CRF250L Speedometer Calibration 12 O’clock Labs SpeedoDRD

[@scottellingson9717]

Just got one of these for my 20 CRF250L. Exact same setup as you. Used your numbers and have a 100% accurate speedo now. For a side note, the plug can be released from the frame and pulled out for easy access. I did that because I ended up bending a pin on that plug trying to hook it up with that tight fit to get back there. Amazing and easy product.

[@johnbatzakis7808]

Just ordered one now to fix the same gearing as you dads. Thanks for the video great help

[@DadsDomain]

Perfect, it’s a great mod. If I ever change my bike I will nab one too

[@SammyBenitez]

Just did this on my 2017. Used your link, thanks! Couple things: I have 13/45 sprockets, I did 24.2% and seems pretty accurate up to 45mph. I think I have stock tire specs. When removing the blue speedo plug, grab it with pliers vertically. I kept trying horizontally and couldn’t figure out where the pressure point was. It’s on top “rear” (when you come in from left side the part closest to you). Just squeeze and grab.

[@icebawkz]

They make an awesome device for fixing your flasher rate after changing out those hideous blinkers or a rear fender delete kit as well!

[@DadsDomain]

I hope Honda updates them to led in the future. Time for them to go!

[@nickduarte1778]

Can’t wait to see what this videos got

[@CRAUGHISOVERLORD]

Great video! That clip can kick rocks!

[@kylewood17]

What phone holder were you using on the handlebar?

[@rokbottom999]

Bad ass garage!!

[@DadsDomain]

Started as a place to park his truck and car and then we kinda took over and now its a pretty cool place to hang out!

[@oscar2500]

does changing your sprockets effect ones odometer? And if so i’d assume this would fix that issue as well?

[@DadsDomain]

Yep you need this to fix it. On the old gear driven speedos you could change sprockets and not worry but not it all runs through the compter

[@FarmNFun21]

I always enjoy your videos very informative. I'm interested in the brand and where you got the rear rack for the 250L ?

[@DadsDomain]

Thanks for the compliment. My dad said he got the rear rack at credibly.com

[@davidwima5965]

Not sure if you can do a after market speedometer wiring to the HONDA CRF 250L Video please if you can ? There is nothing out there for it in detail.

[@andrewcotnoir587]

Did you use the GPS mph section or did you use sprocket size and tire size section on there website?

[@DadsDomain]

We used their website. But according to the gps it was spot on

[@andrewcotnoir587]

I'm gonna use the website has well but it has two different ways to get the % either gearing and tire size or doing it by speed

[@randersson3672]

They have changed the design, the one I have is smaller...but a great device 👍

[@DadsDomain]

I had no idea they have a diff one. Thankfully his battery area was a good spot for this one but smaller is better for these types of things.

[@patrickcarney3110]

Does this device stay in place? Or is it removed after calibration?

[@matthewmorrone883]

It stays installed to the bike. The device is always correcting speed

[@theravedaddy]

Thats a great bit of kit! I could use 1 of those as my gearing/tyre combo reads 160kph @ around 90kph. And the bad news... you got caught by the new bot name cylixir. Ive sussed most of it out now. It subs to anyone interracting with it. It got me today when i warned another of my channel hosts so now i got weeks of reporting and blocking to get rid of it.

[@DadsDomain]

Thanks for the heads up again, I deleted the comments and hid the user.....we'll see if it does any good!

[@theravedaddy]

@@DadsDomain theres finally some detailed videos up about him, search tom the spambot.

[@Hugo_Alex]

Did you noticed if it corrected also the odometer? I have a 13/40 and I've noticed an increase on the speedometer and odometer also.

[@DadsDomain]

His odometer was always at a disagreement with my 450l. I never did a longer gps test so I don’t know honestly if it corrected it

[@achievementsman5725]

how does it change the speed if the speedometer reads off the front tire?

[@matthewmorrone883]

If i bought a bike and it had different geari g how do you reset the healer back for stock gearjng as Ive just installed kn my bike?

[@kevinmiller4815]

Great video very helpful thanks

[@zuul6929]

What app did you use for the MPH?

[@DadsDomain]

Speedbox is the name of it. Used it on my old suburban once too when it’s speedometer went out. Laid it right on the dash.

[@yamkaw346]

How did you calculate you needed -16.6? I have the same sprockets as you and the 12oclock labs website says I need -11.6

[@DadsDomain]

That’s odd as I just went to their website on my phone and plugged it all in

[@josephwinkler4863]

I kept the stock 14 tooth on the front but I put a giant 48 tooth on the rear and I’m showing a 5 mile an hour difference if the bike says 45 my GPS says 40 the part that really bothers me is that means it’s ringing up miles faster alsoOr at least I think it is but thanks for the video it’s very helpful

[@craigcook1571]

How/where can I get the app for my phone like you have?

[@DadsDomain]

On iOS the app I use is called Speed Box

[@timlong8467]

Great vivid,,,,,,, but y wouldn’t. U see it through the speedo to top end speed? It’s not that fast?.,

[@DadsDomain]

It really isn't that fast and if you look closely when I took it to 65 I was holding it wide open. I'd need a long straight away to do it and those roads surprisingly have a lot of sheriffs parked out on them out there.

[@scottloudon14]

It's a nice piece of kit, although it would be nice if it converted to KPH. Granted not everyone Drags these out of country.

[@DadsDomain]

Thats still a fair request though and it wouldn't be hard to implement if they wanted to program it

[@ElementofKindness]

It does do KPH. The device is simply a percentage converter, so it doesn't matter if your speedo is registering in MPH or KPH, it will correct the reading to whatever percentage change you program in.

[@plotholedetective4166]

My garage is probably twice the size of yours but you have at least 5 times the walking space... I need to dejunk

[@DadsDomain]

When my dads truck is in there we have zero room, he's hoping in a couple years just to have something basic built to store his truck so the shop can always be that open.

[@ljsablad04]

My brother can you help me tp set up my triple a speedometer for crf150L, seems when i change my rear sprocket to 46T from 49T the speedometer seems getting slower, don’t know what happen, wanted to make in it accurate as same as gps as possible so please help me, thanks happy new year

[@DadsDomain]

Did you install the speedometer correction unit and calibrate it? On their website I did a quick test and it shows you need a -6.1% www.12oclocklabs.com/sdrd_calc.php

[@ljsablad04]

@@DadsDomain the speedometer correction same as what you install on your bike? Sorry i’m confuse.

[@regianeduarte2000]

Cool video

[@DadsDomain]

Thank you! Nice that its warming up now

[@regianeduarte2000]

Lol in NJ mid April it was hailing

[@umasapkota4671]

Can you reset speedometer to 0 after 14k ?

[@DadsDomain]

No, thats illegal at least here in the states

[@BWHSCYCLONES708]

when using the 12' oclock labs kit and site do i need to re-adjust everytime i change my sprockets? say if i have 17' sprocket stock and went to a 18' or so do i need to re-calibrate for the 18' or would it already be input from stock calibration?

[@DadsDomain]

Yes, with every gearing or tire size change you'll need to update it.