Most Effective And Robust Adhesive With Baking Soda And Super Glue

[@RobertHollander]

Excellent ideas. One word of caution. I learned this the hard way a few weeks ago. I accidentally knocked my Les Paul guitar off its stand and seriously cracked the neck. Because I needed the adhesive to flow all the way into the cracks, I decided to use super glue because of its water-link consistency. I used a 3ml hypodermic syringe with 18 gauge needle which I filled with the super glue so that I could inject the glue deeply into the crack. I intentionally used a lot of glue hoping it would ooze out. I immediately attached the clamps to hold the neck back together tightly with the intention of wiping off the excess glue. At that very moment, I discovered how noxious the fumes are when using that much superglue. I couldn't breathe around it and it immediately left my eyes burning severely. Consequently, I wasn't able to rub off the excess glue which meant I had a lot of unnecessary sanding to do once everything set up. The next time I work with that much super glue, I'll wear a respirator and eye protection.

[@dimik3855]

A little fan beside your work area blows the fumes away nicely.

[@sureshfrancis9202]

Use glasses when handling glue . Don't inhale .

[@lilycarolyn4Christ]

Fan blows the soda n graphite😊

[@RobertHollander]

@@dimik3855 Great idea. Thanks.

[@creationholic101]

Hello! thanks for your comment. Wish you all the best!

[@lambertoborghi6002]

I did know about baking soda but nothing about graphite! Many thanks from Rome Italy!

[@creationholic101]

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

[@TheAlbator1966]

Eric de France. Super je découvre, moi qui fait beaucoup de modélisme ça va bien me servir surtout que ce sont des ingrédients facile à se procurer. Un grand Merci. 👍👍👍

[@coyote1311]

Je fait partie du même monde que toi, si les astuces fonctionne vraiment je vais faire de sacré économies 😅

[@creationholic101]

Glad you like them!

[@igordugonjic]

That fixing of the gear is brilliant ,thank you!

[@creationholic101]

Glad to help

[@SS-pi2yi]

@@creationholic101 1) Can u please confirm the ratio of how much graphite powder & baking soda you used in your video? Is it same amount for each (1 to 1 ratio)? Or more of one than the other? 2) what was that u used to apply the glue into the gear teeth filler space? Is that a special syringe/ applicator tip..where to get? 3) what is the purpose to drill the holes through the gear? (Wondering what is the objective for doing that..if needed or can skip this step etc). Thank you for a really amazing video !!!

[@franciscogarciamorales2062]

Se ve interesante tu idea trataré de ponerla en práctica y después daré mi opinión, gracias.

[@soportecovein221]

yo he probado el bicarbonato y funciona. el que no he probado es con el lápiz pero lo haré.

[@creationholic101]

I'd love to hear if you've tried this idea yourself or if you have any other creative suggestions to share

[@dmoreno1977]

Saludos desde España. Alucinante tus reparaciones e ideas.

[@creationholic101]

Thank you! Cheers!

[@BruceZerr]

I'm Bruce from Church Creek, Maryland, USA 'This' - was marvelous to watch. Super-thanks.

[@محمدعلي-ح9ز8ع]

ممتاز انا اتعلم منك بعض الاشياء الهامه شكرن على مجهودك الرائع

[@creationholic101]

Glad you like them!

[@jaimerivera7175]

Thank you for giving these new tips.

[@creationholic101]

You’re welcome! I’m glad you found the tips helpful. 😊

[@dimik3855]

Man, as a longtime superglue/cyanoacrylate enthusiast I have to say these clever ways of making repairs rock! A refreshing change from all the clickbait and useless crap on YT.

[@creationholic101]

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

[@antonios4926]

That is brilliant. Will try it on a dough mixer. From Cyprus

[@creationholic101]

Glad you like them!

[@natazer]

This kinda inspired me to reinforce some plastic things i have to prevent breaking.

[@kaleungchan4989]

111111¹

[@olivierpector5046]

Excellent video, Very interesting, Interesting too the warnigs of the dangers to inhale the superglue vapors.

[@creationholic101]

Thank you for noticing! Safety is always our priority when sharing these ideas. Glad you found the video useful!

[@DIYTechTrends]

Great job ❤

[@creationholic101]

Welcome to Creation Holic channel! Hope you have a good time while watching the video

[@ay9460]

Senin gibi yaratıcı insanları severim.harikasın Türkiye den

[@creationholic101]

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

[@rodneybettimontenegro2262]

thank you for your videos, love them. The technique used for the gear was genius & Clever (Brasil)

[@creationholic101]

Hello! Welcome to Creation Holic channel. I am very happy to read your comment. Have a good day!

[@jesusvelascohernandez717]

Veo tu vídeo desde España, probaré tu idea. Gracias. Me suscribo.

[@creationholic101]

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

[@NasaInventions20]

I really like your project! Congratulations

[@creationholic101]

Thank you so much! I'm thrilled you liked the project.

[@barnabyvonrudal1]

Amazing. Cool to get the graphite/graphene from the pencil

[@creationholic101]

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

[@garrymcgaw4745]

Nice one, that super glue is great once you add those ingredients to it. Thank you for those tips.

[@creationholic101]

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

[@ejeckamdaniel1562]

Thank you for your exposition. Very creative. Keep it up.

[@creationholic101]

"Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things! "

[@francis221792]

Perfeito, já conhecia a cola de plástico com acetona mas a grafite com supercola e bicarbonato foi novidade, a reconstrução da engrenagem foi incrivel.

[@creationholic101]

Thank you for your comment. Wish you have a nice day!

[@juangerardohernandezbrenes2556]

Cómo ago para rellenar cuando los dientes estén desgastados gracias

[@creationholic101]

I will research and send it to you when there is a good solution

[@wildgorillaman6340]

貴方は天才です😊 このギヤの型取り方法は、とても参考になりました❤

[@creationholic101]

I'm glad you enjoyed this project! Feel free to connect with other viewers in the comments section and share your results. It's always inspiring to see what everyone creates

[@bennyb8005]

Good ideas.Thank you

[@creationholic101]

So nice of you

[@joseubeda1881]

Desde León España , lo había probado con cianocrilato y bicarbonato

[@hamidrezamirmoazi6129]

Thanks alot. beacuse teach me about this important team.

[@creationholic101]

Welcome to Creation Holic channel! Thank you so much for your support

[@jesusmariaagudelocastillo6472]

Hola amigo de cartagena colombia gracias por esa brillante idea hermano

[@creationholic101]

¡Gracias a ti por ver! Me alegra que te haya servido! 🤝

[@stewartbruce8902]

A superb demonstration from you. What is the difference from using baking soda, verses baking soda with the graphite power and super glue? Thank you.

[@creationholic101]

it's sturdier

[@stewartbruce8902]

Thanks for your answer.@@creationholic101

[@robertpilon7692]

Une excellente idée de bricolage. Merci de l'avoir partagé.

[@creationholic101]

Hello! I am very happy to read your comment. Have a good day!

[@juanpabloserranoquispe48]

Excelente q nuem trabajo con el carbon de la pila ,gracias desde lima peru

[@juangerardohernandezbrenes2556]

Desde costa rica

[@creationholic101]

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

[@williamjosevillalba]

Felicitaciones desde Colombia

[@creationholic101]

¡Muchas gracias! Saludos desde aquí también!

[@ASAUSA-le9gs]

A new subscriber, I am from Iraq, Baghdad

[@creationholic101]

Welcome to Creation Holic channel! have a nice day!

[@servetaydn5151]

very beautiful wonderful impressive

[@creationholic101]

Thank you so much! I’m glad you found the video impressive. 😊

[@georgpriewasser7042]

danke für die guten ideen aus Rumänien

[@michaelellis3091]

Not surprised, thanks for the heads up!

[@creationholic101]

Thanks so much for watching our video. Wish you all the best

[@markcharlan]

Excellent ideas and well presented. Thanks from Miami, Florida.

[@creationholic101]

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

[@romanburliga9593]

Thank you from Poland

[@犬塚友也]

玄関のサッシが外れたので、この動画を見て修復できました。この考え方は凄い。

[@creationholic101]

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

[@wokubiranume383]

Been looking for this account...appreciated thanks

[@creationholic101]

Glad I could help

[@TersiteTM-TersiteTM]

Ottime idee... Leon vedo l'ora che di rompa qualcosa per aggiustarla... 😎.. Ciao 🖐️

[@creationholic101]

I'm glad you enjoyed this project! Feel free to connect with other viewers in the comments section and share your results. It's always inspiring to see what everyone creates

[@Sitemetespierdes]

Exelente! saludos de argentina

[@creationholic101]

¡Gracias! Saludos a Argentina!

[@patrickdauphin4855]

felicitation de France

[@vuthanh6970]

Thank you

[@creationholic101]

😍😍😍😘😘😘💕💕💕

[@EmilyDIY-xb3lz]

Awesome. I learned tips from your sharing.❤❤

[@creationholic101]

Awesome! Thank you!

[@koki-ep4jz]

marvelous🎉

[@creationholic101]

Thank you! I’m happy you enjoyed it!

[@ΓεώργιοςΓιαλαμάς]

Ωραίες ιδέες για επισκευες

[@payorabuo9534]

Increíble. Tomo nota. Soy de Granada, España

[@creationholic101]

Welcome to Creation Holic channel! Thank you so much for your comment! have a nice day!

[@Cyanowater]

Muy clarito , desde España un abrazo

[@creationholic101]

¡Muchas gracias! Me alegra que te haya quedado claro. ¡Un abrazo desde aquí también!

[@arifsiddiqui6578]

wonderful ideas , however what is cyanoacrylate please explain its composition and strength , thanks and God Bless you for Shearing your wisdom and knowledge .

[@mymai5859]

Super glue

[@josebasiliorodriguez5410]

Estoy iendo el vídeo por segunda vez, son muy buenos se aprende mucho de ellos desde Margarita Venezuela

[@creationholic101]

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

[@taversumit]

Amazing technique, Very nice thanks for this great idea

[@creationholic101]

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

[@eugenpeptanaru4877]

Romaní su talento si inteligenti

[@anagabas8368]

Que imaginación!!! Soy de Zaragoza, España

[@creationholic101]

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

[@حياتكمعصالحتكالقحطاني]

I am from Saudi Arabia and I am honored to follow you because your videos are very, very useful

[@alialavi3361]

سلام برادرم . من از ایران هستم . چرا به فکر مردم مظلوم غزه نیستید ؟ چرا اجازه می‌دهید رژیم قاصب صهیونیستی زن و بچه های بی گناه مسلمان را میکشد؟

[@cesarantoniomorenosanchez3533]

Saludos desde el sur de Colombia

[@creationholic101]

¡Saludos desde aquí! Gracias por ver el video y compartir tus saludos.

[@sannekemartha7737]

Kind regards from The Netherlands, Europe !

[@creationholic101]

Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!

[@yolarehere]

On the last part, how can the mold and the fix mixture not glued? Do you put something on the mold? So you can separate it easily?

[@creationholic101]

I usually apply a layer of oil

[@danteprasath8714]

Excellent Bravo 👍👏.

[@creationholic101]

Welcome to Creation Holic channel! Thank you so much for your support

[@saradarioify]

Fantastici. Grazie

[@creationholic101]

Grazie mille! Sono felice che il video ti sia piaciuto. 😊

[@TheManifattura]

Excellent work and would have saved me a lot of trouble if I had known

[@creationholic101]

Hello! Welcome to Creation Holic channel. I am very happy to read your comment. Have a good day!

[@gbkworf]

I use baking soda and graphite powder, generally depending on the color I need. Never have used them together. What does mixing the 2 together do for the finished product?

[@creationholic101]

Mixing baking soda and graphite powder can enhance the texture and color of the adhesive. It can also improve adhesion in some applications!

[@lolajoatodos7110]

De Argentina, voy a probarlo

[@حسینصادقي-ك4ص]

تشکر از زحمات شما از ایران هستم

[@creationholic101]

سپاس از پیام محبت‌آمیز شما! خوشحالم که از ایران بیننده داریم. 😊

[@laurencelolotte2913]

👍 super idée, bonjour de FRANCE 👋

[@rua3787]

Perfect, hello from Türkiye

[@creationholic101]

Welcome to Creation Holic channel! Hope you have a good time while watching the video

[@eyupgunes-ol5gr]

Ben Türkiye'den yazıyorum. Gerçekten süpersin. Seni tebrik ederim. Çalışmalarında başarılar dilerim. E.GUNES

[@creationholic101]

Hello, you are so kind to leave me a comment! If you have any other better ideas, please share them with me! Wishing you health and happiness always!

[@sakkmatt]

Than you from Hungary

[@creationholic101]

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

[@oranbilsen7035]

Creative and precise. A pleasure to watch. Thanks

[@creationholic101]

I'm glad you enjoyed this project! Feel free to connect with other viewers in the comments section and share your results. It's always inspiring to see what everyone creates

[@pachecowalter3949]

Walter - Florianopolis - Santa Catarina. Muito bom esses experimentos.

[@creationholic101]

Hello! I am very happy to read your comment. Have a good day!

[@kimcs981]

대단한.수리기술.👍🎉

[@sr-oc6lo]

Is that lead mix with baking sir pls advise

[@creationholic101]

Mix pencil powder and backing soda

[@LEOMARDOCORPUZ]

Amazing idea, I deed not see that coming.

[@anonymously241]

Good boi 👍💯🙌

[@creationholic101]

Hello. Thanks for your positive feedback. Wish you all the best

[@marthaescobar7681]

Me parece increíble. Lo voy a probar y luego les comento

[@creationholic101]

I'd love to hear if you've tried this idea yourself or if you have any other creative suggestions to share

[@hoamgminhnguyen5950]

Kỹ thuật hay và hữu ích. Thanks

[@creationholic101]

Welcome to Creation Holic channel! Thank you so much for your support

[@浩徳佐藤]

素晴らしい知恵です😮

[@alijouni1472]

Hi👋 Good idea 💡 I'm Ali from Lebanon

[@creationholic101]

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

[@SuperFredAZ]

Very clever!

[@creationholic101]

Thank you! Cheers!

[@Alcuadrado807]

👌👏👏👏👏👏 Realmente útil e inteligente GRACIAS Desde España

[@อิสรียาพรจันทะแพน]

I from Thailand....i use silicon sand

[@nabilzaky4186]

Exllent ideas

[@creationholic101]

Thank you! Cheers!

[@abod2702]

High professionalism at work. And a very cool idea😊

[@creationholic101]

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

[@DogDog173]

from Turkey. and cool video!

[@creationholic101]

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

[@radoslavstoyanov5647]

От България гледам...😊♥️

[@Kahkeshan.]

تعمیر چرخ دنده خوب بود 👏👏👍👍

[@namnew-x6j]

請問小蘇打+502胶水，能承受高温嗎？

[@creationholic101]

If used at high temperatures, you should use specialized equipment

[@Dingdandong]

احترامي و تحياتي من المغرب 🇲🇦❤

Nice video!!!. Greetings from Spain

[@creationholic101]

Hello! thanks for your comment. Wish you all the best!

[@WorthlessNickores]

Graphite, thanks!

[@creationholic101]

Have a good day!

[@HbtFilms_arte-audiovisual]

muy bien gracias! pude arreglar los lentes de mi madre. Saludos desde Quito - Ecuador!

[@creationholic101]

Glad it helped!

[@abdallaabdalla994]

انت رائع،،، انا من العراق

[@creationholic101]

Welcome to Creation Holic channel! Hope you have a good time while watching the video

[@Edivaldo587129]

Essa ideia da engrenagem foi demais!... Obrigado!

[@creationholic101]

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

[@Cibo-1]

How you do "clone" a entre little gear Whit this mix?

[@creationholic101]

You can make a mold using the mix and replicate the gear. Careful shaping is key!

[@allyoucando8486]

This idea to use graphite with baking soda will be great. I'm in drag racing rc, and you need to stiff the arm to make less flexible. This idea will help a lot and don't need to spend to much metal with I can make the arm more durable and stronger for fraction of the cost

[@creationholic101]

Glad you like them!

[@marcb8874]

SUPER , MERCI

[@creationholic101]

Welcome to Creation Holic channel! Thank you so much for your support

[@RRED2]

Absolutely amazing thank You 😅😅😅😅😅

[@creationholic101]

Thank you too!

[@en2oh]

You saved the best for the last! Your improvised gear repair is brilliant! If you really want superior strength, use graphene powder. As others have mentioned, cyanoacrylate fumes can be noxious (the first time) but actually deadly on repeat exposure due to sensitization.

[@creationholic101]

Hello! thanks for your comment. Wish you all the best!

[@Hasan_Erturk07]

Kanka bu alet çantası düzenleme ile ilgili bir video gelir mi?

[@creationholic101]

Sorry, I didn’t quite catch that. Can you repeat the question for me please?

[@Hasan_Erturk07]

​@@creationholic101A video on Bro toolbox organizing ideas.

[@MarceloBatistaHarmonica]

From _Belo Horizonte/BraSil_ Very good ideas!!! Congrarulations!!!

[@creationholic101]

"Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things! "