Creating Force Motors with Creo Dynamic Analysis

[@jaroslav4660]

Great explanation thanks for sharing

[@DineshKumar-kj6jc]

Wonderful video😍

[@dilshanchrishantha6548]

well explained video.thanks

[@D.I.Y-Home]

Hii, can you tell me that how to calculate the net load of any mechanism which contains the springs?

[@4kside]

Here is the theory (I do not have experiences in this, sorry) Calculating the net load for a mechanism in Creo containing a spring involves determining the forces acting on the mechanism and considering the force exerted by the spring. Here's a general process: 1. **Analyze the mechanism:** Understand the geometry and kinematics of the mechanism in Creo. 2. **Identify external loads:** Determine the external loads acting on the mechanism, such as applied forces or torques. 3. **Consider the spring force:** Determine the force exerted by the spring based on its stiffness (spring constant) and the displacement of the mechanism from its equilibrium position. 4. **Sum forces:** Sum up all the external loads and the force exerted by the spring to get the net load acting on the mechanism. 5. **Check equilibrium:** Ensure that the net load calculated satisfies the equilibrium conditions for the mechanism. 6. **Implement in Creo:** Utilize Creo's simulation or analysis tools to input the calculated loads and analyze the mechanism's behavior. Remember to consider factors like friction, inertia, and any constraints in the mechanism that may affect the calculation.

[@D.I.Y-Home]

@@4kside actually i am doing this in the mechanism which contains one torsion and one compression spring, but when i am calculating the net load on the rotation Axis ,its only showing the torsion spring torque

[@4kside]

Hi, maybe will be better to ask on PTC university web page...over here is the much more experts and maybe they can help you. I am not familiar with that as mentioned last time. Thanks for your understanding.Vladimir

[@usmanahmed5842]

How can we apply custom load in creo parametric motor function???

[@4kside]

Thanks for your question. Please check previous tutorial where I have explained different types of loads

[@4kside]

kzbin.info/www/bejne/oKmunpKDraiYlck 8 Ways how to define servo motors

[@sandeepkhiroliya3017]

What is the difference between servo motors and force motors in creo para?

[@4kside]

The servo motor is defined by translation/rotation in degree per seconds and Force motor is defined as a force - in Newtons.

[@adhithasimhanraghavan7516]

Is it possible to get stress values in the arm due to applie torque?

[@4kside]

Hi, try to check this tutorial (transfer loads to Creo simulate) kzbin.info/www/bejne/g5e6aH59hdGAjpI

[@adhithasimhanraghavan7516]

@@4kside Awesome! ❤️❤️😍😍

[@nvcworld6423]

Can we do crank balancing in creo?

[@4kside]

With Behavioral extension you can make case study analysis / Sensitivity + Feasibility/Optimization Analysis - I do not have these licenses anymore > I can not show you.

[@nvcworld6423]

@@4kside thanks for your valuable reply , I just wanted to do a simple vibration analysis of inline single cylinder engine for study purpose , if you have any material please provide me and even I need your guidance too ❤️❤️❤️❤️

[@4kside]

@@nvcworld6423 Sorry - I have used these features a long time ago - not remember the details. Please try to ask on www.ptcusercommunity.com/

[@nvcworld6423]

@@4kside thanks for reply , I don't think anyone can help me in this

[@4kside]

@@nvcworld6423 I think that if you need simple vibration analysis - is necessary to find somebody with these experiences (uff, I would like to help, but I do not know somebody with this experience)