It remains a mystery to me why of all the known methods creating a gear, Dave showed exactly this strange way ... Merry Christmas to everyone!
@CADPLMGuy4 жыл бұрын
This is the suggested technique from the PTC Knowledge Base as stated in the description.
@dacoach0114 жыл бұрын
Hi nice tutorial. Have had fits with many gear generation methods over the years. Seems like PTC should just build in a a simple gear function and save us all some grief. Anyway around 9:50 you talked out variable root_circle_diameter and used constant 8 when relation wouldn't verify, because earlier you declared root_circle_radius. Great videos. Keep up the great work!
@CADPLMGuy4 жыл бұрын
Based on the research I've been doing, I don't think there is a simple gear function. The design of gears is extremely complex involving a lot of design and manufacturing functions. I know other CAD packages offer automated gear generation, but I suspect it might be highly simplified.
@lucapusterla29464 жыл бұрын
Hi Dave, a weird and weak method in my opinion, as it’s difficult to adapt to other situations. A good parametric model should have definition of primitive diameter, module, pressure angle, etc, etc, etc. I think much better to use curve by equation for tooth side and having all gear parameters to easily pass from a gear to a different one. A correct pattern should be obtained by an extruded cut and an axis pattern. Anyway thank you for working during vacation too!! Merry Christmas from Italy!!
@Chanakya50BC4 жыл бұрын
Agree. It is easier to define it using Datum Curve, 'curve from equation' using standard gear terminologies like module, pressure angle etc.
@CADPLMGuy4 жыл бұрын
Wait until next Wednesday’s video. As I stated in the description, I’m demonstrating PTC’s suggested technique from their Knowledge Base.
@MohanRaj-iu4tb4 жыл бұрын
Thank you so much . It was really helpful for me .
@CADPLMGuy4 жыл бұрын
Thanks, Mohan!
@dinardwirachmadi5742 Жыл бұрын
Hi i have a question, how can we calculate the diameter ofinvolute of spurs gear?
@babluvashisth83444 жыл бұрын
When we make pdf of details of product dimensions then in pdf the line are bold/thick so in pdf not seen the actual arc how we make thinner these lines in drawing
@babluvashisth83444 жыл бұрын
Sir how we make details drawing dwg files without any changes when we make files its dim. Colour or dim. Style will change when we open in autocad this file
@cadinsider9644 жыл бұрын
No way. if u try it for different number of teeth the what? you have to again model everything?
@CADPLMGuy4 жыл бұрын
No way. It’s parametric based on the number of teeth and module. Although I think I screwed up the mirror angle in one of the videos. Should be 360 / 4 x teeth.