Crosskart build Pt 9: Steering update

Shorter update. Redid the steering angle and built the column
Insta / _jimboslicexd

[@timstewart567]

I like how you don't edit-out your mistakes because that's the reality of shop design and fabrication. I know it sounds cliche', but you really do learn more from your mistakes. You are doing an excellent job with your videos and teaching your craft.

[@jimkhana6881]

Thanks brotha 🤜🤛

[@Thewatson77]

Build , learn , take notes , and keep pressing on! She’s looking really nice tho my man 👍🏼

[@JohnNascimentoArt]

Loving this build. That is one sweet, sweet Crosskart. Awesome!

[@jacksonms212]

Hell yes , lessons that will never be forgotten ;)

[@ShoreGarage]

The idea you had of how to align the front wheel was great. Idk how I didn’t think of that. Subscribed!

[@000000000000000johny]

Bro I'm fricking loving your videos! pls keep it up! I'm a big fan of your work

[@royalracingtechroyalracing6128]

Looking so sick much love from upstate new York

[@stevenchandler4218]

ÒOOOP's .. we all make goof ups. I like how you don't hide your mistakes. Your Cross Kart is looking sweet. ✔

[@rigourmortis]

Sick looking kart 👍

[@williamsouth6345]

Man it looks awesome I bet that would be a blast

[@davidcart28]

Good job mate love your work

[@user-hx7zr3jh3d]

Keep this content your brother from Syria 🇸🇾❤️

[@garagebuiltoffroad9432]

Looking good man! I used Angle iron and two squares to align my front end but I think the level will work better.

[@toddeppley]

That's what my grandfather would call Bassackwards steering

[@jimkhana6881]

😂🥸

[@rbdesignsnh]

looking awesome!

[@jerrylewis1118]

I did the same thing in my build not ones but two times. Looking good so far

[@OversteerEngineer]

Haha I laughed so bad when you realized the steering was backwards. Another youtuber that built a gsxr750 buggy did the same thing so don't feel bad lol.

[@nutzy05]

lol I bought plans for a buggy from Badland Buggy and in the plans they had the rack backwards. It even happens to professionals.

[@jimkhana6881]

🤣🤣🤣

[@brodjohn5993]

Amazing so soft to turn

[@hankburton2043]

At least you got it😉

[@carlosellie7481]

Yeah!

[@XSMotorWorks]

Nice Progress.

[@OmarAhmad-gm1uc]

Fantastic!

[@abangbengbeng9466]

Good Job......Bro. 👍👍👍👍👍

[@sandman900rr]

I would consider getting a saturn vue equinox power steering unit i freakin love mine.

[@rompdude]

A good easy way to trim steering is with a laser pen, put it on the hub and shine it on the wall infront, also down the centre line of the car.

[@bentonmiller9802]

Hell yeah

[@maquinascaseira2463]

🇧🇷Show de bola parceiro 👏👏👏👍

[@DirtGearTv]

I can see you don't have much experience with this sort of build. Taking that into consideration your doing a really nice job so far. Keep it up. If we lived little closer Id come build some projects with you!

[@jimkhana6881]

Awh man that hurts me! Jk...kinda 😅 Thanks though brotha! You could help out via messages still🙏

[@DirtGearTv]

@@jimkhana6881 Trust me it’s a complement! Since you said you didn’t have fab or weld experience it’s going really well so far. I seem to be that guy who’s always helping you tubers get their projects working right 😂 So anything you get stuck with holla at me and keep up the good work man!

[@jimkhana6881]

@@DirtGearTv i gotcha! I appreciate you and I will. But if you see any Fuckery, let me know please lol.

[@witosarlaw]

Mantap bang.. saya juga lagi bikin mini buggy...😊🙏🙏🙏

[@reiserchris2258]

Much better dude 😏

[@Galinhasecia]

Top! 👍🏻😎😎

[@garageguy5174]

This thing is turning out to be insane!! Dose the streering shaft have to solid or just tube? Lights? Great vids!!

[@jimkhana6881]

Its tube but with this small of a diameter I believe it should be solid. Or thick wall tube. Its what I had laying around, and I will do it right on the production buggy

[@paliyatorigor]

SUPER!!!

[@rogertalley7944]

Heck I've always aligned my own vehicles with a framing square. I've never been to an alignment shop.

[@siyaindagulag.]

Backwards rack. Leave it right there man . I did. It switched on the crazy gene. Haaashahaha.🤣

[@bahri1788]

U used cnc laser bro😂👍👍Top

[@user-pe5up2gk5s]

สวยมากครับ👍

[@la_plata3588]

Started rushing my motor mount lifts and burned up my eyes welding last night

[@jimkhana6881]

Did that a few weeks ago. I ended up goung to a 13 shade with a headlamp aince ive been welding so much and it works great

[@la_plata3588]

I have mine set to 13 but its harbor freight junk wife wont let me spend stimulus on the internet and weld shop wants my arm and leg for a new bucket

[@pink_love_cat4928]

I was just thinking about this while in progress of building my kart if the Rack is turning the wheels right while the steeringwheel is turning counterclockwise put the rack on upsidedown and that solves the problem. rack gear on top counterclockwise turn right side pushes out rack gear on bottom it pushes out left. My brain was "SMOKING" on that one

[@jimkhana6881]

Hahahah i never even put that much thought into it...just kinda sent it 🤣

[@BiztoryTime]

Just found your Channel and Instantly subscribed!! What a great video and love the way you document the process!! Do you happen to have the plan drawings of this kart Or a link to where I can buy them? Or did you draw it yourself?

[@johnbarbosa5803]

Nice one 👋👋

[@bigpermsgarage6290]

Cool build! that reverse steering could have been cool.

[@extremeoffroad-snowmountai9084]

👍👍👍👍👍

[@j.walker3498]

Framing squares and level got you a new subscriber. oh no! you cut out the rack mount and didn't change the angle, loose the extra universal.

[@curtism7203]

soo sweet, How come you didn`t correct the angle of the rack while you were at it?

[@jimkhana6881]

Im just that guy lol

[@curtism7203]

@@jimkhana6881 Don`t be that guy! you have the talent and tools to easily correct it, It will haunt you with its jankyishness if you dont!!!

[@jimkhana6881]

@@curtism7203 I feel ya but this is just a prototype. I'm already moving passed it in my head

[@lukemears9171]

So you said the rack needed angled, cut it out, then put it back flat again?

[@witosarlaw]

Mantap bang

[@zidanofficial6018]

Wow

[@elielsonrodrigues7832]

Ficou muito top sio!

[@serhiyolter2911]

👍

[@user-dr4lq5xm7h]

Woooow, está muy bien el proyecto de crosskart.. Dónde conseguiste los planos ???

[@tyronvangreunen]

My mate built a barracuda and designed and builds his own LSDs for them, few guys in Australia have purchased for theirs. Could work in yours too if interested.

[@jimkhana6881]

Is it David cheeks design? He did one...good looking unit

[@tyronvangreunen]

@@jimkhana6881 yip it’s David

[@Hermanimace]

Ackermann can also be changed by the position of the steering quickener. Dont do anything about it (reverse steering), it happened to me for the first time. 😂

[@urucan835]

Nice 👌

[@MushFPV]

What wheel hubs are you using for the front and the back?

[@ChinenovSamodelki]

The one who does nothing is not mistaken. Do you have a video where you can watch about your plasma table?

[@sandman900rr]

I am going to predict rapid wear on your rack.. start budgeting for a heavy duty howe or something.. trust me that is a LOT of throw for such a small rack.. this car is looking sick brother!!

[@jimkhana6881]

Yeah it feels like shit in the gears. The body is cast...I can see it breaking soon

[@randyhertzberg7549]

What steering rack did you use, and where did you get it ?

[@homiegonsi1556]

Wow that's nice 🤑 💰💰💰 make lot's n sell .

[@idollidoy3716]

Slam kenal dri ngri ku tr cinta.. 🇮🇩 Keren bos

[@normankukukjr2008]

why didn't you angle the rack after you had cut the mount?

[@UHO221]

👍👍👍👍🙏❤️

[@wateskajen4563]

Mantap... Indonesia... By las wates

[@EngineeredToDesign]

Hi do you find your plasma cnc? I have just bought the plans for one

[@wildnuts6197]

What size tubing is used for the frame?

[@brodjohn5993]

May I know where can I buy that steering Rack & pinion gear?

[@alexcastro7809]

Hola , que gran proyecto , me gustaria hacer uno igual , tendras los planos que me puedas pasar si se puede porfavor , gracias

[@ramamonjisoafinn7639]

What engine did u used please?

[@asg936]

Where can i find this steering gear? Good work btw.👌

[@jimkhana6881]

Google 14" end load rack

[@Kenny-u1b]

Did you ever do plans for this build?

[@franciscowashington2155]

Beleza 👍👍😎

[@naiquetonge4315]

What are the pipe size?

[@soledadmondaqui7349]

😎😎😎😎😎😎😎😎😎😎

[@daltonhayes3694]

You should sell these as a kit all who ever has to do when they buy it is get a motor and weld the kit together

[@GSPvlogs]

Like

[@autoboss2]

Hi you need to phase your steering joints otherwise they will quick slow quick slow as you turn . also when you turned your steering rack why not angle it then ? other than that good build love watching from the lockdown UK

[@jimkhana6881]

what does phase mean?

[@autoboss2]

if i remember correctly each steering knuckle has to be 90 deg turned in respect to each other . try some of the locost 7 sites they are pretty good at these things

[@carlosenriquehornacampos902]

O unos de planos

[@MarlonRivera-ii9hr]

Buen proyecto el balor de los planos porfa

[@chaddennis1656]

Hey bro do you make the fream and sell i would want 2 of them

[@jimkhana6881]

I've got one right now. Hmu insta _jimkhana

[@carlosenriquehornacampos902]

Hola soy de Peru, me gustaría me ayudaras a construir un goo Katr así, como podría hacer

[@xannyanthonymoisesaraujofi2835]

Hello friend, excellent video, I really liked it, I wanted to know if you could give me the measurements of the vehicle or maybe you could tell me in which page I could get them, it would be very helpful friend

[@user-pf8tb9fu8x]

Why dont you make ariel nomad

[@jawnjacob7573]

Wait. Why didn't you just remount the rack? EDIT: Okay, now I see whatsup LOL EDIT: WAIT!!! You had to remove it to flip it. Why didn't you angle it??? I'm so confused

[@jimkhana6881]

I was just being lazy lol. Didn't wanna have to figure out the coping angles for the rack mount ends if I angled it 😅

[@jawnjacob7573]

@@jimkhana6881 😂

[@jasonp4157]

What happened to the channel

[@franciscoalvarado3314]

Hola Moni soy ecuatoriana y yo quisiera ser ese Buki sino que si tú me pudieras ayudar con los planos a ver si que yo lo puedo de las planas soy ecuatoriana soy un gran seguidor tuyo

[@ezequielpedrosograeff3731]

Tem como vc mandar a medida.ou tipo um projeto

[@curtisnewton895]

looks like rather b welding trike front

[@jeffdughman9741]

too heavy

[@user-bp2oz8ks4f]

বাইয়া এই গাড়ি টি আমি কিন্তে চাই কতও হবে একটু বলবেন বাইয়া

[@daviddetman5575]

Two joints in the steering is much safer in a front collision, it will allow the shaft to collapse rather than stab you in the chest! When realizing the rack was in backwards why didn’t you angle it and take some of the stress out of the U joints? I would also figure out why the front tires aren’t turning equally and fix that otherwise I think you will be changing tires sooner than you want to.

[@jimkhana6881]

The steering is an Ackerman setup so one wheel is supposed to turn more than the other. And I've been getting a lot of that question! Lol

[@johndacres6080]

Right now me would love if you could build me 1

[@SEPU03]

LOL

[@TMeQQ]

dont show the finished product first... first the build then the outcome! (this made me skip forward on the video)

[@nikolaurevic6818]

8

[@jameskolby3335]

Very happy 😍💋 💝💖♥️❤️

[@williamsouth6345]

You got any blueprints for what

[@williamsouth6345]

I don't suppose there's any chance of me talking to them blueprints is there

[@oisongnongnghiepvlog2691]

👍