CRX Hydro transmission Conversion. Which Header ? ,Part 5

[@munkydotorg]

About that tape gun. I have that same scotch brand one at home. Had the same problem at first, I ended up taking it partially apart and fiddling around with it, got it nearly as good as the tape guns I used when I used to work in a warehouse. In fact the biggest difference afterwards was the thickness and rigidity of that clear plastic plate. The pro gun had a thicker plate with less flexibility. But, just fiddling around with it (can’t remember if it was slotted and I could adjust the blade out or if I expanded the holes, might have also roughed up the clear plastic plate so it would grip the tape better) made a world of difference and I could just focus on taping up boxes instead of getting the darn thing to do what I wanted it to do. Thanks for the great Honda content as ALWAYS! Loving the Rex

[@rogerserafin]

Seth has a pretty cool channel here (CRXSeth). As always, another informative video by LHT !

[@LHTPerformance]

Yep. He’ll be the Dragon meet in October 8th if you can make it out.

[@larrypage9201]

Worked in shipping receiving for 6 yrs.. blue Uline tape dispenser!!!

[@BrodeyDoverosx]

Yes!

[@patricebourbonnais]

I remember when i put my crx b20 turbo, the 3 inch downpipe was rubbing on the ground when I was braking at the end of the quarter miles because of the slick not having enough pressure. I had to weld a skid plate so that it will not rub thru the downpipe. Lots of memories on my first car

[@rockytharpjr]

LoL I like u-lines I’m like a ninja with that thing. Of course Matt has a super awesome solution. 👏🏻

[@lesasookdeo7310]

Love the intro

[@xtreamv]

Did I miss what you used to do the full hydro conversion or was this video just to show that you got it working?

[@LHTPerformance]

I think it was in episode 4

[@7eamGhast]

You gotta jerk your wrist to the right or left to get the first initial tooth to start the cut, and then you just follow thru.

[@monter5507]

The tape dispenser with the buttons is the one we use at Amazon works amazing

[@macanoon]

did you have to remove the air duct for the hydro conversion like you do with the Hush kit ?

[@icurt06]

If you'd let Esther handle the marketing and the guys work on the projects LHT would prosper greatly.

[@edvas02271]

Definitely want to make in October.

[@andrewpalma8474]

Loving the shirts I have a collection at the moment so far I have The Black on black S2k, Red Integra & White Crx

[@robertjordan9075]

I’m getting very excited about this car. Thanks buddy.😁😁😁

[@bvward]

john, back in the '70's I used a tape machine with a pull handle that fed , wet, and cut gummed paper tape to length. Uline plastic tape dispenser for your volume looks best.

[@doyoupylon]

❤ my T-shirt. My dad was a mover and can still break packing tape off with his hand. CRX header story. Me & BJ. His CRX. He's driving in the rain in Tampa on Hillsborough and we feel something under the car. Bump. He said, "Ooo, I think I just ran over that turtle with my header. My poor header." 🤣 Yep. It dented. Turtle was fine.

[@Pittsburghborn95]

Thank you guys for the content! Always great seeing it!

[@larrypage9201]

Lol...I'm 30 I've owed my hatchback 92 dx mpfi swap on stock d15. Anyways that sounds so old skool. If it's gonna have an intake we are gonna put a header... If we run stock air box we are gonna run stock header... Vintage talk....

[@makehondagreatagain6357]

You should get the shirts in white or light grey and put the rear end of the CRX on the back.

[@mik3ymomo]

Turn the tape dispenser at a 45degree angle as you want to cut it and it should cut fine.

[@amadafaka]

I have never had one of those tape dispenser to work without me using my hands to cut it.

[@KingAlexander]

Absolutely LOVE the intro!

[@KasperWithA-K]

“George is actually doing a workshop if you want to attend, but by the time you see the video it’s probably gonna be over…” 😂😂😂

[@LHTPerformance]

Lol

[@cats.cars.33]

Them red u-line dispensers are complete trash, the old gray ones are fairly solid though. Those tape machines are awesome though, they work great, the only downside is that the tape feels nasty (like wall paper) and you have to occasionally clean the brushes on them or else they gum up. (I work at a print shop that ships about 5-10,000 packages a day) Also, love my CRX shirt and LHT koozie.

[@natemeanor4247]

Cerakote that header!

[@damonblalark766]

What slave cylinder and line setup is that.

[@1991jdmcivic]

John, look into a mouse trap tape gun , they are the best I've come across.

[@OlManWillard]

I ALWAYS had to run skid plates on any of my headers on my crx’s. Maybe you guys could build a 4-1 that would have better clearance?

[@LHTPerformance]

On this build I’m not trying to make a ton of power. If it does 175whp it will be plenty for this. I really don’t like the look of the header hanging under the car, the CRX always has this look.

[@OlManWillard]

@@LHTPerformance Oh for sure. I just thought the design of a 4-1 would possibly allow for better clearance. Have you tried mocking up an oem itr manifold?

[@Vkandypaint]

That bay cane out great 👍🏽 🙌🏽🙌🏽🔥

[@gbranca777]

is there enough room to mount the oem a/c fan on the motor side of the radiator with the 96spec ITR header & heat shield? ty

[@LHTPerformance]

Oh yea. Lots of room.

[@Patrick94GSR]

I think the tape needs to go in between the black roller and the silver plate in order for the teeth to cut it.

[@chrismoreno922]

What cable speed sensor did you guys use for the crx

[@LHTPerformance]

The speedo drive from the sohc trans.

[@Jasoneiland89]

I bought 20 of those little clips for the speedometer cable from Honda because of its nature 😂

[@LHTPerformance]

Lol. I used to snag them from the junk yard. So many cars used to come in with them missing.

[@excaliburO2]

Griptec LHT pullies for the JRSC H22 kit?

[@LHTPerformance]

These are for the B series Vtec engines.

[@excaliburO2]

@@LHTPerformance well if you ever make them for the H series I am willing to send out my pulleys to you for mock up.

[@LHTPerformance]

@@excaliburO2 ok. I need to make a video and see how many H22 guys would be interested. I remember it being a problem due to those very small diameter pulleys.

[@LCARS359]

give the tape gun a little twist at the end

[@mcef9117]

Great job!

[@CarlosJimenez-el8iw]

How much for hidraulic transmission kit conversion for crx b series?

[@LHTPerformance]

We don’t offer a kit. We build them as needed to the car.

[@salvatorelb1338]

Keep up the good work!

[@jahbrake9791]

Run that 1200$ dollar tape dispenser by Lisa from corporate 🤣 Loving the series so much!

[@LHTPerformance]

Yea, I don’t think we’re on the scale yet. Lol.

[@patricebourbonnais]

that crx will be awesome. keep the good content going

[@rockytharpjr]

John I need you to find me a crx for you to restore. It was my first car.

[@LHTPerformance]

They are kind of hard to find nice ones these days.

[@spoolin2bars]

All you have to do is just hit the tape roll with your other hand. Cuts it perfect without spending $1200 for an electronic tape dispenser.

[@larrypage9201]

Blue Uline tape dispenser

[@oldskool1979]

I want a T shirt. Can you ship to Canada ?

[@LHTPerformance]

You can use myus.com to order. Our software isn’t setup to ship out the USA

[@Hondahotwheels]

You are using the tape gun wrong, to cut the tape all you gotta do is twist with a little pressure, has nothing to do with what type or tape is being used. Lmk when you do this, gosh I wish I can see your reaction. 🤙

[@CarlosJimenez-el8iw]

Alright

[@crow78376]

Sorry about the box

[@LHTPerformance]

It’s no problem.

[@eddiewong9509]

Try use a dc2 OE air box.

[@LHTPerformance]

I had a DC box in one my CRXs. I want to keep the battery in the stock location. The DC box looks best in the same position as the battery.

[@eddiewong9509]

@@LHTPerformance because I think the SIR air box diameter is kind of small for ITR engine. The ITR OE intake tube is way bigger. 😅

[@afireinside909]

Why no love for the cunky guys and offer the card short in 2xl???

[@LHTPerformance]

New shirts are ordered. They include some 2XLs

[@davidbondar8169]

Willing to sell ypur mugen headers