Crosman Quest 1000x Pellet Test

[@jonneet2126]

Great group with the Sigs! I have a tin of the 7.0 grain Crosman domed. They are just horrible in every gun I try them in. I'm 68, and, yes, UT was devastating when I lost my mom. That was n 2010, and she was 91. So glad my wife and I took her on two trips before she passed. First, UT was Maui, and her first and only trip to Hawaii. She grew up on the beautiful Oregon coast, and wanted to make one last trip there. My wife and I took her there for 4-5 days, and visited the towns she spent her childhood in. I love that coastline to, and always envied my mom got to live there early on. I think about her all the time.

[@skinnymitchairgunbrotherho7152]

I saw that same video and I practiced that with my brake barrels. Squeezing the trigger just didn't work I had to pull it. And believe it or not my group's tightened up tremendously. Great video brother

[@ohshoot444]

I think it works best on lighter triggers. Most of mine are under 3 pounds.

[@modelnutty6503]

different with a light trigger but yeah I like to put a little weight on a trigger, then GO. always grip any-everything kinda firm both hands pulling some into my shoulder.

[@ShaminMike]

Doing good brother. Always nice to hang out with you for a bit

[@ohshoot444]

I appreciate the great comment Micheal.

[@garysnotsowildadventures3045]

Good shooting Travis. These results and several like it are why i stick with the crossman premier hollow points. Not bad for cheap pellets and where im at a whole lot easier to get.

[@modelnutty6503]

the CPHP did a pretty fair showing, scope seems to just drift+settle left... had scopes do that, adjust the vertical and the horizontal moves some too (grr) if it'll adjust to the right and stay put, I'd run with it a while more.

[@anthonybanks4633]

Love the long shooting videos

[@ohshoot444]

Thanks!

[@African-Budget-Pellet-Gunner]

Hi Travis, great shooting, I have seen the stoegers around here but haven't tried them yet, they are pretty pricy though. I also love Nick Vending's channel, he has a great sense of humor, really enjoy him. Looks like your weather is improving there as well

[@ohshoot444]

Nice long days again. Couple more weeks I’ll be covered up with poison oak and bee-stings lol

[@FirstStateAirgun]

Great job and very entertaining💥💥

[@ohshoot444]

Thanks Lou!

[@trophyhunter8615]

Don't get me wrong I've enjoyed every single video you have ever posted but I will have to say this is probably my favorite. Nice work buddy. I know it's against basically what everyone says but I shoot better when I snap the trigger instead of slowly pulling it. Enjoyed it buddy

[@LowkeyAirgunner]

I usually pull it slowly until I know it will break and then I dont really care 😁

[@trophyhunter8615]

@@LowkeyAirgunner if it has a long trigger pull I might pull slowly to begin with then I let it rock

[@LowkeyAirgunner]

@@trophyhunter8615 thats about it 😋

[@ohshoot444]

Thanks Trophy Hunter. I had fun making this one.

[@modelnutty6503]

@@trophyhunter8615 yup, a little weight on it (ready) then GO, if I can. can't with light ones.

[@LowkeyAirgunner]

Nice shooting buddy! Enjoyed the longer video the commentary was very good I want to order a hawke 4x32AO but im not sure if low rings (sportsmatch dovetail) would fit on my airguns? [I dont mind removing the rear sights on the crosman's but will the front sight be annoying?!] I know I wont be able to put it on my 1377 and maybe qb78 but lower sounds better at close range for hunting...you said you had low rings and an adapter, can you tell if it would fit good without the extra adaptor height or should I go medium? {Sheduled my carry permit class...-100$ yet haha}

[@ohshoot444]

I’d run medium rings at least if you’re not going to use the adapter.

[@LowkeyAirgunner]

@@ohshoot444 Thanks for the advice! [Thinking about ordering right now]

[@sebastom123]

are you getting these groups using the stock trigger? or is it modded with the 5 min job rc bearing mod?

[@ohshoot444]

That trigger was the slightly older one. I just polished everything in it no bearing. Used a ceramic knife stone.

[@christiannorris7673]

How would the quest compare to the optimus and vantage?

[@ohshoot444]

I've not had an optimus. But compared to the vantage, its a little better quality. The vantage I had was really bad though.

[@halfcirclehranch]

Do you ever do CO2 guns?

[@ohshoot444]

Maybe one day. I had that Diana. But, the guy that sent it was a creep. So, I ended up sending it back to him.

[@kenfan5666]

I think Diana has always been made in Germany. I've never heard of a made in China, or a cheap in price or crappy shooting Diana. Most of the cheaper made in China airgun products don't shoot straight because the manufacturer selects lower grade steel in the spring or other components to cut down costs. It is possible to select higher quality components and higher grade steel. Everything else is usually due to specs. Most airgun scopes are made in China. So if you think the product is cheap quality, blame the specs and the company, not the manufacturer. The average sales price in the U.S., of pretty much any made in China products has to be a minimum of six times the cost of mass production manufacturing in China to break even in the U.S. Manufacturing, packaging, shipping, advertising, stocking, warehousing/storage, utilities overhead, staff, and warranty account for the increase in price. Your average Chinese labourer makes $1.315 an hour or $13.15 a day(for a 10 to 12 hrs./day today), or $4,800 per year, assuming they work 365 days a year...and they don't get any benefits. Back in the early 90's the average Chinese worker only made about $2.00 a day or $730 per year. Most German companies know that if you sell out the blue collar work force, you end up selling out the industry but also end up paying more in unemployment benefits over time. Germans prefer precision and high quality versus cheaper, poorer quality. George H.W. Bush may have upgraded China from a Most Favoured Nation trade status to Permanent Normal Trade Status, and opened up the trade to the Chinese, but Bill Clinton f***** the American worker and citizen, more than any other president by shipping more jobs overseas and will be responsible for more American Servicemen dying because he basically gave away our manufacturing jobs, and missile technology to the Chinese. The next war will be fought against an adversary armed with US 4th generation military missile and air technology. Over the last 50 years, since Nixon, the US gave trillions of dollars in aid to the enemy. Communists who don't believe in the free market, and dictators who enslave their own people, butcher them for organ harvesting, and imprison or execute them for political dissent. Sorry about the rant, but it had to be said. Stay Safe, Be Well, God Bless.

[@ohshoot444]

Thanks for the recent great comments. I'm going to wait and respond to the others, because there's a few ideas for videos in there. Just wanted to let you know I'd seen them and I'm not ignoring you.

[@kenfan5666]

@@ohshoot444 Thanks for the acknowledgement and the great content. I am glad I found your channel. Just an fyi; I binge watched 13 videos and roughly 2 hours of my time. If you keep on putting out good reviews people will watch. So keep them coming. Stay Safe, Be Well, God Bless.