Giving This Car a HUGE Facelift - DIY Lights, Custom Bumper, Widebody Porsche - 928 Ep. 29

[@GoPotato69]

dont mess with the mans beans!

[@CrucibleCoachworks]

Tony agrees.

[@PrivateUsername]

Favorite tool in the box is my set of precision screwdrivers and pliers. Comes in handy working on small things.

[@alphaboltz]

Favorite tool is the free pocket screwdriver from the tool trucks, I use them for everything, pocket prybar for small stuff!

[@keithboudreau3555]

My favorite tool is my Railcore 3d printer. Makes mocking stuff up much easier.

[@myurcek05]

My favorite tool in my tool box has to be my welding helmet… My favorite tool overall is my welder… My wife (who says flit I win these blocks will be stealing them for her tool box) recently learned about my 20v angle grinder. That’s her favorite tool.

[@danield9605]

My favorite tool is my hammer, when all else fails I go for the hammer. 😂

[@davidhalgash2571]

Might have to get me one of them Dustless Sanding Blocks! 🤔

[@4486igi]

Consider Mirka sandingblock and Abranet.

[@ferrariguy8278]

I think my favorite tool in my "tool box" is my computer. Because I can watch Crucible Coachworks vids with it and learn something! Seriously though I cherish my Granddads and dad's tools - though I can't point to a specific one. Maybe the hammers.....

[@45BradB]

My favorite tool in my toolbox is my mallet. It’s a multitasker because not only is it a tool, it’s also stress relief …which I need …frequently.

[@greenkouki]

get your LED strips from the retrofit source. The profile performance switchback strips are extra bright! I used them in some NSX turn signal lights recently

[@karimhuerta597]

My favorite tool is the blue dye paint you use to scribe the metal and cut it so it can be ready for welding

[@geargrinder7714]

My favorite tool is the one that knows when it's needed and doesn't run away when I go to get it

[@thomperkins]

My favorite tool in my box is my Snap On 1/4” impact and screwdriver. They’ve both saved me so much time with tear down and assembly.

[@59eurobug]

I do a lot of custom interior panels, so my favorite tool is my contour gauge. Found you guys while looking for ideas for my own 928, great content! Thanks

[@faisalalbayaty6729]

Hi can see you work thank you

[@danielerikskold]

Aaaarghh!! You are insane pouring the catalyst over the bowl like that!

[@1cstabach]

My favorite tool that I always use is my Snap On screwdriver.

[@_nader.essa_]

This channel is underrated tbh

[@bigdadgigachad3042]

So cool

[@MrRedkid91]

favorite tool in my tool box is my collection of 10mm sockets. At one point in life, I'd always have the 10mm would always be missing but now I have a whole drawer full of them

[@pokeysplace]

My favorite tool is my McDonald's Crew Person of the Month award spatula (early 1980s). I've used it to scrap gaskets, make shift screw driver, mini pry bar. I was looking for it this morning to pry up a piece of door molding.

[@CrucibleCoachworks]

Congrats Pokeysplace! You were randomly selected to win the Eastwood sanding blocks! Can your shoot your shipping info over to “[e-mail]”?

[@1IntenseBiker]

My favorite tool is the new Radius Check Gauge I learned about from your 356 video.

[@kenmikrut6490]

My favorite tool is my 3d printer, this way I know when I design something it is going to work

[@jacobkirkpatrick1791]

My favorite tool would have to be my Hakko FX888 soldering iron. Love that thing!

[@aarondennis4561]

Lights are looking sick! Obviously your brain is the most important tool in the shop bc if used appropriately any tool can do multiple things. But a less cheesy favorite tool answer would be my the new Knipex pliers wrench set.

[@thesuburbanidiotsgarage2572]

My favorite tool used to be my 10mm socket but it’s been missing for about 5 yrs. New favorite tool is quickly becoming the 3D printer.

[@travismerrix4391]

My favorite tool in my box is my 3/8 battery powered ratchet from snapon just makes life a million times easier

[@CodyTolman]

Milwaukee tools in my box are by far my faves.

[@smavtmb2196]

That's going to be possibly the best looking porsche 928 on the planet. Is the engine stock? Getting Upgrades?

[@flintlock_glockTJR]

I was gonna say the Chevy Bowtie thing, and then he said it. Crisis averted 😅

[@erickreyes8339]

Dang my favorite tool.. my 1/4 snap on narrow space electrician wrench.. this has saved my life multiple times😅

[@AutoRevLife]

For the turn signal, get a clear filament in either ABS or polycarbonate. Then paint that with a clear paint or whatever color you desire and coat it with 1k clear coat

[@gregroot198519]

My 1/4' drive Dewalt torque driver is my favorite. Gets almost daily use, for all sorts of projects

[@paulk2959]

My favorite tools - TIG welder and my Harbor Freight RA 2" DA sander. The sander sounds terrible but it just keeps working.

[@nicolelongneckergallery]

Cast your lens with acrylic. 3d print the lens, detail to fine gloss, pour a silicone mold over it for inside and out. pour cast with acrylic.

[@markericburke5303]

Can't wait to see this one done awesome job 😊

[@CrucibleCoachworks]

Thank you!

[@aaronburratwood.6957]

My favorite tool is a hammer. I have an array of hammers for everything from home demolition hammers to finishing hammers. Deadblow, brass, nylon, mini-sledge, splitter, rubber, ball peen, and on and on. I have a body hammer and dolly set I got while back too. 🔨 HAMMERS‼️

[@aaronburratwood.6957]

You’re Porsche guys but everything you’re doing totally translates to every other car. This is like taking online classes. I’d love to make my own custom nose for my project & I think I can do it after watching y’all. Not as high tech as you but I’m just a shade tree mechanic.

[@jebidiahcarlyon3543]

My favorite tool from my toolbox is probably a table vice. It's not glamorous, but it is extremely versatile.

[@deeiks12]

Amazing job. The light looks already great. I didn't see the chevy logo either but now can't unsee.

[@daniellindsay6443]

My favorite tools are the BFH and a power probe. No 2 tools have an equal amount of the ability to repair and destroy at the same time.

[@CrucibleCoachworks]

This is poetic.

[@HomeGrown9999]

By far my electric ratchets. Such a time saver.

[@GrindhousePerformance]

Cool as hell guys, this is great. 👍

[@SpeedyDad1]

My favorite tools for restoring my classic Mini are my Knu Vise P-401 welding clamps. Amazing things for holding panels together.

[@frekil4]

Should try to make all the lights look like the futuristic 80s lights kinda like the hyundai ionic5’s taillights

[@kaiserhansen7480]

plain old screwdriver is my favorite tool

[@johnbarker5009]

Great video, I like how those lights are coming together. My favorite tool in the shop has GOT to be my air compressor. Even if you have a whole rack of battery powered tools, there are some things you can't do properly without compressed air...and air tools are nearly always less expensive than cordless...once you have the compressor.

[@justinuzzanti361]

id have to say its my arc captain mig 200 welder!

[@brianerdner4628]

My favorite tool is Milwaukee m12 3/8 stubby impact.

[@mattyb7607]

I love this build but PLEASE start over on these lights. I don't know what you have planned for the headlights but you can incorporate turn signals and DRLS into the headlights and leave this giant red headed stepchild in the garbage pail. Look into diode dynamics and profile pivot.....I would not start on these lights until you have all the lights figured out. That way they can be cohesive and not an afterthought. Keep up the good metal work!

[@makalu69]

I SO want to see how this car turns out.... but I'm over 50 and I'm just worried I might not live that long :(

[@brickcity9mm896]

Stop crying like you're 54😂

[@1995naSTA]

My favorite tool is an m12 electric ratchet wrench.

[@EternalGamingNet]

Really enjoyed the design process for the light/light housing. Very interesting video as always.

[@nmakris2004]

My wire terminal tool! I use ti to clean up wiring with out hacking into it....

[@JGV_IX]

My favorite tool is my Festool Rotex sander - it makes the chore of sanding better and dust collection is great! However the 1.5” braided hose is heavy

[@kdoran709]

That bean salad looks like a great time

[@brickcity9mm896]

Roger that😮

[@dovydas.linkus]

Best tool ever: Pliers

[@dwayneattard5265]

instead of the floating island idea for the lights why not try lines, similar to whiskers because it will still look like a bo-tie from a from far away.

[@faisalalbayaty6729]

Good toll where is the dust go do you have vacuum attached to the hose

[@nathanielscholtens2812]

My favorite tool is KZbin tutorials 😂

[@supertedogpriken]

Where did you find them lights?? The "bright as the sun" one. I need one like that to make my street legal(ish) supermoto even more street legal(ish)....

[@JonFukuda]

#grogurt FTW!🎉😂

[@Wohren_Oss]

Where can i get those driving/fog light combos? Those look nice!

[@antonmealy168]

Is there anything stopping you from putting the driving lights at the end of your light-strip, towards the middle of the car? Though I suppose Porsche would have used your location with various messy trims. I've bought similar white-amber LED intending to light up a tinted clear grille bar, ending at a round lenses LED Fog/Driving light.

[@TimotoRacing]

Try to put the headlight on the insight of the lights

[@davidhenson3372]

My favorite tool is usually the new tool..... Lol

[@roaddoglv]

Have Eastwood send you a paint shaker.

[@christoffer1973]

Why not put that fot/drl light towards the middle of the car on the side of the lens instead of in the middle.

[@TECsta76]

Should take them fluorescents put them in a bin then grab that whole bin and put it in a skip!! LED panels...

[@beingabdaal950]

I'm not in USA but my favorite is the 3d printer but I can't design I need help with designing 😢 can you help me or recommend me to someone?

[@bigsluggy]

Widebody restoration?

[@Stoneface_Garage]

Favorite tool...a set of dental picks...( no, not a dentist)

[@drivenimagecustoms6108]

That's a poor design on that block from Eastwood imo, that hose should be on one end of the block so you can position either left or right of it and you don't have a hose sticking out in your face Block looks too rigid and bulky for that particular application (bumper) and the holes look too large on the sand paper = less sand paper = less surface area I'd be sanding the top of that bumper with a long semi rigid block to get it laser straight

[@RichardHeadGaming]

Hot glue is not something you produce parts out of for an automobile, or anything else.

[@andyearl6784]

Call me dumb I’m only a builder, if your going to the trouble of making a plug why not make a mold firstly?

[@larrysorenson4789]

Still looks like an 80’s Porsche nose. Opportunity missed

[@christoffer1973]

What about use it on your hard skin feet 😂😂😊

[@Энди-у1ц]

Фонари, конечно колхоз полнейший

[@tedtalotti332]

Do you know your show would probably be a whole lot better with a lot less joking around and a little bit more serious it’s like listening to it it’s like listening to a couple of kids and it’s annoying

[@panitatangjaitrong299]

ไม่ชอบรายการแนะนำสาระ แต่ถ่ายแต่หน้าคนตลอดนานเกินไป ไม่เห็นสาระดีๆ ควรปรับปรุงรายการ