Mantap bang... saya juga lagi bikin cross kart..😁👍🙏
@orestsvilsons32057 жыл бұрын
How much did this crosskart build cost to you?
@J1I9M7M4Y8 жыл бұрын
Love the brake and clutch solution!
@CMBProjects3 жыл бұрын
Nice build!! You would like to see my homemade 1/5 49cc RC Car!!
@Customwinder18 жыл бұрын
Nice work mate. Bet she's fun to drive.
@anthonystamper33554 жыл бұрын
Nice work. That’s cool
@greaselover32487 жыл бұрын
3 months! wow very impressive. did u work on this full time?
@MrLlumpy19689 жыл бұрын
where can i purchase plans and blueprints to build one
@luvstruck27337 жыл бұрын
Ezeplans in Australia have been building and working out all the bugs in these karts, so you don;t have to. If you really want one, build it.
@MyLonewolf257 жыл бұрын
Luvstruck link?
@StanceTheoryBro7 жыл бұрын
in 4 info
@alexandercolon49407 жыл бұрын
Do you have a website too show the design. I have a friend helping me build one but i need a design
@nichterreichbar7878 жыл бұрын
Very awesome work
@zancepar24255 жыл бұрын
Hello, can you tell me how long is front and rear shocks, how long is drive shafts(half axsles) and how long is frame(body of buggy). Thanks :)
@HTL5 жыл бұрын
Hi! Length of driveshaft is 508mm and lenght of frame is 2700mm. I don't remember length of the shocks
@zancepar24255 жыл бұрын
HTL thanks, can you tell me width of frame? Thanks.
@HTL5 жыл бұрын
@@zancepar2425 Width of the frame is 850mm and height of the frame is 1050mm
@zancepar24255 жыл бұрын
HTL thanks for informations....probably i will make similar buggy but I am thinking about 4x4....i will see...
@Matt-op7km7 жыл бұрын
What shocks did you use?
@jeannin97187 жыл бұрын
nice job! how many Hp is it? and cc? thanks!
@halililkman44777 жыл бұрын
how can ı buy the plans? ı want to build one but ı dont know how can ı get the plans of the body .. any one helping me? whats the parts ı should buy and stuff? any one?
@HTL7 жыл бұрын
Hi! theedgeproducts.com/collections/the-barracuda
@paulstiller425 жыл бұрын
Hello do you have a project plan because i will build own buggy ?😬
@HTL5 жыл бұрын
Hi! I don't have any plans. My buggy is my own version of Barracuda buggy. You can buy plans from theedgeproducts.com/
@peteaddis15485 жыл бұрын
It would be nice if the pictures rolled over slower, I'm really into this stuff but didn't get a real opportunity to look at it!...
@lizzbien44463 жыл бұрын
Play the video at 0.25 speed. 👍
@ladislavcvach62567 жыл бұрын
do you have a plan for the frame please?
@lucagolinucci51517 жыл бұрын
Hello! can you tell me which company is steering gear ?!
@HTL7 жыл бұрын
Hi! NEXGEN OFF-ROAD rack and pinion
@novanhidayat9775 жыл бұрын
waw that awsome. cn u give me dimension rollcage this vehicle?
@furiousgeorge63047 жыл бұрын
You made a comment on a company that has made plans for cross carts, you have that link?
@HTL7 жыл бұрын
theedgeproducts.com/
@troycrowder99425 жыл бұрын
very very nice
@jaritiilikainen14046 жыл бұрын
Komian pelin väsäsit. Onko jossain suunnitlemia?
@HTL6 жыл бұрын
+Jari Tiilikainen Ei löydy suunnitelmia. Mallia otettu Barracuda buggy:sta ja tästä sovellettu oma versio. Paljon löytyy kuvia googlesta kun hakee barracuda buggy nimellä
@hognoseharbingers41405 жыл бұрын
I like it, I like it alot
@antonnpn90639 жыл бұрын
You are a genius- With to much time:)
@paulobaldivisso13755 жыл бұрын
Those shock absorbers of which vehicle are
@HTL5 жыл бұрын
The front shock are from Polaris Predator 500 and the rear shocks are Gaz GP for rally car
@pedroekeilla7 жыл бұрын
too beautiful, congratulations
@saariantti1238 жыл бұрын
how much time did you spend on this crosskart?
@HTL8 жыл бұрын
About 120hour
@Hunter-ee7fj8 жыл бұрын
HTL ??
@CountryBoy10695 жыл бұрын
What kind of shocks are you using on the rear of your buggy?
@HTL5 жыл бұрын
Hi! I use Polaris Predator 500 atv front shocks
@CountryBoy10695 жыл бұрын
@@HTL I'm so Sorry. Are you saying the Blue shocks are Polaris Predator 500 shocks and not the Orange ones? Because every time I try to look them up. It pulls up the small shocks like the Orange ones. I'm needing the Blue one. Sorry if I just confused you lol
@HTL5 жыл бұрын
@@CountryBoy1069 Sorry my fault. Rear shocks are GAZ Gp6 2069-14 uniball Bda and Springs 350mm/20KG/57 mm
@CountryBoy10695 жыл бұрын
@@HTL Sorry brother but GAZ Gp6 2069-14 uniball Bda and Springs 350mm/20KG/57 mm sounds all Greek to me. LOL Where did you buy them from or what are they off of. I can't find them here on the internet.
Could I get the plans or blueprints to build that from you?
@HTL7 жыл бұрын
Hi! I don't have plans or blueprints, this buggy is my version of barracuda. I have searched pictures via google and made my own version by using those pictures as an example
@orestsvilsons32057 жыл бұрын
I am planing to make barracuda buggy too and i am making plans by watching videos, pictures and drawing out plans for the parts i need, so i dont need to buy expensive plans.
@texaselite13556 жыл бұрын
Orests Vilsons they're like 40 bucks right now
@christainhinterleitner72997 жыл бұрын
was für ein motor ist das
@pizzplnet82043 жыл бұрын
All of the buggies.
@elcreador66755 жыл бұрын
Excelente 🇩🇴🇩🇴🌎
@sebsonexrexflex8 жыл бұрын
what this is type metal tube? and please dimension
@HTL8 жыл бұрын
Tube s235 26.9x2.6
@coen83238 жыл бұрын
mm?
@mr.scorpion86468 жыл бұрын
No swaybars??
@HTL8 жыл бұрын
i think maybe i don't need swaybars
@mr.scorpion86468 жыл бұрын
Don't you think the handling would be even better with swaybars?
@HTL8 жыл бұрын
Mr.Scorpion i don't. My first crosskart have a swaybars and i don't like, because swaybars on my way when i go to cabinet
@luvstruck27338 жыл бұрын
Go to cabinet? Toolbox? To work on the car?
@HTL8 жыл бұрын
Sorry about my english. What I did mean was that I did not build sway bars because it is easier to go in to the buggy when there is no swaybars. In the other words the access to the cabinet is easier without the swaybars on your way.
@Hunter-ee7fj8 жыл бұрын
where can i get the work plans?
@Hunter-ee7fj8 жыл бұрын
HTL
@HTL8 жыл бұрын
This is my version of barracuda buggy, i dont have any blueprints
@MrEnroh7 жыл бұрын
Hunter google "the edge products buggys"
@SikSwanger5 жыл бұрын
This isn’t a cross kart it is a barracuda!
@eslamebrahim35037 жыл бұрын
nice
@marnixbos83607 жыл бұрын
Can you send some blueprints?
@joegermaine42085 жыл бұрын
Could someone send me plans for the piranha buggy
@HTL5 жыл бұрын
Hi! I have not any plans to buggy
@halililkman44776 жыл бұрын
can you sell frame?
@HTL6 жыл бұрын
Halil Ilkman I don't have enough time to make frame to sale
@roboknezik12904 жыл бұрын
please what is it in 1:37 ?
@SikSwanger3 жыл бұрын
It is a weld in spline.
@greaselover32487 жыл бұрын
one of these things would smoke a rzr
@asapmystic56467 жыл бұрын
GREASElover32 depends on engine
@dasonstalnaker97646 жыл бұрын
But this specific one would yes
@carguy4668 жыл бұрын
Nice. Paljo makso mettallit ja valmiit osat
@tipparieku8 жыл бұрын
+Car Guy Alatko rakentaa?
@carguy4668 жыл бұрын
tipparieku ajatuksissa ois
@ylivakeri32976 жыл бұрын
Mikä moottori toi on?
@HTL6 жыл бұрын
CBR1000
@axelmontellano83487 жыл бұрын
no saben que motor usa
@texaselite13556 жыл бұрын
Axel Montellano honda cbr1000
@gaskan6668 жыл бұрын
can u build me 1 in red please
@hakanayvaz7643 жыл бұрын
Plans
@Juho_tapio9 жыл бұрын
komia peli
@davidnixon36346 жыл бұрын
Hey I’m really wanting to build one of these is like to talk with u about some of the process if u have time I’ll send u my email