KNIFE Like a Razor ! Sharpen Your Knife In 1 Minute With This Tool

Hello everyone! You are watching video "KNIFE Like a Razor ! Sharpen Your Knife In 1 Minute With This Tool"
Keeping your knives sharp is essential for efficient and safe cooking. In this video, we'll guide you through the step-by-step process of creating a simple yet effective sharpening tool using common household items. With just a few materials and some basic tools, you can ensure your knives stay razor-sharp. Save money and extend the life of your kitchen essentials with this practical DIY project. Watch now and sharpen like a pro!
I hope you enjoy watching my video!
► Subscribe: bit.ly/Creationholic
On Creation Holic channel, you can learn various inventions, science projects, crafts and DIYs teaching how to reuse or recycle.
© Copyright by Creation Holic ☞ Do not Reup
#diy #tipsandtricks #recyclediy #diyprojects #knifesharpening

[@kennethscholz6027]

Using a guided stone is fine, though not necessary after one puts in sufficient practice. i have one problem with this video and potentially a second: 1. WD-40 is a poor lubricant for sharpening, it will work for a while but soaks into the stones pores and ultimately gums up, clogging the pores - use a proper lubridant. Traditional wet stones can use either water or a non-gumming oil, but once oil is used even once it will remain in the stone's pores where it will repel water from the surface, so once oil is used it should be used subsequently. Water also works well and with 'Japanese water stones' is the only lubricant that should be used. 2. Take care with the direction of strokes. With fine hard stones such as Arkansas or alumina ceramic, etc., one should stroke against the edge, as if the edge were trying to shave the stone - this is to avoid forming a burr. With water stones and leather strops, stroke with the edge to avoid cutting the softer abrasive surface.

[@chuckbolik7060]

By the time you did all that work I could sharpen all your knives and mine.

[@fadedparrot]

thank you! I'm not going to go thru all that to sharpen one knife. You had to fasten that krife down to sharpen it..... so ... to sharpen the other side, you have to loosen the bolts holding it down, flip it, tighten it down, spray it....just too much. If I have trouble working with 1 knife sharpener, I'll get a different kind and try again. I'll be careful, pay attention, or ask for helpp if I need it. But that's just tooooo much to go thru... have a nice day

[@MW-us3sv]

Lol, I got 3 minutes in and opted out.

[@sunriseboy4837]

Gold!

[@creationholic101]

After creating the knife sharpener, the next sharpening takes less than 1 minute to sharpen it

[@sgtzack612]

@@creationholic101 To be fair on both fronts, someone that has practiced can sharpen a knife in about 40 seconds by hand with almost no prep (mounting the blade and getting the right angle on the device) to hair whittling sharp. HOWEVER not everyone has the time to learn such a skill and some others may have tremors in their hands which has a whole range of causes, or other problems that make them incapable of doing such a task by hand, which would make this device extremely useful. Edit: If you want to improve the design I'd like to suggest a way to lower and raise the set angle since this wont work on all blades, as well as investing in a nice diamond stone as you don't need to flatten them and they're much faster to use (I use 325 grit and 1200 grit). Lastly I'd suggest getting a compound to put on the strop to refine your edge (I use 8 micron and 4 micron).

[@manoelpessoa8833]

It's amazing how many people waste time on things that are so simple to do and even more so at risk of an accident when making this movement of their hand against a sharp knife blade.

[@jeffwalker9122]

I've been a butcher for 30 years and have never needed a contraption like this a belt grinder and a high quality steel is all I've ever needed to keep all my blades like razors..

[@hullster9970]

At home i struggle to keep knives sharpe. I have a sharpening steel, but seeing your "high quality" remark, its dawned on me that mine might be passed its best. It looks great quality, proper wooden handle, very heavy, proper steel, but its getting too smooth i guess. I Inherited it with many things. You know, "that looks too good to throw away" etc. How can i tell if the sharpening steel is high quality, taking into account i'm probably ordering online and your cant always trust reviews. Is there a brand to look for? Above all others, its a butcher i will listen to. You also mention belt grinder.

[@_JimmyBeGood]

Where can we see an example of someone sharpening with this method?

[@jeffwalker9122]

@hullster9970 I recommend a steel with diamond coat made by Henkels. I've had mine since 1995. Plus Kasco makes the best cutlery grinder I've ever seen. Just be very gentle with it. Bring your edge back and put a bevel on before building your point.

[@vsheikh]

Its probably for the rest of us who do not have 30 years of experience sharpening knives?

[@rodfair5698]

And when I was at college, I had a butcher. Thanks Andy, from Smith’s Butcher’s in Liverpool, 50 years ago!

[@erroldavis2983]

I love looking at amateurs experimenting with a slight degree of success, save yourself the time and learn to sharpen the knife by hand. So much more rewarding.

[@Turms_Players_Skill-Issue]

Couldn’t agree more!

[@creationholic101]

Thank you for watching

[@roncooke2188]

A visit to Japan would be good for a good sharp knife

[@fritzdrybeam]

Yep.

[@candicechrestman328]

He is sharpening by hand. Notice the hand holding the stone and moving it across the blade. Definition of by hand.

[@emanueletraietta2751]

The time needed for preparing this tool is longer than the time I usually need for stone sharpening my knives and razors

[@creationholic101]

After creating the knife sharpener, the next sharpening takes less than 1 minute to sharpen it

[@buggsy5]

@@creationholic101 Not if it is as dull as the knife you first showed.

[@polygamous1]

If you are able to keep your knife at the right angle while sharpening all well and good but most of us cannot or me this is great anyway you spen time only once doing this device great job mate thanks

[@deadlyicecream1]

​@@creationholic101it takes less than a minute on a stone as well..

[@Herrpiluso.verdadero]

@@creationholic101 THE QUESTION IS: HOW MANY KNIVES DO YOU HAVE?

[@user-gw6ik7mk8p]

Excellent idea. The angle is important.

[@creationholic101]

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

[@herbertvanrensburg6411]

Great idea, Lansky sells a knife sharpener based on exactly those principles. You could always use an old leather belt fastened in a bench vice for the final polish to the blade!

[@creationholic101]

Thank you! Cheers!

[@jeanpanaccio4484]

It's a viSe, not a viCe.

[@herbertvanrensburg6411]

@@jeanpanaccio4484 Why thank you kind Sir for the correction to my error!

[@scrimperuk]

@@jeanpanaccio4484 In the UK the term Vice is used by most makers, suppliers and users. So Herbert was correct.

[@dewfall56]

I have the Lansky kit and it works great. If you can't afford it and have the materials shown here, it is an alternative. "Razor sharp" though, still is only possible with care and craftsmanship.

[@ozcampnhuntdan7858]

Yes sir, that indeed is sharp, well done.

[@MakerBoyOldBoy]

Amazing amount of work to simply avoid common sharpening techniques.

[@creationholic101]

Thank you very much!

[@botchvinik8668]

"common sharpening techniques" ....you mean like maintaining a perfectly consistent angle as you sharpen a blade? Seems to me like that was the entire point of making this simple inexpensive sharpening jig. Try to restrict yourself to only talking about things you know something about....which probably isn't very much.

[@MakerBoyOldBoy]

@@botchvinik8668 Thank you for the comment on my observation. You definitely proved my point. Stick to jigs.

[@p.j.4738]

@@botchvinik8668 more people agree with "@maker" than you! Maybe they see another point of view and you don't?

[@botchvinik8668]

@@p.j.4738 That's because the ratio of stupid assholes to rational people on the internet today is high. I'm used to be in the minority, logical sensible people always have been.

[@joesanchez4895]

This is Brilliant! Thanks for the share. Not everyone can free style sharpen

[@creationholic101]

Glad you liked it!

[@lauraburked3198]

Zwq1

[@DirectCurrent4u]

Sure You can if you try!

[@farisal-salihi3780]

This is both simple and genius. I have seen so many of those type of sharpener but using a full size stone makes life a lot easier. Thank you 😊

[@creationholic101]

Thank you very much!

[@biranit50]

the screws will destroy the holes in the wood plate after few times so i suggest to replace with screws for metal and glue nuts to the bottom

[@creationholic101]

Hello! thanks for your comment. Wish you all the best!

[@douglasgee3427]

Threaded Inserts

[@malcolmlindley4465]

One of my pet hates: countersink screws in non-countersink holes.

[@Trashed20659]

Me too but I do recognize that he is trying to get the smaller washer to self center. Should have used a washer with small hole but large diameter instead of two loose fitting washers, though they are not easy to find at the local HW store.

[@petesmith8886]

Mine too!

[@malcolmlindley4465]

@@Trashed20659he does the same in the fixed bracket. I admit there is an element of self-centring, but positioning of the bracket isn’t that critical, and it looks very amateurish.

[@douglasgee3427]

@@Trashed20659 FENDER WASHERS

[@operatormike3041]

@@Trashed20659 Called 'fender washers' widely available

[@BHRoadStoriesBH]

Bravooooò prijatelju, odavno nisam pogledao nešto ovako, Sretno uvek prijatelju u daljnjem radu

[@Trashed20659]

Straightforward technique that mimics a couple of commercial sharpening systems that work the same way, the one difference here being the absence of a way to shield yourself from coming into contact with the blade accidentally. So watch your grip!

[@wilsjane]

Watching his fingers going to and fro towards the blade made me cringe. A strip of wood, to replace the bracket with a hole, would have allowed him to work far more safely from the other side, along with keeping the stone square to the blade. I also expected the whole lot to go flying off the table. LOL

[@kimz6855]

Yep! nice idea, but the safety is off.....someday you will really fell the result of the sharp blade 😬

[@FlyGuy2000]

Yeah it did look like one of the commercial units available, but this one is super cheap with is an added bonus.

[@creationholic101]

Hello! thanks for your comment. Wish you all the best!

[@beva6162]

Good job! Now that you've made your sharpener, It will be Much faster to sharpen knives in the future!!!

[@creationholic101]

Thank you! Cheers!

[@markfivecortina5730]

That's a really good idea but can I ask when you finished drilling the hole was your drill bit sharper?

[@kychemclass5850]

lol

[@twinwankel]

I like the idea but that is a whetstone not an oil stone. You should spray it down with water not WD40. You will ruin the stone.

[@creationholic101]

Can you talk more about this?

[@krielkip]

Please elaborate on this?

[@delboy1727]

@@krielkip There are different types of stone - an oil stone and a wet stone being two examples. A wet stone should be placed in a bowl of water to completely soak it, usually around 10 to 15 minutes, and can then be used to sharpen a knife, wetting it every so often through the process. Using oil on a wet stone will eventually clog it up, rendering it a lot less effective, if not useless.

[@krielkip]

@@delboy1727 Thanks for the info!

[@metingirgin3582]

👍

[@Finglesham]

Mt grandad used a scythe to cut grass. He carried a stone to sharpen it frequently. He said stroke the blade one direction each side. Never rub a stone up and down a blade. I use his advice as he was a countryman. Born 1967 in fact died 1955. I am 76 only but my mother was 42 when I was born so that is how I came to know him doing jobs.

[@Anna-bv1om]

Born 1967, died 1955??? Creepy

[@creationholic101]

Thank you for sharing your feedback. Have a good day!

[@wonkylommiter6364]

@@Anna-bv1om 😝

[@candicechrestman328]

That is a very good point.

[@JonathanGillies]

So is this correct: 1867 Finglesham's grandfather born 1906 Finglesham's mother born 1948 Finglesham born 1955 Finglesham's grandfather dies

[@raaaabert]

Q. What kind of person would build this? A. Someone with waaaaaaaay too much time on their hands.

[@Alotipsalo]

"Wow, this video is a game-changer! I've always struggled with sharpening my knives, but this tutorial made it seem so easy. The step-by-step instructions were clear, and the tool suggested here is brilliant. Can't wait to try it out myself! The key lesson I took away is that with the right tool and technique, anyone can sharpen their knives effectively at home."

[@creationholic101]

Glad it helped!

[@JasonavHumpreyBoogart]

​@@creationholic101Further more We need much more larger Wood brick...For stability

[@orhanhalc4220]

😂😂😂😂😂

[@ronaldcruickshank3545]

so many other solutions that are easier, safer and quicker

[@tizianoascari8132]

Semplice eppure efficace almassimo.Bravo!

[@creationholic101]

Thank you! Cheers!

[@gabypethe8135]

thank`s from Australia [ housewife]

[@dasmuss6174]

😂👍🇦🇺

[@JonathanGillies]

[not housewife]

[@creationholic101]

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

[@colinquick8078]

Good idea Once made , it will last forever. Also , it a good tool for those that don't have manual skills with angles etc

[@colinquick8078]

Not all people are gifted to work WELL with their hands

[@musicman4635]

@@colinquick8078 THOSE PEOPLE should stay away from sharp objects AND knives!

[@creationholic101]

Thank you! Cheers!

[@erichk5283]

Perfect instruction!😁

[@ancientgamer3645]

Personally, I prefer to strop the blade after every use, so it does not get dull. Sometimes you do need to use the wet stone.

[@AmazingSmart-ngth]

"Wow! This video is a game-changer for anyone struggling to sharpen their knives. The step-by-step demonstration was incredibly clear and easy to follow. Now I can sharpen my knife like a pro in just one minute! Thank you so much for sharing this valuable tip!"

[@SaVaGe-187]

Wow u built and sharpened all that under 1 minute?? Wow your awesome

[@creationholic101]

After creating the knife sharpener, the next sharpening takes less than 1 minute to sharpen it

[@lucianphotography7240]

2 Points for you SaVaGe-187... 1.) It clearly states, sharpen your knife in under a minute. It does not say built this and sharpen your knife in under a minute. Therefore, he shows how to build it and THEN shows you how to sharpen a knife, in under a minute. 2.) So as not to look like a moron when you comment, learn grammar! Especially, when to use the word Your, and You're. Two very different word meanings, and as expected from you, you used the wrong one, pal!

[@guntertorfs6486]

@@lucianphotography7240 Even then , it certainly takes more than 1 minute to sharpen the knife , 'pal '.

[@juliomachin1684]

Genio, terminas en la nasa

[@creationholic101]

Thank you for watching

[@THE-RIVER-RAT]

I applaud your ingenuity However, I think you have just reinvented the wheel.

[@CarlWinter-oy8uf]

NEVER clamp a whetstone in a metal vice ---directly --use cloth or leather padding to protect the stone from cracking !

[@creationholic101]

Hello! thanks for your comment. Wish you all the best!

[@rubennieto-eb1lb]

Carl podría ser más específico en cuanto a la fijación de la piedra, donde iría el cuero?

[@reality9]

Good idea. Best used with anti-cut gloves I think.

[@creationholic101]

Yes, thanks

[@TommyGBassChannel]

Infact..!

[@Alkow403]

GENIUSZ !!! 😂😂😂😂😂😂

[@SaVaGe-187]

Wow u built that and sharpened it all under 1 minutes?? Dang your fast!!

[@lucianphotography7240]

@@SaVaGe-187 You are repeating yourself and showing your ignorance. You already posted this above, again pointing out to us, your poor understanding of basic grammar. You clearly don't know when to use the word Your and You're. Plus, you clearly don't know how to understand what you read. He states, build this, THEN sharpen a knife in under a minute. Everyone else here, understood what was written.

[@CFWaittoleave]

I’m of the opinion this is an impressive set-up. Talk about consistency. So very simple, like all great things…Simplicity.

[@creationholic101]

Thank you! Cheers!

[@buggsy5]

I think Lansky patented that type of sharpening jig over 50 years ago. And Lansky's device is much lighter and far more adjustable.

[@anderswenngren369]

Good device you made! Only thing is that it takes up more space, and I enjoy learning how to sharpen a knife on a whetstone the strict japaneese way personally. You also need a stone to make the whetstone flat every now and then, i dont have that yet tho, but going to buy one and keep sharpening knifes, its kinda fun.

[@creationholic101]

Thank you! Cheers!

[@walgusaastaalustab5525]

why on earth woulod people sharpen the blade wrong way and cut the wrong way :D if u get it sharp and do that, u will injure yourself for sure :(

[@scribblingjoe]

Cool! I can see some improvement by using two bolts and wing nuts in place of the screws so you don’t need to tighten the screws with a screwdriver every time.

[@creationholic101]

Thank you! Cheers!

[@bentgenetics8623]

I'm not building all this just to sharpen a knife.

[@NettoZ900]

By the time he made that third cut on the paper on the beginning of the vid I already have my knife sharpened on a regular sharpener 😂

[@docalexander2853]

First, use a great steel for your knife. Crucible 90 is great.

[@Boatfishingfromthetyneuncut]

What a Muppet using a wetstone with wd40 water repellant lubricant 🤦‍♂️

[@user-it1ow2mh7z]

need to see this

[@UKRAINEMARINES69]

От пяты 😊 к острию

[@leamsiguanzon]

well done, genius!

[@3ck]

Perefektny napad ako udrzat presny uhol pri bruseni,co je velmi dolezite! Vdaka moc za tipa!

[@philanthropist1241]

Tried it, very sharp but WD40 flavoured tomato wasnt so hot 🥵

[@Amael090756]

ohhh tehere sre some possibilities to get rid of thst flavour... its steel and wd 40 doesn't go in

[@russellham2094]

Need to be careful on da barbecue too

[@kennethmcdonald93]

Did you consider washing your knife after you sharpened it ??

[@philanthropist1241]

@@kennethmcdonald93 It was a joke...

[@Machria23]

@@kennethmcdonald93Did you consider using food grade oil for the stone, instead of a toxic chemical? Lol

[@pedroluisdefariasnetofaria2609]

Como vc faz um vídeo de 8:30 minutos para ensinar um coisa que dura 1:00 minutos

[@creationholic101]

After creating the knife sharpener, the next sharpening takes less than 1 minute to sharpen it

[@JanGraben-bc1tv]

Looking from Östervåla Sweden

[@creationholic101]

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

[@samchartrand8226]

Génial. Merci

[@creationholic101]

Glad you like them!

[@rigmormortis164]

Thats my fav flavour...tomatoes with some touch of WD40..

[@creationholic101]

Please clean the knife before use

[@rigmormortis164]

Haha..ok i will😂​@@creationholic101

[@georgmisiak1146]

@@creationholic101 Czym umyjesz potem kamień? Przecież trzeba wypłukać drobinki stali

[@matthewsachaullymce279]

1 minute… yeah!… 💪🏻

[@creationholic101]

After creating the knife sharpener, the next sharpening takes less than 1 minute to sharpen it

[@southpark4151]

Those pivoting handle sharpeners are good. But if you just need to cut tomatoes for regular home cooking or anything, then those 'accusharp' (or clone, equivalent) portable sharpeners are amazing. 30 seconds or so, and you're done.

[@Jobagentur]

Als Werkzeugmacher sage ich: Grundsätzlich gute Idee, aber: Den Stein NIEMALS vor und zurück bewegen (dabei entsteht ein kleiner Grat ohne Standfestigkeit), sondern IMMER nur gegen die Schneide, genau wie eine Feile (deswegen nennen wir den in diesem Falle improvisierten Ölstein auch Schleif-Feile). Dann hat man eine saubere, standfeste Fase und spart sich die weiteren Arbeitsgänge.

[@creationholic101]

Hello! thanks for your comment. Wish you all the best!

[@GhostKon]

that one mimute feels like eternity

[@keithyoung7]

Nice idea with simple tools.

[@anujafernando8438]

Great job mate! Keep up with your tech tips! Thank you for the cool video!

[@creationholic101]

Thanks for watching!

[@jacquesvonck5935]

Super intéressant pour moi qui aimes la cuisine SURTOUT avec de bons outils, et les Couteaux font partie des plus importants. UN TRÈS GRAND MERCI POUR VOTRE INFORMATION.

[@creationholic101]

Glad you like them!

[@biscuitkitchentreviews]

He could have learned free hand sharpening in the same amount of time given he already has the stone.

[@creationholic101]

My technique wasn't good, so I created it

[@lucianphotography7240]

@BiscuitK... Not really, most people would never learn that quickly and most people would NEVER be as consistent with their angle on the knife blade, doing the sharpening free hand, as they would be, using this device.

[@d412a]

How many anonymous scientists exist to make life easier for humanity. Thank you!

[@musicman4635]

They are called CHEFS with KNIVES. Knife sharpening is not a 'new' science dude!

[@fritzdrybeam]

He's showing you how to wear out a knife.

[@fritzdrybeam]

@@musicman4635 These people crack me up, I bet they all love Enron Musk.

[@user-ei6np8yj1i]

แบ่งปันเลิฟ🥰

[@creationholic101]

❤️❤️❤️🍀🍀🍀😍😍😍

[@pablogarcia5542]

Con tantos especialistas en cuchillos y afilados disculpen mi ignorancia y saquenme de una duda El tomate debe cortarse con cuchillo de sierra porque ciega el filo normal o simplemente es un bulo? Por favor Iluminenme. Gracias

[@dirkruschenpohler1004]

Germany, well done

[@creationholic101]

Welcome to Creation Holic channel! Hope you have a good time while watching the video

[@frankwilliams22]

For what he spent on all of the individual components combined he could have just bought a knife sharpening kit that functions essentially the same way, but is much safer to use.

[@creationholic101]

I take advantage of what is available around me

[@heretoserve5023]

Thank you!

[@creationholic101]

Thank you 🤗

[@SongSeeker7]

I used that to sharpen my lawnmower blade. 👍

[@creationholic101]

Glad it helped!

[@aidangonnelly]

can't see why you just don't do it by hand? like thats the ways it been done for 1000's of years without issue? honestly your struggling with the screwdriver and considering the fact you could do serious damage with your method and direction of sanding id invest in Kevlar gloves if i was you!

[@DZNTZ]

First of all, he IS doing it by hand - he’s simply fixing the angle to make it more repeatable and efficient. Second - the crank powered grindstone has been in use since the 14th century… Fixed angle jigs of all kinds have been used for centuries to get consistent edges on everything from swords to scissors. Japanese style sharpening is not the only method that’s been around forever - humans have been like applying mechanics to grinding/sharpening since the Middle Ages.

[@garyfeltman4482]

If you want a straight true edge, this is how it is done!

[@creationholic101]

My technique wasn't great, so I created it

[@tigretigre2878]

Es mucho gasto en armar eso y perdida de tiempo para afilar un simple cuchillo,,no se nesecita más que paciencia y práctica para afilar un cuchillo, "la práctica hace al maestro"

[@creationholic101]

Thank you! Cheers!

[@franciscojaviertrianagarci2899]

Saludos amigo excelente idea . Podrás comprar el link de la app para los grados

[@creationholic101]

Thank you! Cheers!

[@adilsonmarson3646]

Que mão de obra para afiar uma faca , gim de carreira.

[@chetg2924]

too much work

[@creationholic101]

After creating the knife sharpener, the next sharpening takes less than 1 minute to sharpen it

[@aguswahyukurniawan4820]

great, now my food tasted better with WD40.

[@nickeypetersen5622]

This answer sounds very ironic. Hahaha. But a good comment😊 anyway I guess you are welcome to wash the knife after sharpen it with this stupid idea. It could be solved simple instead of all this arrangement for the correct angle.

[@henriquevandeursen1506]

Do you know soap and water???

[@nickeypetersen5622]

@@henriquevandeursen1506 yes ofcourse😊

[@bruceblackstock6299]

Fish oil attracts me too!

[@creationholic101]

Thank you for watching

[@ShamnaNizar-bd1hd]

This is good knowledge

[@richg3411]

So, a sharpened knife cuts better. Good job!

[@robertooliveira990]

You made in 10 minutes videos, but it could last 30 seconds.

[@user-qj7tf8cx4u]

😂, or take a electric grinder no?

[@censilvano7333]

Hu

[@TheMisterEAK]

Agree!

[@creationholic101]

After creating the knife sharpener, the next sharpening takes less than 1 minute to sharpen it

[@JorgePerez-dy2jg]

El soporte del cuchillo también puede ser con imanes de neodimio da muy buen resultado.

[@gchomuk]

WD 40 is not a lubricant. It's for Water Displacement. What a ridiculous idea.

[@nyosionus]

WD 40 its lubricant and works very well

[@Repo8971]

Water displacement and it took 40 tries to create. Look it up.

[@gchomuk]

@Repo8971 I did. Years ago. It destroys actual lubricants. It took 40 tries to eliminate moisture on things like carburetors. It would serve you well to know WF you're talking about before you spew crap.,

[@Repo8971]

@@gchomuk wtf are you talking about? I agreed with you. I was responding to the second reply.

[@Repo8971]

Maybe you should reread my reply before you go talking shit.

[@lrue]

Great tool! I’m from Belgium 👌

[@creationholic101]

Glad you like them!

[@slivkaladislav1025]

Něž toto všechno vyrobím a připravím,, raději ten nůž vyhodím ,,!😂😂

[@creationholic101]

You'll be happier if you fix it yourself

[@TIFFandDRETV]

Buy a new knife.😂

[@creationholic101]

Thank you for watching

[@marcospaulomaciente3574]

Hello, congratulations on the excellent video, very educational! Would you like to know what is the best or ideal angle for sharpening knives? BR

[@creationholic101]

15-22 degrees

[@congamike1]

Thats a better tool that the expensive ones that can be bought online!

[@508outdoorcooking]

Ya that’s cool but you can do the same thing with a cheap knife sharpener from Walmart bro

[@creationholic101]

Thanks for your feedback. Wish you all the best

[@508outdoorcooking]

@@creationholic101 I really do love your channel though I watch it all the time. I love a lot of the ideas you have.

[@giorgioditizio6293]

Non vale la pena di fare tutto quel lavoro. Un affilacoltelli da pochi euro funziona meglio e non richiede tutto quel tempo.

[@rolandgustafsson5655]

Amazing amount of unnecessary work just for sharpen a knife-edge 😴

[@creationholic101]

After creating the knife sharpener, the next sharpening takes less than 1 minute to sharpen it

[@kenmoon2331]

I spent £5 on a Kitchen Devil ceramic knife sharpener. It's a lot easier, more hygienic and safer to use with the added bonus that it takes a lot less work to sharpen my knives. Oh yes... I purchased it over thirty years age and it still works. If that's not value for money then I don't know what is!😊

[@creationholic101]

Thank you! Cheers!

[@fluxelectron508]

Vidéo ludique très soignée. VERY NICE 💜👍

[@creationholic101]

Thank you! Cheers!

[@Aubreykrendale]

joe biden approved.

[@1BobsYourUncle]

Joes not allowed to hold a knife much less sharpen one.

[@royleon3525]

The patience of a saint is required to watch this endless video. Sleepy Joe would have fallen asleep in the first 3 minutes.

[@userI3I2]

Weird obsession.

[@creationholic101]

Thank you for watching

[@bcchiarmsudarjtbc]

I see that this channel mainly re-shares ideas from other channels. Content creation is rare

[@user-ze4bo5cs2y]

Frecție la picior de lemn. Decât să mă chinui atâta amar de timp pentru o improvizație că această, mai repede ascut cuțitul pe prispa de la mamaie, sau pe orice perete abraziv.

[@luigistudioso2368]

Eccellente idea nel fai da te. Della serie....come ingegnarsi per mettere a frutto risoluzioni. Complimenti all'autore

[@creationholic101]

Thank you! Cheers!

[@thangnguyen-zq6iu]

Rất tuyệt vời ❤

[@creationholic101]

Thank you 🤗

[@Clothahump1]

Well, that was 9 minutes of my life I'll never get back.

[@robtok1968]

Going to warp the knife eventually 😊

[@creationholic101]

I did and it was very good

[@RedRad1990]

The cashier was more helpful than the manager 😂 Also, that's John Higgins from SNL's Please Don't Destroy

[@creationholic101]

Thank you for watching

[@HskslsYtqqkk-lj3xh]

Hej jag kommer från sweden jag vore tacksam om du kunde skriva vad jag skall ha för grader på lutnigen tacksam föret svar mycket bra video 😊😊😊😊

[@creationholic101]

15-22 degrees

[@Albert6636]

genial !!!

[@wagnerazevedosilva5830]

Amazing... muito bom! gostei demais!

[@creationholic101]

Thank you! Cheers!

[@Tsamokie]

Ham 'n' egger. I got a store bought sharpener of the same design. It's a Lansky and it has a much better range of grits.

[@tonybloomfield5635]

Buy the man a battery drill/driver!

[@bricecoustillas2176]

Congratulations: that is really good job and good trick to do the job!

[@creationholic101]

Thank you! Cheers!

[@hakhar61]

Thank you it’s easy and simple way to sharpen knives

[@creationholic101]

You are welcome!

[@rooneyboss]

È ottimo anche per affettarsi le dita 👍🏻

[@clairen821]

This video is a windup definitely 😂 what the hell! All this work to sharpen my knife! I will go and buy new one easier 😂

[@viniciorojasfernandez648]

Gracias por su ayuda

[@stevebrewer342]

A device like this has been on the market for years

[@BenitoSanchoco]

Ingenioso!!!

[@stradivarius1961]

questo lavoro è stato fatto sicuramente da un professionista.

[@Suavache]

Great technique for sharpening knives. Give me a clap. Thank you

[@creationholic101]

Thank you for watching