Crown Vic P71 Swapped Mustang GT (What's The Difference?)

[@OverDriveMed]

Chicken sticks?

[@aspieotaku3580]

No difference just intake on other side. P71 is basically a heavy mustang gt 4.6 with 4 doors.

[@P71ScrewHead]

Ppl, get a NPI block n put your PI top end on it, best way to go about it if you don't want to build it but want more power via higher compression..

[@tjhessmon4327]

I have to laugh at these fellas, who grab a junkyard engine, toss it in their vehicle, add a bolt on supercharger to it and assume everything is going to be OK... production cars with atmospheric aspirated engines, are not designed to handle the extremes of pressure and temperature found with forced pressurized engines. The latter requires different piston metallurgy, very different piston rings, different valves and valve seats, as a bare minimum. This is not to mention gasket requirements, in order to handle the extremes of pressure and heat. So.... Can you use a Crown Vic engine 4.6L in your GT Mustang .... the answer is Yes/If... yes/If your simply swapping one atmospheric aspirated engine for another, although you may find the cam profiles to be different as the crown vic is focused more upon torque that high RPM HP .... However, if your looking to force pressurize the engine, then you need to consider modifying internal components in order the handle the extremes of forced pressurization, else eventually, the atmospheric aspirated components will fail.

[@garypanichella441]

Thanks for videos man great content and the new edge is bad ass homie

[@hotrodlincoln7186]

What are your thoughts on having a 2015 Shelby 350gt swap in a 06 town car?

[@tunesquad7744]

Great looking mustang bro I might do the swap on my v6 mustang when the engine blows up

[@garymcnemar6620]

That car sounds vicious!

[@lawrencereyos930]

Deep frying chicken nuggets and tater tots while enjoy this video love the Stang 🐎💯🔥😎👍👊🫠

[@OverDriveMed]

Making me hungry over here🥴

[@RodknockRhett]

Then there’s me with my non PI Lincoln Town Car with 238k on it.

[@frankelliott6552]

Lol I had the same thing to mines I got a grand Marquis out of a 05 and had a guy put it in I didn't it would work until the junkyard told me and the crown Vic engines are cheaper

[@bobbywren123]

Thinking about doing this myself

[@alfenner3309]

I’m looking at buying a built 98 crown Vic engine and put it in my 01. It is a cobra clone engine now (4v) all forged. I’m a bit worried this won’t fit or workout in my 01. I’m getting the built trans with it as well. Not that that matters much. Your thoughts on what I may need to put this together ? Thanks.

[@rynosraceroom66]

Will the crown vic motor fit in a 2000 Expedition you think ?

[@85jsv]

What was your bucking issue?

[@04oxfordwhite81]

What happened to the cobra spoiler?

[@OverDriveMed]

In the process of repainting it

[@TurboTurdBurglar]

Man you need to get back to doing some reaper content soon. Hope all is good

[@bruh2858]

I love driving my new edge but it shakes so much that is scares me ☠️

[@NewEdgeDesigns]

It shakes?? On the highway or at low speed too??

[@OverDriveMed]

Uhhhh may wanna look into that

[@bryantaylor7411]

Im looking to buy a 2005-2009 Gt Manual. When is the best time to get one

[@jessejames5169]

I just had my engine replaced but I think my water pump is going out cause I have slow drops of coolant coming from the middle of the front of the engine so I think my water pump is bad so what water pump do I ask for? Thank you for your time

[@austinboggess3154]

What value covers did you put on yours? If you're was a 2000 mustang i thought they had more bolts

[@Nebula-rx7bj]

is the supercharger on a stock motor?

[@OverDriveMed]

Yes

[@NX4.6GT315]

Imma heat up some toaster strudels.....

[@OverDriveMed]

Dude they hit

[@ThaSilentOne420]

1200$ wow . 4.6s are worth 300-500$ at most ffs unless its a 4v 4.6

[@OverDriveMed]

I bought one before that for $500 and the rods were bent🙃 saw this one with the low miles I couldn’t pass on it

[@bobbywren123]

Drive by Wire?

[@garymcnemar6620]

Pepperoni Rolls!!!

[@jeffreystelling3395]

Sounds mean

[@xCharted]

Super Mario Dude Guy Hi

[@ericbrasher9610]

Patato

[@kennyanderson1414]

Potato

[@ssgnatch9989]

First lol

[@raymundonunez9485]

I thought the mustang gts 4.6 is a 3 or 4v and the crown vic has 2v so you are loosing power

[@raymundonunez9485]

Nvm turns out there was 2v version of it did u notice any difference on the 3v from the explorer?