Cronus Zen - How to setup Mouse and Keyboard on PC

[@RM-cf2xq]

I wish you'd have explained more in detail with the wiring and where you connected it all. It'd have been a complete guide then.

[@shennk4085]

you dont have to do any of that, his setup is just so he doesnt have to keep pulling out usb from zen to pc

[@ebbownee]

@@shennk4085 I'd still like to know is connection configuration. I purchased all the same stuff. and I can not get it working properly.

[@arpmanny]

i just purchased the same stuff to, did u ever figure out how to setup the sabrent switch ?@@ebbownee

[@blazzer73553]

@@ebbowneeexactly that , what a useless video.

[@DannyScott-e9m]

The new zen has different ports, would love an updated video

[@sams3968]

Do you think you can do a step by step tutorial on how to set up the USB Swithc and USB Hub? I bought both of them through you links but I'm having hard time setting them up properly. Thank you!

[@emtunderwoodMedic7]

Can you show a diagram of how you have the hub and switch setup and where your mouse and keyboard is plugged into?

[@alessandrocantarelli5779]

Good idea

[@dr1v3rzzzz]

Yo. Thanks a lot for this, helped me a lot.. Although I still have few issues: 1. Once Cronus is booted - I can still control my PC.. 2. If I launch the game, switch to Controller, the whole screen appears like with the layout of controller (press Y to this, press B to go back etc) 3. My mouse is super irresponsive - I have to move across whole my desk in order for the operator to turn a LITTLE bit.. Any advise on above would be greatly appreciated, my brain hurts

[@iSilvus]

got this aswell, what mouse u use ?

[@dumb_hole]

play honestly lmfao

[@gondaljarrat8864]

i have only pc this can work with out any consle or playstaion??

[@GL0ZZ3NTechReviews]

Yes. I also game on pc now

[@djpanfa2211]

do you have the button layout for keyboard and mouse. ive only played on the pc and not sure what console buttons i need to remap to the keyboard and mouse to be as close to the pc k and m button layout.

[@keulegg]

Can i use this in the other direction? So that that the Chronus gives you controller aim assist with a mouse on PC ?!?

[@pekho8544]

Can you make video.. cable by cable connections Zen/mouse,keyboard/PC with Sabrent..thanks in advance

[@obietaco6437]

I have the same setup with the same hardware and this is my configuration. KB & Mouse connects to the input ports of the sabrent usb switch. output 1 usb A cable direct to PC USB 3 port. Output 2 usb A cable to Left usb port on Zen. micro usb at rear of zen connect to sabrent USB hub using micro USB cable provided with the Zen. Connect USB hub to PC USB 3 port. doing this will give you switch Setting 1 - KB & Mouse direct to PC. Switch setting 2 - KB & Mouse to Zen to USB Hub to PC.

[@pekho8544]

@@obietaco6437 well i bust my ass off trying to set this but doesn't work for me...when I switch I loose M&K and I don't have M&K indicators in Device section

[@jeddi209]

Can you follow up with some kind of connection diagram or another video on how you connect the cables? This is a showcase, not a how-to video.

[@ViPeRGtXHD]

Hey, is there anyway you can do a video on how to set up the zen with the sabrent switch please. I cant work it out. Be a big help. Thanks.

[@wrldwz]

yeah, make a movie how u set up the zen and usb. show all

[@shaunsparks7139]

I have followed your guide but still can’t get mouse and keyboard to work help please

[@idexbonus8927]

Did anyone figure this out? I’m stuck to

[@d3us3xmach1na5]

Plug the keyboard and mouse into the switchers front. Plug the output of the switcher into the Cronus Zen and the USB hub. Plug the USB hub into the computer. Run the usb from the Cronus to the hub. This allows the Cronus information jack to connect direct to pc and allows the keyboard to be switched between pc and Cronus emulation. Good luck

[@danielekw26]

@@d3us3xmach1na5 hello could you please make a video with it as I’m really confused I try many times and still nothing at all

[@ViPeRGtXHD]

Right I figured it out what goes in to the zen is one of the wires from the switch I just used the 1st wire and then you put your keyboard and mouse in to the switch I put it in the 2nd and 3rd port of the switch and that worked for me. Hope this helps people.

[@ViPeRGtXHD]

I might of put one of the switch wires in to the pc but not sure I stopped using the zen so if the 1st part don't help then put one of the wires in to the pc and then that should work.

[@GL0ZZ3NTechReviews]

you plug your MnK into the female ports of the switch and you take one of its male plugs and plug it into the PC and take another male usb plug and connect it to your Zen. When you tap the button, it will switch between the devices

[@fwncy8861]

thanks for the settings, still can't get rid of the acceleration, i want to get that 1:1 feeling, i read every post on the forum and still can't reach that, and you are the most expert i can find so please if you can help me with anything to remove the acceleration.

[@GL0ZZ3NTechReviews]

The acceleration is put in place by the game. Cronus does not interact with any game code, so you are at the mercy of the game developers. Using a linear aim curve and adjusting the sensitivity slider in your mouse settings is how you counter this, however these devices work by emulating a thumbstick, so the slower you move your hand, the less thumbstick percentage is sent to the console. For a quick flick of the mouse, you tellign the console you simply flicked the thumbstick off to the side and released it. The game tried to make it easier for controller users to aim so they add acceleration to try and prevent you from over aiming. You simply need to adapt - just like using any other MnK translator.

[@jonsnow2555]

Try connecting a controller to the left plug in side, and then connect your mouse and keyboard to the front sides. It makes it feel more native with less of a delay/ acceleration

[@jimmygym2383]

Have you tried playing on linear too?

[@GL0ZZ3NTechReviews]

@@jimmygym2383 I actually JUST released updated setting on the forums. I have them fine-tunes pretty nice.

[@jimmie2012]

Can you do a video on how you have the usb switch and the other usb thing hooked up

[@Butchertypes]

Hey man can you please upload your keyboard and mouse settings for warzone? im struggling to set this up :( Thank you in advance

[@bobsyphilip6548]

broii did u fixed the mouse & keyboard ?

[@bitcoinsteve6471]

how about u just grind and practice.. and NOT CHEAT!! duh!!! it amazes me how there area actually so many cheaters

[@sujatadesai1]

Earlier post* Having trouble figuring how the USB wires should be connected. I bought the same Sabrent USB switch. (Here is my “understanding” on how it goes.) 1) mouse and keyboard to sabrent usb switch slot 4 and 3 2) sabrent USB output cables : 1 cable to pc the other to the Cronus zen front USB slot. 3) Cronus Zen back micro USB to pc. But when I try and play WZ (pc) it doesn’t let me switch the Sabrent so the Cronus Zen can take over. Like it doesn’t read it. Really need a how to video on how the connections should go Same issue. Thank you for your video. I bought the same set up as you did as I want to use the cronus zen on my PC. Can you got over how we set this up for us PC users?

[@andynxtdoor]

ive just got the zen,and im having a real hard time setting it up to use on my pc...do i need 2 mice and keyboards to set it up?i could really do with a hand setting this up.

[@N1tROxMWA]

same

[@GL0ZZ3NTechReviews]

I just made a video to show you whats up :) kzbin.info/www/bejne/b3STpnuaeal0jLc

[@mrxyz3058]

Hey... Can you tell me why my keyboard doesn't work? I connect all like you. Mouse work and cronus also... Only the keyboard is off.

[@Nuzzy]

please make a video on how to setup everything with your usb hub and switch cause I bought everything but its very confusing trying to setup it up trying to use your video to learn. Thanks

[@GL0ZZ3NTechReviews]

have you watched my potato cam video where i explain how to connect everything?

[@zacharymertens3628]

Hi, having issue when loading up warzone - when trying to change the device input to controller the setting is locked... Please help

[@hagaihanoch]

did you fix it? i got the same Problem

[@harryhalscheid7190]

Same

[@ninopeters793]

Same any fix for this?

[@romanseranek8998]

Hi, same problem here. Any fix?

[@mrep3739]

Are there any videos on how to put the wiring

[@F.B.I-USA]

Can we get a in depth tutorial on cable setup

[@envygotnext9402]

did you ever figure it out?

[@F.B.I-USA]

No unfortunately not the mouse and keyboard setup I did figure out how to get it to work with controller but I dont want that as every game is not smooth with the controller

[@dctalon82]

Can u make a video of how u wired all ur setup?

[@GL0ZZ3NTechReviews]

I already have one up bro :) check my potato cam videos

[@ercwoodworks]

How does the wiring set up from the hubs go?

[@dctalon82]

Id like to see that too

[@MLGInfidel1]

I've been using the XIM for years with the XBOX. I saw your video where you connected the ZEN and the XIM together. What is the advantage to this combination vs either separately.

[@GL0ZZ3NTechReviews]

The Zen is basically a reprogrammable modded controller adapter on steroids so you can use mods like rapidfire and antirecoil or program other macros to make life easier

[@MLGInfidel1]

@@GL0ZZ3NTechReviews thanks for the quick reply, I assume then I could macro a spring jump which I just can't do with the XIM ALEX , I may just.have to pick this up. Thanks again

[@JuneBeforeJuly]

@@GL0ZZ3NTechReviews so you could use a xim and an zen together? In doing so will I be able to get the anti recoil from the zen while getting the benefit of using mkb from the XIM?

[@J0HNWICK]

@@GL0ZZ3NTechReviews Sorry, i do not understand, where is your mouse cable insert and your keyboard. Your both switches are insert into your PC?

[@ohmyside9361]

my problem is not getting the keyboard to be recognized in modern warfare while the mouse works fine an the zen detects the keyboard. do u know a fix?

[@prcgame5856]

Have same problem could you fix it?

[@tchewolf5313]

have the same did you fixed it?

[@HawaiianGravity]

I lost it when he said "the printer isn't going to work with the zen" idk why but I thought it was hilarious

[@JonSnowTM]

Hey bro I just wan to say once again thanks so much for everything! I can’t wait to see the updated Overwatch scripts for cornuszen from you :)

[@paramveersidhu4231]

@EagleSquad1 you have to put it in the side

[@engnozdmr]

Thank you for video. Can you share a picture that shows the cable connections? I must be doing something wrong.

[@GL0ZZ3NTechReviews]

Yes, I'll record a quick video showing how to get setup without using a USB switch so everything is easier for people who don't have one or don't want to pick one up

[@edgarcousin6847]

@@GL0ZZ3NTechReviews where’s that video. I’m trying to connect the zen and the sabrent switch without the hub and I can’t get the keyboard or mouse to work

[@prezzbelikeme]

@@GL0ZZ3NTechReviews pls do. I need to know too! Thnx.

[@NemesistheBoss]

That is the video what i have been waiting for....+10😍

[@GL0ZZ3NTechReviews]

Glad it helped you out man

[@actuallywill]

meaning youve been waiting for a video to help you cheat in games cause...why? that thing is considered scripting/modding on console (which can get your entire account perma banned, not to mention on PC, its just staight cheating, which will get you banned, and laughed at. dont cheat.

[@GL0ZZ3NTechReviews]

@@actuallywill dude, i've never been banned. the cronus is cannot be detected... learn wtf you're talking about before coming over here and runnin your mouth because it makes you look dumb AF

[@NemesistheBoss]

@@actuallywill no no.. i have playing destiny2 for 2000h+ and they punished mk player with %40 increse recoil aginst controller players. Meanwhile bungie highly decrease recoil for controllers like a laserbeam. So why do i suffer for this shit desicion?

[@exsicario]

i connect the mouse to te zen and it dont recognized it no curso. plz help me.. can you make a video how you set your hubs And usb switch plz I’ll appreciated.. I don’t get it when you press the switch to control your mouse in the pc when your mouse is connect to the zen ..

[@N1tROxMWA]

same

[@OPTSXFilosoofis]

Hey man, I've been trying this on siege and warzone but my mouse doesn't move well. Either it is too slow or it goes all over the place. My values are deadline 75, acceleration 90 and sensitivity 12. Polling is 250 and DPI 4000. I don't understand why it doesn't work well

[@-clickhere]

Play Siege on PC, that should fix your issue.

[@royemblem2777]

It possibly could be the polling rate, 1000hz will respond better and be more accurate.

[@infinity5420]

@@royemblem2777 thank youuu

[@sickly2173]

Stop cheating on siege cause u are bad

[@iPhysQ]

@@sickly2173 Is that why you search up the How to videos for Cronus?😂

[@jwyeager2261]

Can you provide information on usb hub…can’t find one with the switch button

[@Kayehx]

So my mouse works just fine in game and in the device monitor. However my keyboard does not. It is being detected by zen studio however when I use the device monitor to check for inputs there are none. Does anyone else have this issue and have a solution? Thanks

[@michellangston1448]

I got same issue!? You figure it out yet?

[@Samer7harb]

i made everything but when i enter the game the player stuck but only fire without moving any solution ؟

[@_kuripot_gaming_3088]

Hello, is it possible to use m&k that’s not branded? I got a gaming set but not logitec or Corsair but my cronus is not detecting it.

[@GL0ZZ3NTechReviews]

Yes, but it depends on the mouse or keyboard itself. I know corsair keyboards will need to be in bios mode, I use a logitech G502 mouse with no issues

[@zoubirzouba3730]

Hello why are my keyboard and mouse not recognized? Thank you

[@mauritsbuskens6595]

Maybe don't hack😌

[@upcominggamestrailers]

Hey glozz3n, if we dont have usb switch, we have to unplug/plug cronus manually zen ? (instead of pushing the button like you did)

[@GL0ZZ3NTechReviews]

That is correct

[@upcominggamestrailers]

@@GL0ZZ3NTechReviews hey glozz3en, is there anyway to increase sensitivity ? i have 10,000 on my mouse program, 100 in cronus zen, but ingame it still really slow. Like a 90° if i use all my mouse pad. Thanks

[@jonsnow2555]

Been waiting 4 this one, you the goat, liked amd subbed

[@GL0ZZ3NTechReviews]

Cool man, glad I could help you out

[@ryuk5329]

@@GL0ZZ3NTechReviews how can i get aim assist on fortnite with the zen on mouse and keyboard?

[@actuallywill]

@@ryuk5329 aim assist on mouse and keyboard is called cheating. and if you try it on console, its still cheating. you're risking getting banned for scripting and modding contorls on your entire xbox all because you can't practice and get better? come on now.. lmao enjoy the ban

[@ryuk5329]

@@actuallywill ok but why are you here ? I mean you watched a video about the topic you think its cheating? I got get it it seems like you want to "cheat" as well

[@jonsnow2555]

@EagleSquad1 controller plugs into bottom left, mouse plugs into bottom right and the USB from the pc plugs into the top

[@harrykavalary7275]

Can you please provide a simple stick diagram of how you used the usb hub and the switch?

[@GL0ZZ3NTechReviews]

Already made one. Check my potato cam video

[@balldip]

I’m literally doing all of this for deadshot daiquiri’s aim assist in bo3 & cold war zombies 😳

[@braydengc1762]

liking your own comment 😳

[@billycoles2674]

Liking your own comment 😂🤣🤣😂🤣😂😂🤣😂😭😭😭😭😭

[@samuraib0b]

Any luck on the Wireless K585 or any wireless keyboard with the zen?

[@kjagal]

I have a mamba razer elite Followed all the step by step instructions And the cursor is frozen solid Only buttons work in the zen studio when i run the circle test , but the cursor is Walt dissent frozen Any tips or help ? Greatly appreciated Thanks

[@BJ-uncensored]

When your mouse and keyboard are plugged into the ZEN, windows sees them as a controller. You'll need a 3rd party app to use your control as a mouse when not in game.

[@SPRCOOL]

Can I use a wireless mouse ??? plz answer

[@GL0ZZ3NTechReviews]

some of them work, idk which ones. I dont use wireless mouse because of the extra lag they have vs a cabled mouse

[@TheSaltyyOG]

Can you show how you have he hubs mounted and wired together ? And the button that switches from controlling the pc to the zen

[@OnlyRemorse]

Is there a guide like this but for Apex?

[@GL0ZZ3NTechReviews]

yes, i have on in my videos

[@l.a.sportsnationbrasil4725]

Please make a video showing how put the cables in all these ports, i dont know how connect here! my K is not working!

[@Caliburn1995]

Can you show it without tbe switches?

[@NemesistheBoss]

Could you pls write your extra equipments name and brand which you showed us (switch button and multi-usb port etc.) Thx

[@GL0ZZ3NTechReviews]

Yes, will link in descriptiom when i get into office today

[@GL0ZZ3NTechReviews]

USB Switch used in video: www.amazon.com/Sabrent-Computers-Peripherals-Indicators-USB-USS4/dp/B07RC8F2L3/ref=sr_1_4?dchild=1&keywords=sabrent+usb+switch+button&qid=1609762463&sr=8-4 USB Hub used in video: www.amazon.com/Sabrent-Individual-Switches-HB-UMLS-Renewed/dp/B07Q6L9XB2/ref=sr_1_8?dchild=1&keywords=sabrent+usb+switch&qid=1609762445&sr=8-8

[@NemesistheBoss]

@@GL0ZZ3NTechReviews is this enough for your setup ? anything else more?

[@redtetsuo1636]

i cant find that key mapping menue. doesnt give me the option under plugin tab

[@sayedfrank]

Can you make a video step by step how to connect all these before jumping to Cronus Zen ,, its hard to see all these devices connected in this video , Thanks

[@GL0ZZ3NTechReviews]

Check my latest potato cam videos bro

[@gialy1]

To use the mouse and keyboard do I necessarily have to pc connected? i can't use the devices directly to the console without the pc?

[@mharskigamingtv.472]

bro where did you buy your cronus zen housing

[@aimz-_-skilzz-_8488]

What are the keyboards that work on this piece ... in the console?

[@Slademon0000]

Does this mimic the gyro aim???

[@saints2551]

I have a azeron keypad n it shows a question Mark for keyboard like how it shows in the ur Logitech logo in ur mouse area

[@scottyork8397]

Can you make a video on how you have all three hooked together? So you can use the switch for mouse and keyboard?

[@GL0ZZ3NTechReviews]

Check my potato cam videos. I explain it better

[@scottyork8397]

@@GL0ZZ3NTechReviews neither warzon or cold war is letting me switch to controller in settings, any solutions?

[@scottyork8397]

@@GL0ZZ3NTechReviews any help would be great because I can't even get anything to register, not even an actual controller. I appreciate your videos and what you do! Thanks for any help!

[@skor1873]

this is awesome. Why when parashooting is super slow to turn anywhere? is like the sensitivity went back to 0 lol i can barely look around unless i pull the shoot?

[@TheDonz]

Will the Zen ever bring out a mouse output instead of controller outputs for PC? Just not good on PC games, especially for sniping as the movement is not like a real mouse

[@JuneBeforeJuly]

should my mkb be connected to my usb switcher or my zen? im on pc

[@terencepeter34]

plz tell me setting for mouse n keyboard for apex

[@arboogey8285]

So I could use one USB port on zen to my keyboard, and daisy off my keyboard to mouse?

[@mercy1704]

Did they make it more simple to set it up on M&K since you launch the video or it’s still the same like in the video

[@GL0ZZ3NTechReviews]

setup is still the same, but the hub and switch are optional and just what I personally play with so I can toggle between using my PC and using the Zen with the same MnK

[@waynesgamingtv]

i dont understand where the plugins tab is because you click library but dont show anything else?

[@mauriciomedrano2806]

Having trouble figuring how the USB wires should be connected. I bought the same Sabrent USB switch. (Here is my “understanding” on how it goes.) 1) mouse and keyboard to sabrent usb switch slot 4 and 3 2) sabrent USB output cables : 1 cable to pc the other to the Cronus zen front USB slot. 3) Cronus Zen back micro USB to pc. But when I try and play WZ (pc) it doesn’t let me switch the Sabrent so the Cronus Zen can take over. Like it doesn’t read it. Really need a how to video on how the connections should go. 🙏🏽

[@chrisroberts4978]

Is it possible to get the mouse movement as smooth as it is without the zen?

[@GL0ZZ3NTechReviews]

It will be like using a Xim Apex at best bro. At the end of the day, all of these devices are emulating a thumbstick. I switch to linear aim curve to get rid of alot of the wonky feeling stuff while aiming

[@chrisroberts4978]

@@GL0ZZ3NTechReviews ok thanks for the reply ill give it a go now setting up as you have and ill give it a test

[@chrisroberts4978]

@@GL0ZZ3NTechReviews im struggling get my mnk working at the same time again i had them working not so long ago ::(

[@SUPA93200]

what about if you don't have your usb hub to plug k&m? thanks for video

[@GL0ZZ3NTechReviews]

its not 100% needed. just makes life easier

[@SUPA93200]

@@GL0ZZ3NTechReviews yeah but what is the way to plug it ? Both front ports ?

[@XxGaMBLeRR]

Need help I did everything you said but when I go to plug the chronus into the Xbox one Series X. The controller works but mouse and keyboard doesn’t work at all.

[@JustinV911]

Same with ps5

[@actuallywill]

good, then you dont have to worry about getting banned. cause this shit is very much considered cheating

[@XxGaMBLeRR]

@@actuallywill can’t get ban for detectable Shit

[@itswarlos566]

Solved it guys??

[@Good_Things_To_Know]

what type of key board and mouse should i use?

[@PyReDZN]

I feel like I'm going nuts here, I've got the PC and Zen all wired up and I know the Zen is taking my inputs when i use the switch on the Sabrent, because when I use RMB + 1 (the same at LT + MENU), it toggles the pack I have on the Zen. I cannot for the life of me actually use my mouse and keyboard once it's hooked up to the Zen in a game, though. I know it's taking the inputs because I've tested it under the ZenStudio program and the inputs show up, I'm at a loss

[@Habviewinfo]

Hey bro, I bought the exact same stuff you have such as; Sabrent Sharing Switch, and the sabrent usb ports.. Im kinda confused what you plugged your M&K into and what wires go where lol

[@ViPeRGtXHD]

Same.

[@GL0ZZ3NTechReviews]

I'll make another video soon, one of the hubs I use is only so I don't have to crawl under my desk to plug in a USB to the computer, the actual switch is what makes using the zen easier on the PC

[@ViPeRGtXHD]

@@GL0ZZ3NTechReviews yeah its the switch I've got not the other thing I just want to switch between the computer and zen with one click but for the life of me I'm cant work it out what wire goes where.

[@GL0ZZ3NTechReviews]

@@ViPeRGtXHD Are you on discord of in any of the FB groups?

[@ViPeRGtXHD]

@@GL0ZZ3NTechReviews i have a discord. What sort of FB group? Whats baffling me is you only have 1 wire going in the front of the zen. I also have xim apex in to the zen as when I try and set up mouse and keyboard on the zen they don't work for me so I have to run through xim.

[@BackTrackMusic]

Hey bro, I use a controller on PC. But MW does not recognize the controller... Iv been trying to get it working for hours but idk what im doing wrong. I followed Zens instructions but my pc detects the controller but MW does not. Thanks!

[@georgechalmers2668]

Open up Zen Studio, go to DEVICE tab and the drop down box for Emulation Output: set this to XBOX 360.

[@GL0ZZ3NTechReviews]

switch your input to controller in the ingame options

[@BackTrackMusic]

@@GL0ZZ3NTechReviews The controller is not popping up its locked.

[@infodanielsandu]

Bro, sorry for my english! What do you have connected to USB Switch and what do you have connected to USB Hub , because I am confuse how many cable out there ? Thank you for your patience

[@GL0ZZ3NTechReviews]

no worries bro, please check out my potato cam video showing how to set everything up in more detail.

[@theonlysil2375]

why does my mouse and keyboard not pick up in game when I connect is to the zen

[@exsicario]

The problem that I have is that when I go to the game the controller tap have a lock it don’t let me Do anything don’t know how you have it like that unlock the only way you can unlock that is putting a controller at the beginning when the game start .. I wish you make a video step by step how you do it so we can fallow only with mouse and keyboard ...

[@GL0ZZ3NTechReviews]

unplug the zen from your computer completely, then only plug in the microusb from the back.

[@exsicario]

Ok thanks

[@grimmmz7800]

I want to use it on a pc. Do I need to buy a handle? I can use the mouse directly.

[@newera3757]

So what's the point? Why not to plug mouse and keyboard directly to PC?

[@GL0ZZ3NTechReviews]

Aim assist and mods

[@ntygamer20]

where did you plug your controller cable to your zen? left?

[@ntygamer20]

can i input ps4 controller? using in-game mouse and keyboard?

[@GL0ZZ3NTechReviews]

I didn't use any controller for setup because im only using the MnK on PC. But yes, normally you would plug your controller into the left usb port - which is called the auth port.

[@ntygamer20]

@@GL0ZZ3NTechReviews bro, do i really need to buy the switch? so i can use my keyboard? the mouse was okay, but the keyboard is not working but the lights are on.

[@Alex12640]

Could someone explain what the difference between the USB Sharing switch and the 4 button switch?

[@GL0ZZ3NTechReviews]

ok, the 4 button switch is ONLY on my desk because im too lazy to crawl behind my PC when I need to plug/unplug stuff - I use too many USB ports. The switch with the button on the cable is so that I can switch my mouse and keyboard from controlling the PC to controlling the Zen, because when they're plugged into the Zen, they are seen as an xbox controller so you can't use your pc like you normally would.

[@joshuascalf2555]

USB Hub used in video this has to be the only thing that is different and allowing you to be able to set it up different then I am able to. when I pull up devices its showing both console as an xbox that I dont have (im using PC) and a mouse. but when you are doing it all it is showing is your mouse no console.

[@sebailic46]

I tried this but my mouse is still not moving even keyboard not working..but zen detected both of them ....and when i conect ps4 controler on zen is detected but still cant play with him ?can you helo me out pls

[@XxGaMBLeRR]

Same for me. The controller turns on works but mouse and keyboard doesn’t work !!

[@XxGaMBLeRR]

Did you ever fix this

[@sebailic46]

No i didnt im talking with them over cronus help center but it takes to long to reply me

[@itswarlos566]

Still not fixed???

[@jasond5807]

I guess I came to the same video everyone else did. Keyboard working and Mouse not working in Warzone. I have that issue and have yet to resolve. Everything looks great in the M&K settings and it picks up mouse movement and keyboard entry. However once I startup Warzone and switch my inputs over to zen using the USB switch you have the keyboard commands all work great but nothing at all picks up on the mouse. My mouse is set as Emulation XBOX360 and Disabled for Remote slot. I have a Razer Deathadder Chroma mouse and have it set in Synapse to 10k/1k as instructed in everything I've seen. I'm stumped and I have tried everything I'd normally troubleshoot.

[@jasond5807]

Ok so funny enough deleted all my controllers on my pc and letting them recreate allowed me to use Joy.cpl and see that my k&m were showing as working Xbox 360 remote woohoo. That did not happen before. This was after switching to Emulator XBOX 360 and Remote Slot to Disable. So Warzone menu my mouse was active I was moving it around and it was registering as some buttons (still needs set properly) however it was doing something on the main screen which it was not before. Also my keyboard keys were all working as I set them up. AWESOME! Then I started a trial and it kicked me over to k&m (little message at the top right of the screen) not showing as remote anymore so can't move unless I swap back to pc on my switch. I then exited and the k&m shows up as remote again. So ok I go into a plunder match...sure enough everything kicks over to k&m again (and I get the same message that I'm now using k&m and need to exit game and go to menu to access options). Now I feel I am getting somewhere but Warzone seems to be against me now....lol

[@GL0ZZ3NTechReviews]

I just made a video to show you whats up :) kzbin.info/www/bejne/b3STpnuaeal0jLc

[@NexusDD]

Keyboard registers but mouse doesn’t for some reason anyone know a fix?

[@GL0ZZ3NTechReviews]

strange. what mouse are you using?

[@punchieau7409]

Hey man when I try to plug in keyboard and mouse to the zen only 1 will work at first keyboard worked and the mouse didn’t, now the mouse is working and the keyboard isn’t??

[@alexescala777]

Can you please make video how do your wiring please i can see it where plug the switch please i need your help

[@GL0ZZ3NTechReviews]

Check out my potato cam videos in my video lists

[@alexescala777]

I’m playing pc I can’t see your cable set up how plug the wires

[@alexescala777]

Please help me coz mine not working and I don’t know if I switch don’t work

[@glitch6935]

what is connected to PC directly and what is connected to USB switch?

[@TheItalianStallion13]

I seem to be having a problem with the game using my keyboard. It seems to sense the controller plugged into the computer but the Zen reacts fine to the keyboard for the menu as a controller.

[@jayjay4946]

Do we have to use 10000dpi on pc?

[@ombosted]

So if I understand correctly, what cronus zen does is emulated a controller and also add mods right? Then, when using cronus zen with M/K is gonna feel like using rewasd emulating a controller correct?

[@GL0ZZ3NTechReviews]

Youre correct in the way it emulates but wrong with the comparison.

[@dctalon82]

I see in one of ur vids you use a g502 with cronus....im curious dooes it work thru g hub when connected to cronus?i. Cant seem to get my g502 ghub to work through my cronus!!!it functions but im not sure if my settings are what they need to be on the mouse

[@bizzz.R]

Mouse and keyboard cables go into the cronus or the usb switch?

[@bizzz.R]

Having trouble figuring out how your cables are going

[@GL0ZZ3NTechReviews]

I plug my MnK into the female ports of the usb switch- then plug one of the male plugs from the switch into my pc and another male usb into the Zen's front usb ports

[@bizzz.R]

​@@GL0ZZ3NTechReviews When you say youre plugging in controller cable at 5:55 which cable is that? Having trouble getting warzone to read my mouse and keyboard through the zen

[@bizzz.R]

Just cant seem to have warzone recognize my mouse and keyboard when in game

[@bizzz.R]

@@GL0ZZ3NTechReviews one goes into the zens front usb port is the mouse cable right?

[@vincentvillanueva6081]

Will this work for apex? Been trying to find a video for it with no luck

[@rdexter6811]

I usually just leave the PC programming cable in the zen and I can adjust it as I’m testing. Is this not a good idea? I have 2 keyboards and 2 mice hooked up so I test my movement in real time and change the setting while testing and saving while zen is programmable. I simply have an Xbox 1 controller plugged into the side though. But I bet if I unplug the programming cable it will read the Cronus as just a 360 controller.

[@mikesanderson72]

I also have mine plugged into both the pc and my ps4 sits on top of pc. I haven't had any problems so far.

[@TonyTwoDrinks]

I've had my zen for 2 days now & I have the same layout but no matter what I do I can't get the ones connected to the zen to output once I start the game. Literally nothing happens in game, do you know how to fix it?

[@eagle_0575]

is msi vigor gk30 keyboard suitable for cronus zen?

[@jonsnow2555]

Is there a way to use the controller and mouse at the same time Instead of the keyboard? Like mouse in one hand, controller in other?

[@jonsnow2555]

Continued, would a xim apex help in that aspect? I saw a tutorial to plug xim into zen as well.

[@GL0ZZ3NTechReviews]

Yes, alot of people play with way. simply only plug in your mouse and only map what you need

[@afreat99]

How do i reset my keyboard button assignment entries?

[@Tastygreenbean]

I need help, I’ve done the mouse and keyboard settings and finalized everything my mouse works and so does my keyboard but they wont work together, I am playing rust on ps5. Will you please do a review like this but for PS5?

[@Orgoniks]

I bought the zen and didn’t realize it won’t work with my mouse and keyboard. Is your mouse and keyboard on the “list”? Also did you have to put them both into bios mode? Which m&Keyboard do you have?

[@GL0ZZ3NTechReviews]

I use a Redragon K551 and a Logitech G502. I know corsair keyboard need bios mode, im not sure which others off hand

[@danielb1621]

@@GL0ZZ3NTechReviews i have 2 keyboards from corsair... i keep reading this "bios mode" yet i cant for the life of me figure out how to even put them in that mode as iCUE software has no option to do so... and there are no switches on the keyboards themselves. and hints?

[@beastamory1354]

Hey bro i just subscribed to your channel thank you for the video! I play on pc and i wanted to stay on mouse and keyboard. I just got the switch you mentioned on amazon and also the cronus zen.. i havent set it up yet, but doing this setup will i get aim assist and no recoil? For warzone.

[@GL0ZZ3NTechReviews]

Thanks for the sub! And yes, you will just need to find a script to use - or grab one of the official gamepacks

[@beastamory1354]

@@GL0ZZ3NTechReviews thank you for replying, sorry might this sounds too much to ask! But is it possible to create a video for that? I searched entire internet and couldnt find it. You will really do huge favor for me and others 🤷🏻‍♂️

[@rjq8135]

@@GL0ZZ3NTechReviews do you have a discord or how do I message you

[@Veezyy93]

How do i get my mouse to act as my right stick and look around?

[@ivanlamesic1319]

Hi, can you explain it without an USB HUB and Switch. This is really confusing me and I think that many people have the same wish. I would be really thankfull for it.

[@jouyajadidi3327]

How is the delay with mouse movement and ingame movment? is it viable? or should I just get a controller?

[@GL0ZZ3NTechReviews]

I feel absolutely zero delay when tuned properly