CROWN VICTORIA FUEL PUMP REPLACEMENT THE EASY WAY

Рет қаралды 21,202

Smoked-Out Garage

Күн бұрын

Пікірлер: 41

@russellgilbert3453 2 ай бұрын

I always like the part when you start it up and it RUNS! 😄

@FMChimera 5 ай бұрын

On Vics, Marquis and Town Cars once you disconnect the exhaust hangar throw a ratchet strap around it and winch the pipe over to the side. Gets it entirely out of the way.

@barovelli 9 ай бұрын

Nice workspace. The carpet ties the whole driveway together.

@smoked-outgarage3261 8 ай бұрын

😂thank you

@1nfowars 7 ай бұрын

Between this and another video, it helped me. Thank you

@smoked-outgarage3261 5 ай бұрын

Glad it helped!

@bbminetesting6837 8 ай бұрын

How empty should the gas tank be to avoid fuel dumping out when you remove the pump?

@thomasgarrett2510 2 ай бұрын

Howdy, I just went to start my 03 vic and I don’t hear the fuel pump. It turns over nice but not even a fart out of it. Fuses and relays are ok and so I’m thinking it’s gotta be a bad pump or the connection back there. What color were your fuel pump wires?

@That-mf-chris 2 ай бұрын

Just got a 06 crown Vic and she died on the way home of fucking around she will turn over but won’t start I’m assuming it’s the fuel pump atleast your not the only one in this boat

@assssss3661 Ай бұрын

@@That-mf-chris mine runs but runs like total shit and reading fuel pressure codes? fuel pump?

@JoJo-209- Ай бұрын

Yeah wtf I have a 03 cvpi and it started a few days ago completely fine, then the next day cranks and cranks, fuel gauge said it had some gas but I knocked on the tank and was bone dry. I filled it up and no issues for the day. Then today it's just cranking again no start... When I turn the key the first time, I'll hear the fuel pump kinda wine then it'll almost start but die and then just crank. Then when turning the key back and forth again the fuel pump no longer makes a wine noise. You guys have any suggestions? Relay maybe? Fuel pump trash?

@cdbfullbore Ай бұрын

Excellent Video my dude! Love It!

@MoHanStryngslayer 7 ай бұрын

Thanx. Everyone else just cut that top wire in their vids.

@Joe-nk5kt 2 ай бұрын

how hard is this to do with a almost full tank??

@EricDeal-sl1je 5 ай бұрын

You did a fine job bro.

@grabberblue245 3 ай бұрын

Gotta say, great video. I’m 99% done… that very last connector will not snap it. I’m just stuck at this point! Also; I had my truck next to the car and hooked a ratchet strap to the exhaust to pull it out of the way. That works very well.

@ethandworzecki5034 3 ай бұрын

I have open headers so it’s really gonna be easy for me lmao

@nick0164 2 ай бұрын

@@ethandworzecki5034open headers is wild😂😂your neighbors probably adore you

@powertoyz 6 күн бұрын

Great vid, works on aerobody crown vics too!

@the1vampfire284 18 күн бұрын

Little tip for that one connector youcan use a 7/32 Allen key wedge it in pull left first then right then pop connector with a flat tip was super easy!

@santyago1819 6 ай бұрын

absolutely love you disconnected the fuel line ez as pie

@SuperRandomtom 9 ай бұрын

Man thang is crusty. This oregon boy is not used to seeing that. 😅 Great video and information though😊

@smoked-outgarage3261 8 ай бұрын

Lol, thank you!

@infinity3jif 8 ай бұрын

This Georgia boy isn't used to seeing that either. I feel for you guys in the Rust Belt.

@rickytoombs6561 9 ай бұрын

One wire plug doesn't come out as easy. It gets caught between the brace and fuel take. So how to you get it loose without cutting it?

@smoked-outgarage3261 8 ай бұрын

It was pretty tight for me too but I was able to find a spot to sneak it through.

@rickytoombs6561 8 ай бұрын

Good to hear. Thanks.@@smoked-outgarage3261

@justincollett3062 6 ай бұрын

I was able to stick a straight pick between the connections and manipulate it loose.

@justincollett3062 6 ай бұрын

Did you or anyone else complete this repair and the fuel gauge not work? I can hook all the electrical connection up outside of the tank and see that the float arm changes the gauge, but when I install it in the tank, it’s below empty.