Creating Incisal Edge Effects on Monolithic Veneers and Crown

Visit the Klim Institute for CEREC online and hands-on training resources! bit.ly/2Xaz19F​​​
This video conveys a product and technique for creating incisal edge effects on a monolithic ceramic crown or veneer.
The Klim Institute is an education platform for CAD/CAM dentistry.

[@andyjardine8192]

Great stuff thanks for sharing your knowledge, the Miyo looks like an excellent system. I currently use the Noritake FC paste

[@bennymalkhazdavidashvilly9635]

very nice

[@parnierstudio1031]

Интересно! Hello from Russia, very interesting video. Thanks for the help!

[@alissnohili3985]

Beeeeeeautiiifulllll🙏

[@marcuszujev7409]

Great video, thanks a lot! :)

[@KlimDDS]

It is a great product!!!

[@dentistfelix]

Thank you for the really good video! May I ask you what the program is for the Emax before staining and also after staining of the oven?

[@KlimDDS]

Use the Ivoclar recommendations for crystallization (found on their website) and then the MiYO recommendations by Jensen, can be found on my website blog www.cadstar.org/blog/miyo-glaze-and-structure-firing-chart

[@billkinzler3773]

Can you review the structure porcelains and texturing. I have been using Miyo on Emax and would like some firing settings for both stains and structure. Thanks

[@KlimDDS]

Hi Bill, I have listed the recommended firing chart in the blog on my teaching website bit.ly/3aCt6jJ. With ceramics I place texture in the ceramic finishing and mainly add just incisal effects with MiYo. Structure is effective on zirconia to provide a ceramic appearance. I am still learning the structure. There are several Structure technique videos on the MiYO website. All the best.

[@FamilyHolisticDentistry]

This looks great! I'm having an issue with the colors sliding and marbling rather than staying in place. Do you have advice for preventing that?

[@KlimDDS]

Make the glaze thinner on the incisal edge before adding colors. That should do it. If the glaze is too thick, then the colors will creep cervically.

[@thatosekgweng3394]

Good day Doc. How is the stability of Miyo stains?

[@KlimDDS]

Very stable, it is more like a brush on ceramic and it can be covered with structure brush on ceramic that is about 200-300 um thick that internalizes the appearance. Work well on both ceramics and zirconia.

[@JavierSanchez-oc4qs]

Congrats, nice video, Doc. Can Miyo be burn in the speedfire furnace? As a glaze program for the emax cad. Thanks

[@KlimDDS]

Good question, Unfortunately, the Miyo is sensitive to firing conditions. A vacuum is needed which the Speedfire does not have. Programat CS2 by Ivoclar is a good all-around ceramic furnance.

[@eduardweingart7002]

So you can mill emax veneers with Cerec, and then characterised with Miyo, and then fire with Programat CS2?