Crown Victoria Clunking Front End? - Sway Bar End Links Replacement

In this video I will show you how to replace your stabilizer bar end links on your 1992-2002 Ford Crown Vic or Mercury Grand Marquis. This also applies to the Lincoln Town Car. I will list the parts I used below. I also replaced the front brake pads and rotors while I had the wheels off. I highly recommend the Powerstop coated rotors and ceramic pads. This is obviously optional if your brakes are in good condition.
Amazon Paid Links
AC Delco Links (Need 2) amzn.to/3dFfoNS
Powerstop Evolution Front Brake Kit amzn.to/37eearp

[@mastermecanic4121]

Youre a lifesaver man!! Thank you so much for showing us what you were doing. So many videos skip to after things are done. This helped so much!!!

[@oldcarnocar]

on my 98 p73,the end links grease zerks were plugged, i changed them,now i can get grease in! on super tight u-turns something squeaks on my cv. a-arm bushes are good. no slop in the steering. nice video,subscribed!

[@Kuessemir]

Awesome!! Thanks so much for the clear and succinct video. My 06 has a bad link. When it warms up I'll be replacing it and the brakes too. Couldn't do it without your help.

[@Devinsfordwheels]

Great video man mine were just done but my actual sway bar buschings bad just got those to do too

[@randylee1047]

Easy enough! Did all my ball joints. Just clunky links left. Just ordered the same links 13$ on amazon

[@jakethesnake4971]

Did a pickle fork work? If not, how'd you do it?

[@midwestpanther98]

This is the exact problem I'm having. I raised the hood and with my hands I quickly moved the car up and down and imitated the sound it makes on the road which is like a clank sound. Although when I'm driving it sounds worse since I cant get a lot of force

[@jasondavis4479]

Next time Jack up the lower control arm to relieve pressure it will come right

[@americarsqueensland1667]

When buying these Crown Vic, Grand Marquis Suspension parts, by greasable ball joints, tie rods etc, they are a better choice and will last much longer. Just grease them everytime you change the engine oil.

[@JackofAllMasterofNone]

Good advice

[@mikesanto69]

Good job thanks for video

[@carltorjusen558]

with cold weather whenever l go over a bump the noise from front end on one side goes klunk and over several bumps its klunk tee klunk klunk. on warmer days not noticeable. would u suspect it to be front end link.??

[@JackofAllMasterofNone]

Most likely yes. The grease gets hard when it's cold, which makes the problem more evident.

[@carltorjusen558]

@@JackofAllMasterofNone thank u 4 reply. l have a 2004 focus and 2 times l have had to replace the pair. 1st @ 30,000 miles and 2nd @60K bout 2-3 years ago. car has close to 70k miles. going to order a pair in addition to other parts. as parts get hard to get after 20 years of auto.

[@carltorjusen558]

replaced one side. no clunking going over bumps. great..!!! also l notice that l have less play while driving with steering. l use to have to correct a lot of times on driving. have slight wheel play but not as bad as before. guess l should replace the other side and hope to have almost zero wheel correction on drive. Took 3 hours from start to wheel installation. not bad for a 75 year old man. guess the car will outlive. Great video and thanks

[@JackofAllMasterofNone]

@@carltorjusen558 Excellent. Yes. I would definitely do the other side too. I'm sure it's bad also.

[@jonhampton1087]

I have 01 grand Marquis when driving hit a dip in road it is scary. It’s like the passenger side pulls against the driver . Could that be the sway bar bushings?

[@JackofAllMasterofNone]

Doubt it.

[@rxmarlo2303]

What if my top one is bolted on just the bottom nut came off how do i get it to line up with the swaybar hole? Pls help i will be working on today

[@JackofAllMasterofNone]

Pull it into place. It can help to jack up one side or the other to relieve pressure on the sway bar.

[@S3cK5hun8]

Mine sounds like a "kink" sound. Do you think this could be the issue?

[@JackofAllMasterofNone]

Not sure. Many thinks can make a sound

[@smokeshop1060]

Same Here. My sway bar makes a loud Rattle

[@neroviggs5467]

Mines doing it now I drive it to work gotta get it fixed asap

[@dr.magneto5341]

What is that squeaking nose that's what I'm hearing in a2002 and it's mostly bumps and steering l/r

[@bjccq2924]

Lower ball joint my man. Get it before you’re front end drops. Dealt with it a month ago with my 96. Structurally the same I believe

[@a.kblur04]

I've been told it's actually sway bar links. I bought some, gonna fix it when they come in. Sounds like a bad mattress lol

[@ogloc6308]

probably balljoint. It can get pretty dangerous to drive with a failing ball joint. The suspension can collapse and cause you to crash

[@ryan-qp3hw]

could be front shocks, Lower ball joint, or sway bar link. ive dealt with all 3 sadly but she rides just like new after completely refreshing all the suspension with new!