CReeves Makes The DIY Pallet Wood Wall ep007

[@raduszilagyi6055]

I love it. I always dreamed of having this in my house. First I need to have my own house, then I will make it 😁

[@J.D.Supreme]

Great creative work! I've been a carpenter for 30 yrs now and I've learned if I keep my eyes and ears open there is always something new to learn. Great people doing artistic, imaginative work! what's not to love about that? What I saw here was inspiring!!!

[@CReevesMakes]

Thank you very much J D! We love to share and learn as we progress in our projects!

[@cocomuncha7667]

That looks amazing.

[@jemivr_4650]

Wow beautiful, i like you creativity

[@CReevesMakes]

Thanks! We love our wall!

[@Taylormj83]

Great video. I’m currently doing the same on my breakfast bar wall in my kitchen. A lot easier with all your tools but I’m getting there. I’m up to the sanding down and wondering what u used to paint or seal the wood. I’m looking for something that will soak in seal,protect and also bring out the natural grain on the wood.

[@CReevesMakes]

Hey there! Awesome to hear about your project! Ours is still as vibrant and fresh as it was when we did it. We used several coats of Minwax Polycrylic Satin for the finish. Thanks!

[@thomasfoster5200]

I was going to use tongue and groove until I seen this beautiful wall. WOW!!! Thank you guys

[@CReevesMakes]

Glad you like it! The pads havent distorted yet and its been almost a year. Something that I will keep an eye on.

[@eric40139]

bravo super travail ; et sa rend super bien

[@JaxJazer]

it looks beautiful

[@CReevesMakes]

Thanks 🙏🏻! It still does! It’s our favorite spot in the whole house!

[@williamsteary6434]

Well done guys! That looks so awesome! It's nice to see that even though something takes a little thought planning and some elbow grease, it's still worth the effort to see something that looks so nice!

[@CReevesMakes]

Exactly! Thank you very much! We still love it and it is a popular favorite for friends and family that visit.

[@ADadAndHisKids]

That there looks like a lot of work, good job. Fancy looking.

[@CReevesMakes]

Thank you! It was a lot of work, but we knew what we wanted and that we could get it done with some work and determination. It turned out better than we expected and we love it. Thanks for the support!

[@chriscarskaddan3297]

How can 6 people not like this! The video and project are terrific. Great job!

[@CReevesMakes]

Thank you Chris! I appreciate it. All that matters is that we LOVE it and we had a blast doing it. Thanks for the support! Keep watching!

[@DenAndMug]

This looks fantastic! We sure wish we had a plainer for the 180 boards we used on our pallet wall haha!

[@CReevesMakes]

Oh boy! Yeah I bet that was a long process! Did it turn out the way you wanted?

[@DenAndMug]

CReeves Makes We ended up just keeping our boards rough but we love the look. It turned out even better then we expected especially because we had no idea what we were doing haha! We have a video on our channel of the process if you want to check it out! But yeah we are super happy with how it turned out 😀

[@abigailinzunzabecerra8447]

Que bello !!!! Y punto !!!! 👍👍👍🥰🤗

[@zedhaead]

Nice video. Well done job. Great team work Greetings from israel

[@CReevesMakes]

Hello in Israel! Thank you very much! We love the wall and its still as beautiful as the day we put it up!

[@blakenorthrup]

BOSS! Looks great!

[@CReevesMakes]

Thanks! We love it!

[@docteurpeinture]

really good work, beautiful final, "clap clap clap "

[@timk2853]

Really nice! Enjoyed the workmanship!

[@Hambone8771]

Love it!

[@sneakersonfeet9045]

Amazing work!

[@CReevesMakes]

Thanks for watching!

[@MarkMiller-zm2th]

I love that, makes your bedroom look really warm.

[@CReevesMakes]

Thanks Mark! We love it and the colors of the decor really work well with the wood tones.

[@kellystaten4226]

Great Job!

[@CReevesMakes]

Thanks Kelly! 👍🏻👍🏻

[@ArM4ND01]

Fantastic job guys! It's beautiful

[@papapio13]

Wanderful. I don't understand how you fix on the wall? Only nails?

[@CReevesMakes]

Long nails and some glue.

[@michaelsmith296]

great job ! Your helper is awesome too !

[@CReevesMakes]

Thanks! Teamwork!

[@akshaym1272]

Wow... brilliant..changed the complete look of the wall...💛

[@CReevesMakes]

Thanks! We agree! We love it every day!

[@rzgarmohamad3336]

thank you very much .. i like that is style wall

[@CReevesMakes]

Thanks for watching!

[@robertpiatt7264]

great job, turned out beautiful. you 2 killed it. ive been dismantling pallets for about 2 months now periodicaly and the plan is to do the same thing in my house too. I got some helpful tips from watching your vid. ty for sharing

[@CReevesMakes]

Thank you Robert! WE had a lot of fun doing it and watching it unfold. The beauty is, that you can make it however you want. We chose to plane the wood to clean it up and show the grain. I hope yours turns out awesome as well! Thanks for watching.

[@heckiepeckie321]

Robert Piatt rffffffffffffd

[@heckiepeckie321]

Robert Piatt dddddddd

[@s.fyfe-joinery5540]

Nice, very inspirational.

[@CReevesMakes]

Thank you!

[@covertops.]

Beautiful, interesting and informative. Thank you!

[@CReevesMakes]

Thanks for watching! Glad you enjoyed it!

[@CReevesMakes]

Thanks for watching! Glad you enjoyed it!

[@brucewalters8974]

That actually looks really nice. Looked like a lot of work, but definitely worth it in the end.... Nice Job !!

[@CReevesMakes]

Thank you very much Bruce! It was a lot of work but we had a lot of fun and we love the room so much! Feels like a cabin retreat!

[@barryroberts6470]

Brilliant work on wall and looks great too! Barry (ENG)

[@CReevesMakes]

Thank you very much! We love it too. Made it through the winter and had zero issues!

[@tanojake8199]

Beautiful hands down. Perfect

[@CReevesMakes]

Thank you very much! 👍🏻👍🏻

[@javi-chu]

Great job! Congrats!

[@CReevesMakes]

Thank you!

[@dhansen57]

Nice job Casey! Doing 1 living room wall that way. Thanks

[@CReevesMakes]

Awesome! After two years it is still as nice as the day we finished it. No issues with wood movement or anything! Good luck!

[@vidasimples7046]

kzbin.info/www/bejne/eInZk6pmfaunmtU

[@ahmedalsalmany6294]

Great work 👍

[@hobbistadineanderthal7697]

Hello... Good... could I know the type of paints used and the final one?

[@CReevesMakes]

Just water based Polycrylic from Minwax

[@ivormiller8425]

Looks amazing did you glue them on

[@CReevesMakes]

Thanks! Yes in spots on a couple ot them but no on the longer ones that hit several studs. Still looks amazing after all of these years!

[@startraxkj]

Do you ever fill the nail holes? Probably more rustic left natural

[@CReevesMakes]

Nope, just left them for that rustic appeal. Thanks!

[@МаратМустафаев-к3м]

Молодцы красиво супер

[@leonjeromeecho3391]

what if I don't have brad nailers..?? is no nail glue is enough to attach those planks of pallets?

[@CReevesMakes]

You could use glue but maybe get some small trim nails and a hammer and throw a nail in each end of the long ones. Just to hold them in place so you can keep moving.

[@agnesp.660]

In Ibiza rooms are usually dump. Does wood walls improve the inside climat sensation? Thank you so much for your answer.

[@josemariasanchez9977]

Muy buen trabajo, 👍👍

[@CReevesMakes]

muchas gracias!

[@luicarce]

Eccezionale! Splendido!

[@liwaichwar3446]

I enjoyed watching it many thanks From Kurdistan

[@CReevesMakes]

Thank you very very much for watching! I appreciate it!

[@vidasimples7046]

kzbin.info/www/bejne/eInZk6pmfaunmtU

[@bionicnichola9251]

Looking at doing this at home. Good job 👍 thanks for sharing !

[@CReevesMakes]

You’re welcome! Thanks and good luck! 👍🏻👍🏻

[@tysont9872]

Great Job

[@CReevesMakes]

Thank you very much Ray!

[@1533ramsay]

I like the wood to be natural looking. Nails and all... That's my style....

[@CReevesMakes]

Hey nothing wrong with that! That was our original plan but then I planed one board and that was all she wrote! 😆

[@RSLWoodworking]

Great job. Thx for sharing

[@CReevesMakes]

Thank you Rob! Thanks for watching and supporting the channel!

[@sparkiekosten5902]

I like that!

[@CReevesMakes]

Thanks!👍🏻

[@CReevesMakes]

Thanks!👍🏻

[@lb2784]

Which is the link to that tool what smooth out the wooden pieces ?

[@CReevesMakes]

That is just a basic Ridgid 13” planer. There are a lot of great options out there to buy.

[@Dreamster399]

Well done!

[@ffemtp830]

Did you space the boards at all? Was it 1/2 in drywall back?

[@CReevesMakes]

No spacing. It was 1/2” drywall on the walls.

[@tomitoth1806]

Beautiful, Thanx for inspiration. Great job. One more thanks from Slovakia. 😉

[@CReevesMakes]

Thank you very much! I appreciate that!

[@quirurgica11]

VERY GOOD

[@tonyhaemerlinck8372]

Amazing Job. good teamwork 💪👍

[@CReevesMakes]

Thank you Tony! It was a ton of work, but a lot of fun. It's good having a partner to bounce ideas off of.

[@nicolesmalls2392]

This looks really good job well done. Do you think this would work on a ceiling

[@CReevesMakes]

I would also glue them if you are doing a ceiling. Just in case! 😝

[@alwatts9713]

Just curious...what was done to make sure the pallets were safe and did not contain any harmful chemicals? Otherwise, looks really nice!

[@CReevesMakes]

I only used pallets that were in good shape and from a dry goods shipping company. I planed the boards and then sanded them prior to staining some of them and then adding clear coat to all of them. Not sure that qualifies as guaranteeing their safe but the wood all looked really good.

[@scottkimbleton4257]

For my pallet wood wall I used what ever pallets I could find. I decided to pressure wash all the boards since I left them all natural when I put them on the wall. kzbin.info/www/bejne/j4S7apStoMxlm8k

[@brianriley9259]

Beautiful!

[@CReevesMakes]

Thank you!

[@paulyoung5073]

God bless America 💚

[@peterbeukers1511]

out of curiosity, how will it look like after a few seasons of heat and cold? the wood wants to expand and contract so when you butt them that tight how bad will it start to buckle?

[@IEnjoyCreatingVideos]

Beautiful work! Casey! Thanks for sharing the video.😎👍JP

[@CReevesMakes]

Thanks JP! 👊🏻👍🏻

[@IEnjoyCreatingVideos]

😎

[@sairumkhan1234]

Looks great!! Can the dry wall tear cause of all the weight to it?

[@CReevesMakes]

Not at all. I nailed these all into the wood studs behind the drywall.

[@antimoralistru7928]

You rock!

[@CReevesMakes]

Thank you! We love sharing what we do!

[@wagnertnt1]

Parabéns,ficou top!!

[@scottmatthews9924]

What brand and color stains did you use? I love the lighter tones over the darker tones. Great job guys!

[@CReevesMakes]

I just mixed some old stains that we had left over. Nothing too drastic, just more natural and light browns. Most of this wall is all natural wood tone with clear water based poly over it. Thanks!

[@turiace]

What was your technique of dismantling the pallets so quickly? Also are you hitting studs with the nails?

[@CReevesMakes]

A reciprocating saw and circular were used for most of the dismantling. I used a hammer and pry bar for the stubborn ones. If you do not want to maintain the long length boards, you can just cut out the good sections with a circ saw. That is the quickest way. They also make tools specifically designed for pallet dismantling, but I did not feel I needed one for this project. Here is a link to the Pallet Buster www.amazon.com/dp/B01MR4D17F/ref=asc_df_B01MR4D17F5273417/?tag=hyprod-20&creative=395033&creativeASIN=B01MR4D17F&linkCode=df0&hvadid=198085543659&hvpos=1o8&hvnetw=g&hvrand=12823570314425868562&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9021523&hvtargid=pla-319839169325

[@Roy20Anderson]

Where do you get the pallets from !?

[@CReevesMakes]

A friend who works at a shipping company saved them for me.

[@darekmichalski6955]

Good job👏👏👏👍✌

[@gauravm8043]

Very nice

[@CReevesMakes]

Thank you very much!

[@mariosanna2343]

Bello bravi 👏👍

[@CReevesMakes]

Thanks!

[@superhall229]

Ya'll have the same hair cut. coooooool.

[@emilantosik2335]

great job :)

[@libettrick]

What was the final application you were applying after the board were installed on the wall?

[@CReevesMakes]

Clear Polycrylic finish by Minwax. 3 coats

[@maverick040690]

What finish are you using? Did you just stain and no oil or varnish over the top?

[@CReevesMakes]

Only a couple of boards were stained with some old Minwax that we had. The clear coat is Minwax Polycrylic in Satin

[@maverick040690]

Thank you! It looks great! :)

[@andzejnusz300]

super robota !! polska pozdrawia

[@comedycenter4061]

Hi, so this work on cemantic walls, would the glue stock well?

[@CReevesMakes]

Do you mean ceramic? I would remove the ceramic tile first and get the wall as clean and flat as possible. You would need to use glue or find the wall studs or framing to attach the pallet slats to. Good luck! Thanks!

[@chazmusic4414]

How many full pallets did it take to do this wall? Looking into doing a project like that. Trying to estimate how many pallets I will need.

[@CReevesMakes]

I had roughly 30 different sized pallets and did not use all of them. I had a bunch of left over wood so I just took the best boards for the wall. Good luck!

[@CReevesMakes]

I had roughly 30 different sized pallets and did not use all of them. I had a bunch of left over wood so I just took the best boards for the wall. Good luck!

[@scottkimbleton4257]

I also used about 30 pallets for our 8'x12' pallet wall. I only expected 5-6 good boards per pallet and I needed 26 rows of 3-4 boards. kzbin.info/www/bejne/j4S7apStoMxlm8k

[@cohenhix9612]

Great job! Interested about what color stain you used? I’ve been asked to make my sister an accent wall in her bedroom.

[@CReevesMakes]

I just mixed some colonial maple, English chestnut together and rubbed it into some of the boards. Only a handful of boards have stain. Everything is covered in a satin Polycrylic

[@CReevesMakes]

I used a blend of early American, English chestnut, and colonial maple from Minwax and then coated the wall with Minwax Polycrylic.

[@MrAlexptz]

Отлично, просто и красиво)))😉😉😉

[@ramzizaouia3657]

Great creator

[@CReevesMakes]

Thank you very much! 👍🏻👍🏻

[@jacobellis8135]

since you ran all your boards through the planer, how come you decided to have them different thicknesses?

[@CReevesMakes]

Hey Jacob, the thought did cross my mind, but after seeing how the boards were looking, we decided that we really like the dimensional look of different heights. Being that all the boards were random lengths and widths, I felt the thickness should be random as well. Call it personal preference. Thanks!

[@agenorfilho9947]

Ficou muito top, Massa, show de bola.

[@gepoma69]

Precioso trabajo

[@CReevesMakes]

Thank you Gemma!

[@rickdacus1818]

what finish did you use

[@CReevesMakes]

Just Polycrylic from Minwax. Satin sheen

[@rickdacus1818]

Too many steps with minwax. Sand 3 times, 3 coats of stain, 1coat of polyurethane and then steel wool.

[@pitman2911]

Well done 👍 👍 👍

[@CReevesMakes]

Thank you very much!!! 👍🏻👊🏻

[@cherszt]

czy ściana na której są mocowane deski jest zrobiona z płyty gipsowej ?? czym są mocowane ?? czyżby gwoździami ?

[@CReevesMakes]

Translated for viewer: Deski są przymocowane do płyty kartonowo-gipsowej za pomocą drewnianych kołków. Użyłem niewielkich gwoździ, aby utrzymać deski na miejscu. Do naprawdę małych kawałków dodano klej. Dzięki za oglądanie!

[@redfredzgred]

Good Job

[@CReevesMakes]

Thank you Fred! We still love it and it looks as good as the day we did it.

[@vickyjhutty1]

Awesome work 👍👍👍 I just wanted to know what did you use wood stain or just waxed it.

[@CReevesMakes]

Brinder, sorry for the delay! I used Minwax Polycrylic to seal the wood after we put it up. Some of the boards got regular Minwax stain.

[@reynocash3109]

How much can I charge for this work? Is for meter or wall?

[@strangerdanger4212]

I'm about to do this and was wondering if there was a reason you didn't just use finishing nails on the studs without the glue. Thanks for the video and any info.

[@CReevesMakes]

Hey there SD, I did not glue every board. The little spots that see me using glue were when the small board fell between two wall studs. There was nothing behind the drywall to nail to. Everything else was shot into stud using 2" brads. Thanks and good luck with your wall!

[@25wsmfan56]

What gauge Brad did you use

[@CReevesMakes]

2” 18ga brads.

[@pkk639]

Did you varnish it at the end? If so, what with please? Looks amazing!!

[@CReevesMakes]

Thanks! I used Minwax Polycrylic and it worked great!

[@CReevesMakes]

Thanks! I used Minwax Polycrylic and it worked great!

[@JudiChristopher]

@@CReevesMakes That is water based Polyurethane.. right?

[@CReevesMakes]

Yes, water based Polycrylic

[@JudiChristopher]

@@CReevesMakes Thank you for your reply.

[@iyaz6145]

What kind of brad nail gun do you use and what is the size of nails

[@CReevesMakes]

It’s a Bostitch 18ga and they were 2” nails

[@unitybasketball507]

Great work! How did you attach the paletts to the wall? Newbie question I know!

[@CReevesMakes]

Hey no worries! Your question is perfect. I used 2” brad nails along with some random spots of liquid nails. I marked out all the studs and added brad nails where ever I could.

[@krazymammaw3040]

Could you do a tutorial on tearing apart the pallets that is easy as u made it look please

[@CReevesMakes]

Check out Paul Jackman here. I used the same basic concept to take all of the pallets apart. Just watch for nails and screws. kzbin.info/www/bejne/mqXViICoj82JeZY

[@michaelwchristen]

How many pallets snd how big was the wall

[@CReevesMakes]

About 15-20 pallets and the wall is 8’ x 12’. Thanks!

[@risewoodworks1754]

Those can lights make such a big impact on the wall, freakin love it! Nice work man

[@CReevesMakes]

Thank you Daniel! I am glad I added them. They really set the wall off. I also added a dimmer.

[@djhotchocolate1]

What kind of stains you used?

[@dlawsonlawson1582]

I thought about doing this but just buying cedar fence pickets

[@CReevesMakes]

I did that in my shop and it was cheap and looks great!

[@CostantinoLenzi]

Crazy

[@marioosoreslopez618]

con que la pintas ?