much for watching and commenting your support is greatly appreciated 👍😎

[@TurningsbyTurner]

That looks like it will make a nice future project. Sorry to hear about your lathe!

[@spindlesworkshop9744]

Thanks she is up and running again. Now I have to play catch up

[@WoodenItBeNice]

Hi Luie, Fantastic feature ring and a brilliant explanation on how to make it. I watched Gord's video yesterday. As you said great minds think alike. Where did you get your segmenting planner from? Loved this video Luie and I have subbed and hit the bell for Dan's Channel. Take care my friend. Cheers, Huw

[@spindlesworkshop9744]

Thank you Huw, Yeah I watched Gords video when I was waiting for glue to dry on my project and I was like look at this☺️🤔 funny how that happens sometimes. Hope Gord is not upset with me.

[@spindlesworkshop9744]

I found my chart @ WWW.spacecoastwoodturners.com